* [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts
@ 2022-10-31 10:56 Wolfgang Haupt
2022-10-31 10:56 ` [FFmpeg-devel] [PATCH 1/1] Add "no packet" timeout option for mpegts Wolfgang Haupt
0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Haupt @ 2022-10-31 10:56 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Wolfgang Haupt
This fixes mpegts infinitely parsing streams that contain
only stuffed PATs, which apparently happens on some dead
livetv sources.
Wolfgang Haupt (1):
Add "no packet" timeout option for mpegts
libavformat/mpegts.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* [FFmpeg-devel] [PATCH 1/1] Add "no packet" timeout option for mpegts
2022-10-31 10:56 [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts Wolfgang Haupt
@ 2022-10-31 10:56 ` Wolfgang Haupt
2022-10-31 12:52 ` [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts Wolfgang Haupt
2022-10-31 12:55 ` Wolfgang Haupt
0 siblings, 2 replies; 5+ messages in thread
From: Wolfgang Haupt @ 2022-10-31 10:56 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Wolfgang Haupt
Retrieving an mpegts stream with only stuffed PAT,
results in endless reading.
This change adds a new timeout that specifies a
timespan in AV_TIME_BASE units until when a full
packet must be read successfully.
Signed-off-by: Wolfgang Haupt <haupt.wolfgang@gmail.com>
---
libavformat/mpegts.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/libavformat/mpegts.c b/libavformat/mpegts.c
index d97702fcd7..5b615cca63 100644
--- a/libavformat/mpegts.c
+++ b/libavformat/mpegts.c
@@ -32,6 +32,7 @@
#include "libavutil/opt.h"
#include "libavutil/avassert.h"
#include "libavutil/dovi_meta.h"
+#include "libavutil/time.h"
#include "libavcodec/avcodec.h"
#include "libavcodec/bytestream.h"
#include "libavcodec/get_bits.h"
@@ -180,6 +181,12 @@ struct MpegTSContext {
AVStream *epg_stream;
AVBufferPool* pools[32];
+
+ /**
+ * Timeout in AV_TIME_BASE units, until at least one packet is read
+ * from the stream.
+ */
+ int64_t packet_read_timeout;
};
#define MPEGTS_OPTIONS \
@@ -203,6 +210,8 @@ static const AVOption options[] = {
{.i64 = 0}, 0, 1, 0 },
{"max_packet_size", "maximum size of emitted packet", offsetof(MpegTSContext, max_packet_size), AV_OPT_TYPE_INT,
{.i64 = 204800}, 1, INT_MAX/2, AV_OPT_FLAG_DECODING_PARAM },
+ {"packet_read_timeout", "Maximum time utnil at least one packet is successfully read from the stream", offsetof(MpegTSContext, packet_read_timeout), AV_OPT_TYPE_INT64,
+ {.i64 = 0 }, 0, INT64_MAX, AV_OPT_FLAG_DECODING_PARAM },
{ NULL },
};
@@ -2972,6 +2981,8 @@ static int handle_packets(MpegTSContext *ts, int64_t nb_packets)
const uint8_t *data;
int64_t packet_num;
int ret = 0;
+ time_t start = 0;
+ time_t now = 0;
if (avio_tell(s->pb) != ts->last_pos) {
int i;
@@ -2996,8 +3007,15 @@ static int handle_packets(MpegTSContext *ts, int64_t nb_packets)
ts->stop_parse = 0;
packet_num = 0;
memset(packet + TS_PACKET_SIZE, 0, AV_INPUT_BUFFER_PADDING_SIZE);
+ start = av_gettime_relative();
for (;;) {
packet_num++;
+ now = av_gettime_relative();
+ if (now - start > ts->packet_read_timeout) {
+ av_log(ts->stream, AV_LOG_TRACE, "No packet after %"PRId64"ms\n", ts->packet_read_timeout/1000);
+ break;
+ }
+
if (nb_packets != 0 && packet_num >= nb_packets ||
ts->stop_parse > 1) {
ret = AVERROR(EAGAIN);
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts
2022-10-31 10:56 ` [FFmpeg-devel] [PATCH 1/1] Add "no packet" timeout option for mpegts Wolfgang Haupt
@ 2022-10-31 12:52 ` Wolfgang Haupt
2022-10-31 12:55 ` Wolfgang Haupt
1 sibling, 0 replies; 5+ messages in thread
From: Wolfgang Haupt @ 2022-10-31 12:52 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Wolfgang Haupt
This fixes mpegts infinitely parsing streams that contain
only stuffed PATs, which apparently happens on some dead
livetv sources.
