From: Derek Buitenhuis <derek.buitenhuis@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH] avformat: Rename IPFS to IPFS gateway Date: Fri, 9 Dec 2022 15:40:55 +0000 Message-ID: <20221209154055.21165-1-derek.buitenhuis@gmail.com> (raw) It is a URL rewriter for IPFS gateways, not an actual implementation of IPFS, and naming it as such was both incorrect and misleading. Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com> --- As was discussed at the developer meeting last week, presented here for comments. Personally I think libavformat is no place for URL rewriters pretending to be protocols, and think that URLs should be rewritten at the layer above avformat (i.e. nuke this entirely), but I figure this is less likely to get me abusive hate emails again to my personal mail - or at least fewer. --- Changelog | 2 +- configure | 4 ++-- libavformat/Makefile | 4 ++-- libavformat/ipfsgateway.c | 34 +++++++++++++++++----------------- libavformat/protocols.c | 4 ++-- 5 files changed, 24 insertions(+), 24 deletions(-) diff --git a/Changelog b/Changelog index af2dd65f8f..1e9e862406 100644 --- a/Changelog +++ b/Changelog @@ -30,7 +30,7 @@ version <next>: version 5.1: -- add ipfs/ipns protocol support +- add ipfs/ipns gateway support - dialogue enhance audio filter - dropped obsolete XvMC hwaccel - pcm-bluray encoder diff --git a/configure b/configure index f4eedfc207..af78d79716 100755 --- a/configure +++ b/configure @@ -3597,8 +3597,8 @@ udp_protocol_select="network" udplite_protocol_select="network" unix_protocol_deps="sys_un_h" unix_protocol_select="network" -ipfs_protocol_select="https_protocol" -ipns_protocol_select="https_protocol" +ipfs_gateway_protocol_select="https_protocol" +ipns_gateway_protocol_select="https_protocol" # external library protocols libamqp_protocol_deps="librabbitmq" diff --git a/libavformat/Makefile b/libavformat/Makefile index d7f198bf39..2699409e43 100644 --- a/libavformat/Makefile +++ b/libavformat/Makefile @@ -672,8 +672,8 @@ OBJS-$(CONFIG_SRTP_PROTOCOL) += srtpproto.o srtp.o OBJS-$(CONFIG_SUBFILE_PROTOCOL) += subfile.o OBJS-$(CONFIG_TEE_PROTOCOL) += teeproto.o tee_common.o OBJS-$(CONFIG_TCP_PROTOCOL) += tcp.o -OBJS-$(CONFIG_IPFS_PROTOCOL) += ipfsgateway.o -OBJS-$(CONFIG_IPNS_PROTOCOL) += ipfsgateway.o +OBJS-$(CONFIG_IPFS_GATEWAY_PROTOCOL) += ipfsgateway.o +OBJS-$(CONFIG_IPNS_GATEWAY_PROTOCOL) += ipfsgateway.o TLS-OBJS-$(CONFIG_GNUTLS) += tls_gnutls.o TLS-OBJS-$(CONFIG_LIBTLS) += tls_libtls.o TLS-OBJS-$(CONFIG_MBEDTLS) += tls_mbedtls.o diff --git a/libavformat/ipfsgateway.c b/libavformat/ipfsgateway.c index ce69d9055a..336a2603db 100644 --- a/libavformat/ipfsgateway.c +++ b/libavformat/ipfsgateway.c @@ -304,19 +304,19 @@ err: return ret; } -static int ipfs_read(URLContext *h, unsigned char *buf, int size) +static int ipfs_gateway_read(URLContext *h, unsigned char *buf, int size) { IPFSGatewayContext *c = h->priv_data; return ffurl_read(c->inner, buf, size); } -static int64_t ipfs_seek(URLContext *h, int64_t pos, int whence) +static int64_t ipfs_gateway_seek(URLContext *h, int64_t pos, int whence) { IPFSGatewayContext *c = h->priv_data; return ffurl_seek(c->inner, pos, whence); } -static int ipfs_close(URLContext *h) +static int ipfs_gateway_close(URLContext *h) { IPFSGatewayContext *c = h->priv_data; return ffurl_closep(&c->inner); @@ -329,29 +329,29 @@ static const AVOption options[] = { {NULL}, }; -static const AVClass ipfs_context_class = { - .class_name = "IPFS", +static const AVClass ipfs_gateway_context_class = { + .class_name = "IPFS Gateway", .item_name = av_default_item_name, .option = options, .version = LIBAVUTIL_VERSION_INT, }; -const URLProtocol ff_ipfs_protocol = { - .name = "ipfs", +const URLProtocol ff_ipfs_gateway_protocol = { + .name = "ipfs_gateway", .url_open2 = translate_ipfs_to_http, - .url_read = ipfs_read, - .url_seek = ipfs_seek, - .url_close = ipfs_close, + .url_read = ipfs_gateway_read, + .url_seek = ipfs_gateway_seek, + .url_close = ipfs_gateway_close, .priv_data_size = sizeof(IPFSGatewayContext), - .priv_data_class = &ipfs_context_class, + .priv_data_class = &ipfs_gateway_context_class, }; -const URLProtocol ff_ipns_protocol = { - .name = "ipns", +const URLProtocol ff_ipns_gateway_protocol = { + .name = "ipns_gateway", .url_open2 = translate_ipfs_to_http, - .url_read = ipfs_read, - .url_seek = ipfs_seek, - .url_close = ipfs_close, + .url_read = ipfs_gateway_read, + .url_seek = ipfs_gateway_seek, + .url_close = ipfs_gateway_close, .priv_data_size = sizeof(IPFSGatewayContext), - .priv_data_class = &ipfs_context_class, + .priv_data_class = &ipfs_gateway_context_class, }; diff --git a/libavformat/protocols.c b/libavformat/protocols.c index 8b7d1b940f..d3a7d4310b 100644 --- a/libavformat/protocols.c +++ b/libavformat/protocols.c @@ -72,8 +72,8 @@ extern const URLProtocol ff_libsrt_protocol; extern const URLProtocol ff_libssh_protocol; extern const URLProtocol ff_libsmbclient_protocol; extern const URLProtocol ff_libzmq_protocol; -extern const URLProtocol ff_ipfs_protocol; -extern const URLProtocol ff_ipns_protocol; +extern const URLProtocol ff_ipfs_gateway_protocol; +extern const URLProtocol ff_ipns_gateway_protocol; #include "libavformat/protocol_list.c" -- 2.38.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-12-09 15:41 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-09 15:40 Derek Buitenhuis [this message] 2022-12-09 15:45 ` Nicolas George 2022-12-09 15:52 ` Derek Buitenhuis 2022-12-09 15:53 ` Nicolas George 2022-12-12 15:48 ` Tomas Härdin 2022-12-13 12:44 ` Derek Buitenhuis 2022-12-13 12:48 ` Derek Buitenhuis 2022-12-14 17:34 ` Tomas Härdin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221209154055.21165-1-derek.buitenhuis@gmail.com \ --to=derek.buitenhuis@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git