From: Michael Niedermayer <michael@niedermayer.cc> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH v3 1/4] swscale/input: add rgbaf32 input support Date: Sun, 13 Nov 2022 22:24:53 +0100 Message-ID: <20221113212453.GF1814017@pb2> (raw) In-Reply-To: <20221103040010.1134-2-mindmark@gmail.com> [-- Attachment #1.1: Type: text/plain, Size: 4145 bytes --] On Wed, Nov 02, 2022 at 09:00:07PM -0700, mindmark@gmail.com wrote: > From: Mark Reid <mindmark@gmail.com> > > --- > libswscale/input.c | 172 +++++++++++++++++++++++++++++++++++++++++++++ > libswscale/utils.c | 4 ++ > 2 files changed, 176 insertions(+) > > diff --git a/libswscale/input.c b/libswscale/input.c > index 7ff7bfaa01..4683284b0b 100644 > --- a/libswscale/input.c > +++ b/libswscale/input.c > @@ -1284,6 +1284,136 @@ static void rgbaf16##endian_name##ToA_c(uint8_t *_dst, const uint8_t *_src, cons > rgbaf16_funcs_endian(le, 0) > rgbaf16_funcs_endian(be, 1) > > +#define rdpx(src) (is_be ? av_int2float(AV_RB32(&src)): av_int2float(AV_RL32(&src))) > + > +static av_always_inline void rgbaf32ToUV_half_endian(uint16_t *dstU, uint16_t *dstV, int is_be, > + const float *src, int width, > + int32_t *rgb2yuv, int comp) > +{ > + int32_t ru = rgb2yuv[RU_IDX], gu = rgb2yuv[GU_IDX], bu = rgb2yuv[BU_IDX]; > + int32_t rv = rgb2yuv[RV_IDX], gv = rgb2yuv[GV_IDX], bv = rgb2yuv[BV_IDX]; > + int i; > + for (i = 0; i < width; i++) { > + int r = (lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+0]), 0.0f, 65535.0f)) + > + lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+4]), 0.0f, 65535.0f))) >> 1; > + int g = (lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+1]), 0.0f, 65535.0f)) + > + lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+5]), 0.0f, 65535.0f))) >> 1; > + int b = (lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+2]), 0.0f, 65535.0f)) + > + lrintf(av_clipf(65535.0f * rdpx(src[i*(comp*2)+6]), 0.0f, 65535.0f))) >> 1; > + > + dstU[i] = (ru*r + gu*g + bu*b + (0x10001<<(RGB2YUV_SHIFT-1))) >> RGB2YUV_SHIFT; > + dstV[i] = (rv*r + gv*g + bv*b + (0x10001<<(RGB2YUV_SHIFT-1))) >> RGB2YUV_SHIFT; I would expect this sort of code to use 2 lrintf() and 2 av_clipf() not 6 > + } > +} > + > +static av_always_inline void rgbaf32ToUV_endian(uint16_t *dstU, uint16_t *dstV, int is_be, > + const float *src, int width, > + int32_t *rgb2yuv, int comp) > +{ > + int32_t ru = rgb2yuv[RU_IDX], gu = rgb2yuv[GU_IDX], bu = rgb2yuv[BU_IDX]; > + int32_t rv = rgb2yuv[RV_IDX], gv = rgb2yuv[GV_IDX], bv = rgb2yuv[BV_IDX]; > + int i; > + for (i = 0; i < width; i++) { > + int r = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+0]), 0.0f, 65535.0f)); > + int g = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+1]), 0.0f, 65535.0f)); > + int b = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+2]), 0.0f, 65535.0f)); > + > + dstU[i] = (ru*r + gu*g + bu*b + (0x10001<<(RGB2YUV_SHIFT-1))) >> RGB2YUV_SHIFT; > + dstV[i] = (rv*r + gv*g + bv*b + (0x10001<<(RGB2YUV_SHIFT-1))) >> RGB2YUV_SHIFT; > + } > +} > + > +static av_always_inline void rgbaf32ToY_endian(uint16_t *dst, const float *src, int is_be, > + int width, int32_t *rgb2yuv, int comp) > +{ > + int32_t ry = rgb2yuv[RY_IDX], gy = rgb2yuv[GY_IDX], by = rgb2yuv[BY_IDX]; > + int i; > + for (i = 0; i < width; i++) { > + int r = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+0]), 0.0f, 65535.0f)); > + int g = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+1]), 0.0f, 65535.0f)); > + int b = lrintf(av_clipf(65535.0f * rdpx(src[i*comp+2]), 0.0f, 65535.0f)); > + > + dst[i] = (ry*r + gy*g + by*b + (0x2001<<(RGB2YUV_SHIFT-1))) >> RGB2YUV_SHIFT; there is one output so there should be only need for one clip and one float->int thx [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Any man who breaks a law that conscience tells him is unjust and willingly accepts the penalty by staying in jail in order to arouse the conscience of the community on the injustice of the law is at that moment expressing the very highest respect for law. - Martin Luther King Jr [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 195 bytes --] [-- Attachment #2: Type: text/plain, Size: 251 bytes --] _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-11-13 21:25 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-03 4:00 [FFmpeg-devel] [PATCH v3 0/4] swscale rgbaf32 input/output support mindmark 2022-11-03 4:00 ` [FFmpeg-devel] [PATCH v3 1/4] swscale/input: add rgbaf32 input support mindmark 2022-11-13 21:24 ` Michael Niedermayer [this message] 2022-11-14 1:50 ` Mark Reid 2022-11-14 21:07 ` Michael Niedermayer 2022-11-14 22:23 ` Mark Reid 2022-11-03 4:00 ` [FFmpeg-devel] [PATCH v3 2/4] avfilter/vf_hflip: add support for packed rgb float formats mindmark 2022-11-13 21:30 ` Michael Niedermayer 2022-11-03 4:00 ` [FFmpeg-devel] [PATCH v3 3/4] avfilter/vf_transpose: " mindmark 2022-11-03 4:00 ` [FFmpeg-devel] [PATCH v3 4/4] swscale/output: add rgbaf32 output support mindmark 2022-11-12 23:48 ` [FFmpeg-devel] [PATCH v3 0/4] swscale rgbaf32 input/output support Mark Reid
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221113212453.GF1814017@pb2 \ --to=michael@niedermayer.cc \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git