Wolfgang Haupt (1):
Add "no packet" timeout option for mpegts
libavformat/mpegts.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts
2022-10-31 10:56 ` [FFmpeg-devel] [PATCH 1/1] Add "no packet" timeout option for mpegts Wolfgang Haupt
2022-10-31 12:52 ` [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts Wolfgang Haupt
@ 2022-10-31 12:55 ` Wolfgang Haupt
2022-10-31 12:55 ` [FFmpeg-devel] [PATCH] avformat/mpegts: Add "no packet" timeout option Wolfgang Haupt
1 sibling, 1 reply; 5+ messages in thread
From: Wolfgang Haupt @ 2022-10-31 12:55 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Wolfgang Haupt
This fixes mpegts infinitely parsing streams that contain
only stuffed PATs, which apparently happens on some dead
livetv sources.
Wolfgang Haupt (1):
Add "no packet" timeout option for mpegts
libavformat/mpegts.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* [FFmpeg-devel] [PATCH] avformat/mpegts: Add "no packet" timeout option
2022-10-31 12:55 ` Wolfgang Haupt
@ 2022-10-31 12:55 ` Wolfgang Haupt
0 siblings, 0 replies; 5+ messages in thread
From: Wolfgang Haupt @ 2022-10-31 12:55 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Wolfgang Haupt
Retrieving an mpegts stream with only stuffed PAT,
results in endless reading.
This change adds a new timeout that specifies a
timespan in AV_TIME_BASE units until when a full
packet must be read successfully.
Signed-off-by: Wolfgang Haupt <haupt.wolfgang@gmail.com>
---
libavformat/mpegts.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/libavformat/mpegts.c b/libavformat/mpegts.c
index d97702fcd7..45bf82f61c 100644
--- a/libavformat/mpegts.c
+++ b/libavformat/mpegts.c
@@ -32,6 +32,7 @@
#include "libavutil/opt.h"
#include "libavutil/avassert.h"
#include "libavutil/dovi_meta.h"
+#include "libavutil/time.h"
#include "libavcodec/avcodec.h"
#include "libavcodec/bytestream.h"
#include "libavcodec/get_bits.h"
@@ -180,6 +181,12 @@ struct MpegTSContext {
AVStream *epg_stream;
AVBufferPool* pools[32];
+
+ /**
+ * Timeout in AV_TIME_BASE units, until at least one packet is read
+ * from the stream.
+ */
+ int64_t packet_read_timeout;
};
#define MPEGTS_OPTIONS \
@@ -203,6 +210,8 @@ static const AVOption options[] = {
{.i64 = 0}, 0, 1, 0 },
{"max_packet_size", "maximum size of emitted packet", offsetof(MpegTSContext, max_packet_size), AV_OPT_TYPE_INT,
{.i64 = 204800}, 1, INT_MAX/2, AV_OPT_FLAG_DECODING_PARAM },
+ {"packet_read_timeout", "Maximum time utnil at least one packet is successfully read from the stream", offsetof(MpegTSContext, packet_read_timeout), AV_OPT_TYPE_INT64,
+ {.i64 = 0 }, 0, INT64_MAX, AV_OPT_FLAG_DECODING_PARAM },
{ NULL },
};
@@ -2972,6 +2981,7 @@ static int handle_packets(MpegTSContext *ts, int64_t nb_packets)
const uint8_t *data;
int64_t packet_num;
int ret = 0;
+ time_t start = 0;
if (avio_tell(s->pb) != ts->last_pos) {
int i;
@@ -2996,8 +3006,14 @@ static int handle_packets(MpegTSContext *ts, int64_t nb_packets)
ts->stop_parse = 0;
packet_num = 0;
memset(packet + TS_PACKET_SIZE, 0, AV_INPUT_BUFFER_PADDING_SIZE);
+ start = av_gettime_relative();
for (;;) {
packet_num++;
+ if (ts->packet_read_timeout > 0 && (av_gettime_relative() - start > ts->packet_read_timeout)) {
+ av_log(ts->stream, AV_LOG_TRACE, "No packet after %"PRId64"ms\n", ts->packet_read_timeout/1000);
+ break;
+ }
+
if (nb_packets != 0 && packet_num >= nb_packets ||
ts->stop_parse > 1) {
ret = AVERROR(EAGAIN);
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-31 12:55 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-31 10:56 [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts Wolfgang Haupt
2022-10-31 10:56 ` [FFmpeg-devel] [PATCH 1/1] Add "no packet" timeout option for mpegts Wolfgang Haupt
2022-10-31 12:52 ` [FFmpeg-devel] [PATCH 0/1] Add "no packet timeout" to mpegts Wolfgang Haupt
2022-10-31 12:55 ` Wolfgang Haupt
2022-10-31 12:55 ` [FFmpeg-devel] [PATCH] avformat/mpegts: Add "no packet" timeout option Wolfgang Haupt
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git