From: remi@remlab.net To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH 4/5] lavu/riscv: byte-swap operations Date: Tue, 6 Sep 2022 19:50:26 +0300 Message-ID: <20220906165027.91347-4-remi@remlab.net> (raw) In-Reply-To: <12048155.O9o76ZdvQC@basile.remlab.net> From: Rémi Denis-Courmont <remi@remlab.net> If the target supports the Basic bit-manipulation (Zbb) extension, then the REV8 instruction is available to reverse byte order. Note that this instruction only exists at the "XLEN" register size, so we need to right shift the result down to the data width. If Zbb is not supported, then this patchset does nothing. Support for run-time detection is left for the future. Currently, there are no bits in auxv/ELF HWCAP for Z-extensions, so there are no clean ways to do this. --- libavutil/bswap.h | 2 ++ libavutil/riscv/bswap.h | 74 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+) create mode 100644 libavutil/riscv/bswap.h diff --git a/libavutil/bswap.h b/libavutil/bswap.h index 91cb79538d..4840ab433f 100644 --- a/libavutil/bswap.h +++ b/libavutil/bswap.h @@ -40,6 +40,8 @@ # include "arm/bswap.h" #elif ARCH_AVR32 # include "avr32/bswap.h" +#elif ARCH_RISCV +# include "riscv/bswap.h" #elif ARCH_SH4 # include "sh4/bswap.h" #elif ARCH_X86 diff --git a/libavutil/riscv/bswap.h b/libavutil/riscv/bswap.h new file mode 100644 index 0000000000..de1429c0f7 --- /dev/null +++ b/libavutil/riscv/bswap.h @@ -0,0 +1,74 @@ +/* + * This file is part of FFmpeg. + * + * FFmpeg is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * FFmpeg is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with FFmpeg; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef AVUTIL_RISCV_BSWAP_H +#define AVUTIL_RISCV_BSWAP_H + +#include <stdint.h> +#include "config.h" +#include "libavutil/attributes.h" + +#if defined (__riscv_zbb) && (__riscv_zbb > 0) && HAVE_INLINE_ASM + +static av_always_inline av_const uintptr_t av_bswap_xlen(uintptr_t x) +{ + uintptr_t y; + + __asm__("rev8 %0, %1" : "=r" (y) : "r" (x)); + return y; +} + +#define av_bswap16 av_bswap16 + +static av_always_inline av_const uint_fast16_t av_bswap16(uint_fast16_t x) +{ + return av_bswap_xlen(x) >> (__riscv_xlen - 16); +} + +#if (__riscv_xlen == 32) +#define av_bswap32 av_bswap_xlen +#define av_bswap64 av_bswap64 + +static av_always_inline av_const uint64_t av_bswap64(uint64_t x) +{ + return (((uint64_t)av_bswap32(x)) << 32) | av_bswap32(x >> 32); +} + +#else +#define av_bswap32 av_bswap32 + +static av_always_inline av_const uint_fast32_t av_bswap32(uint_fast32_t x) +{ + return av_bswap_xlen(x) >> (__riscv_xlen - 32); +} + +#if (__riscv_xlen == 64) +#define av_bswap64 av_bswap_xlen + +#else +#define av_bswap64 av_bswap64 + +static av_always_inline av_const uint_fast64_t av_bswap64(uint_fast64_t x) +{ + return av_bswap_xlen(x) >> (__riscv_xlen - 64); +} + +#endif /* __riscv_xlen > 64 */ +#endif /* __riscv_xlen > 32 */ +#endif /* __riscv_zbb */ +#endif /* AVUTIL_RISCV_BSWAP_H */ -- 2.37.2 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-09-06 16:50 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-06 16:49 [FFmpeg-devel] [PATCHv2 0/5] RISC-V scalar and Zbb support Rémi Denis-Courmont 2022-09-06 16:50 ` [FFmpeg-devel] [PATCH 1/5] doc: reference the RISC-V specification remi 2022-09-06 16:50 ` [FFmpeg-devel] [PATCH 2/5] lavu/riscv: AV_READ_TIME cycle counter remi 2022-09-06 16:50 ` [FFmpeg-devel] [PATCH 3/5] configure/riscv: detect fast CLZ remi 2022-09-06 16:50 ` remi [this message] 2022-09-06 16:50 ` [FFmpeg-devel] [PATCH 5/5] lavu/riscv: add <intmath.h> optimisations remi 2022-09-06 17:00 ` Rémi Denis-Courmont 2022-09-06 16:53 ` remi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220906165027.91347-4-remi@remlab.net \ --to=remi@remlab.net \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git