From: pawday-at-mail.ru@ffmpeg.org To: ffmpeg-devel@ffmpeg.org Cc: Pawday <pawday@mail.ru> Subject: [FFmpeg-devel] [PATCH] avcodec: Use preprocessors conditions Date: Tue, 17 Jan 2023 18:31:26 +0400 Message-ID: <20230117143125.1106-1-pawday@mail.ru> (raw) From: Pawday <pawday@mail.ru> Thank you Andreas Rheinhardt for review Here the fixes for runtime "else" conditions --- libavcodec/avcodec.c | 16 +++++++++++----- libavcodec/decode.c | 11 ++++++++--- libavcodec/encode.c | 13 ++++++++----- libavcodec/h264dec.c | 14 +++++++------- 4 files changed, 34 insertions(+), 20 deletions(-) diff --git a/libavcodec/avcodec.c b/libavcodec/avcodec.c index a85d3c2309..0e792aead9 100644 --- a/libavcodec/avcodec.c +++ b/libavcodec/avcodec.c @@ -403,10 +403,13 @@ void avcodec_flush_buffers(AVCodecContext *avctx) av_frame_unref(avci->buffer_frame); av_packet_unref(avci->buffer_pkt); - if (HAVE_THREADS && avctx->active_thread_type & FF_THREAD_FRAME) +#if HAVE_THREADS + if (avctx->active_thread_type & FF_THREAD_FRAME) ff_thread_flush(avctx); - else if (ffcodec(avctx->codec)->flush) +#else + if (ffcodec(avctx->codec)->flush) ffcodec(avctx->codec)->flush(avctx); +#endif } void avsubtitle_free(AVSubtitle *sub) @@ -441,12 +444,15 @@ av_cold int avcodec_close(AVCodecContext *avctx) if (avcodec_is_open(avctx)) { AVCodecInternal *avci = avctx->internal; - if (CONFIG_FRAME_THREAD_ENCODER && - avci->frame_thread_encoder && avctx->thread_count > 1) { +#if CONFIG_FRAME_THREAD_ENCODER + if (avci->frame_thread_encoder && avctx->thread_count > 1) { ff_frame_thread_encoder_free(avctx); } - if (HAVE_THREADS && avci->thread_ctx) +#endif +#if HAVE_THREADS + if (avci->thread_ctx) ff_thread_free(avctx); +#endif if (avci->needs_close && ffcodec(avctx->codec)->close) ffcodec(avctx->codec)->close(avctx); avci->byte_buffer_size = 0; diff --git a/libavcodec/decode.c b/libavcodec/decode.c index 6be2d3d6ed..54ffd0f203 100644 --- a/libavcodec/decode.c +++ b/libavcodec/decode.c @@ -300,10 +300,14 @@ static inline int decode_simple_internal(AVCodecContext *avctx, AVFrame *frame, return AVERROR_EOF; got_frame = 0; - - if (HAVE_THREADS && avctx->active_thread_type & FF_THREAD_FRAME) { +#if HAVE_THREADS + if (avctx->active_thread_type & FF_THREAD_FRAME) { ret = ff_thread_decode_frame(avctx, frame, &got_frame, pkt); - } else { + } +#endif + +#if !HAVE_THREADS + if (!(avctx->active_thread_type & FF_THREAD_FRAME)) { ret = codec->cb.decode(avctx, frame, &got_frame, pkt); if (!(codec->caps_internal & FF_CODEC_CAP_SETS_PKT_DTS)) @@ -321,6 +325,7 @@ static inline int decode_simple_internal(AVCodecContext *avctx, AVFrame *frame, } } } +#endif emms_c(); actual_got_frame = got_frame; diff --git a/libavcodec/encode.c b/libavcodec/encode.c index fbe2c97cd6..b19599e67e 100644 --- a/libavcodec/encode.c +++ b/libavcodec/encode.c @@ -269,17 +269,20 @@ static int encode_simple_internal(AVCodecContext *avctx, AVPacket *avpkt) got_packet = 0; av_assert0(codec->cb_type == FF_CODEC_CB_TYPE_ENCODE); - - if (CONFIG_FRAME_THREAD_ENCODER && avci->frame_thread_encoder) +#if CONFIG_FRAME_THREAD_ENCODER + if (avci->frame_thread_encoder) /* This will unref frame. */ ret = ff_thread_video_encode_frame(avctx, avpkt, frame, &got_packet); - else { +#endif +#if !CONFIG_FRAME_THREAD_ENCODER + if (!avci->frame_thread_encoder) { ret = ff_encode_encode_cb(avctx, avpkt, frame, &got_packet); #if FF_API_THREAD_SAFE_CALLBACKS if (frame) av_frame_unref(frame); #endif } +#endif // !CONFIG_FRAME_THREAD_ENCODER if (avci->draining && !got_packet) avci->draining_done = 1; @@ -670,11 +673,11 @@ int ff_encode_preinit(AVCodecContext *avctx) return AVERROR(ENOMEM); } - if (CONFIG_FRAME_THREAD_ENCODER) { +#if CONFIG_FRAME_THREAD_ENCODER ret = ff_frame_thread_encoder_init(avctx); if (ret < 0) return ret; - } +#endif return 0; } diff --git a/libavcodec/h264dec.c b/libavcodec/h264dec.c index 6ede4e8c9f..4538974dab 100644 --- a/libavcodec/h264dec.c +++ b/libavcodec/h264dec.c @@ -933,13 +933,13 @@ static int finalize_frame(H264Context *h, AVFrame *dst, H264Picture *out, int *g *got_frame = 1; - if (CONFIG_MPEGVIDEODEC) { - ff_print_debug_info2(h->avctx, dst, NULL, - out->mb_type, - out->qscale_table, - out->motion_val, - out->mb_width, out->mb_height, out->mb_stride, 1); - } +#if CONFIG_MPEGVIDEODEC + ff_print_debug_info2(h->avctx, dst, NULL, + out->mb_type, + out->qscale_table, + out->motion_val, + out->mb_width, out->mb_height, out->mb_stride, 1); +#endif } return 0; -- _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2023-01-17 14:36 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-17 14:31 pawday-at-mail.ru [this message] 2023-01-17 15:38 ` Hendrik Leppkes -- strict thread matches above, loose matches on Subject: below -- 2023-01-17 19:37 pawday-at-mail.ru 2023-01-17 11:38 pawday-at-mail.ru 2023-01-17 12:04 ` Andreas Rheinhardt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230117143125.1106-1-pawday@mail.ru \ --to=pawday-at-mail.ru@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=pawday@mail.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git