From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH 4/6] libavcodec/qsvenc: Add intra refresh reset support to qsvenc Date: Thu, 18 Aug 2022 14:59:10 +0800 Message-ID: <20220818065912.158693-4-wenbin.chen@intel.com> (raw) In-Reply-To: <20220818065912.158693-1-wenbin.chen@intel.com> Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> --- doc/encoders.texi | 7 +++++++ libavcodec/qsvenc.c | 33 +++++++++++++++++++++++++++++++++ libavcodec/qsvenc.h | 5 +++++ 3 files changed, 45 insertions(+) diff --git a/doc/encoders.texi b/doc/encoders.texi index 48fe73fd33..b28b1f7f0b 100644 --- a/doc/encoders.texi +++ b/doc/encoders.texi @@ -3351,6 +3351,13 @@ Change this value to reset qsv codec's MaxFrameSize configuration. @item @var{gop_size} Change this value to reset qsv codec's gop configuration. + +@item @var{int_ref_type} +@item @var{int_ref_cycle_size} +@item @var{int_ref_qp_delta} +@item @var{int_ref_cycle_dist} +Supported in h264_qsv and hevc_qsv. +Change these value to reset qsv codec's Intra Refresh configuration. @end table @subsection H264 options diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c index b3820e4fe0..dbb1f49101 100644 --- a/libavcodec/qsvenc.c +++ b/libavcodec/qsvenc.c @@ -832,10 +832,13 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) q->old_max_frame_size = q->max_frame_size; if (q->int_ref_type >= 0) q->extco2.IntRefType = q->int_ref_type; + q->old_int_ref_type = q->int_ref_type; if (q->int_ref_cycle_size >= 0) q->extco2.IntRefCycleSize = q->int_ref_cycle_size; + q->old_int_ref_cycle_size = q->int_ref_cycle_size; if (q->int_ref_qp_delta != INT16_MIN) q->extco2.IntRefQPDelta = q->int_ref_qp_delta; + q->old_int_ref_qp_delta = q->int_ref_qp_delta; if (q->max_slice_size >= 0) q->extco2.MaxSliceSize = q->max_slice_size; q->extco2.DisableDeblockingIdc = q->dblk_idc; @@ -920,6 +923,7 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) } if (q->int_ref_cycle_dist >= 0) q->extco3.IntRefCycleDist = q->int_ref_cycle_dist; + q->old_int_ref_cycle_dist = q->int_ref_cycle_dist; if (q->low_delay_brc >= 0) q->extco3.LowDelayBRC = q->low_delay_brc ? MFX_CODINGOPTION_ON : MFX_CODINGOPTION_OFF; if (q->max_frame_size_i >= 0) @@ -1707,6 +1711,34 @@ static int update_gop_size(AVCodecContext *avctx, QSVEncContext *q) return updated; } +static int update_rir(AVCodecContext *avctx, QSVEncContext *q) +{ + int updated = 0; + + if (avctx->codec_id != AV_CODEC_ID_H264 && avctx->codec_id != AV_CODEC_ID_HEVC) + return 0; + + UPDATE_PARAM(q->old_int_ref_type, q->int_ref_type); + UPDATE_PARAM(q->old_int_ref_cycle_size, q->int_ref_cycle_size); + UPDATE_PARAM(q->old_int_ref_qp_delta, q->int_ref_qp_delta); + UPDATE_PARAM(q->old_int_ref_cycle_dist, q->int_ref_cycle_dist); + if (!updated) + return 0; + + q->extco2.IntRefType = FFMAX(0, q->int_ref_type); + q->extco2.IntRefCycleSize = FFMAX(0, q->int_ref_cycle_size); + q->extco2.IntRefQPDelta = + q->int_ref_qp_delta != INT16_MIN ? q->int_ref_qp_delta : 0; + q->extco3.IntRefCycleDist = FFMAX(0, q->int_ref_cycle_dist); + av_log(avctx, AV_LOG_DEBUG, + "Reset IntRefType: %d; IntRefCycleSize: %d; " + "IntRefQPDelta: %d; IntRefCycleDist: %d\n", + q->extco2.IntRefType, q->extco2.IntRefCycleSize, + q->extco2.IntRefQPDelta, q->extco3.IntRefCycleDist); + + return updated; +} + static int update_parameters(AVCodecContext *avctx, QSVEncContext *q, const AVFrame *frame) { @@ -1718,6 +1750,7 @@ static int update_parameters(AVCodecContext *avctx, QSVEncContext *q, needReset = update_qp(avctx, q); needReset |= update_max_frame_size(avctx, q); needReset |= update_gop_size(avctx, q); + needReset |= update_rir(avctx, q); if (!needReset) return 0; diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h index fdedae28dd..5a395d422e 100644 --- a/libavcodec/qsvenc.h +++ b/libavcodec/qsvenc.h @@ -239,6 +239,11 @@ typedef struct QSVEncContext { int old_max_frame_size; // This is used for gop reset int old_gop_size; + // These are used for intra refresh reset + int old_int_ref_type; + int old_int_ref_cycle_size; + int old_int_ref_qp_delta; + int old_int_ref_cycle_dist; } QSVEncContext; int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q); -- 2.32.0 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-18 7:02 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-18 6:59 [FFmpeg-devel] [PATCH 1/6] libavcodec/qsvenc: Add max_frame_size reset support to qsv Wenbin Chen 2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 2/6] libavcodec/qsvenc: Add gop_size reset support to qsvenc Wenbin Chen 2022-09-06 1:53 ` Xiang, Haihao 2022-09-06 8:44 ` Chen, Wenbin 2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 3/6] libavcodec/qsvenc: Add "slice" intra refresh type " Wenbin Chen 2022-08-18 6:59 ` Wenbin Chen [this message] 2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 5/6] libavcodec/qsvenc: Add max/min qp reset support in qsvenc Wenbin Chen 2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 6/6] libavcodec/qsvenc: Add low_delay_brc reset support to qsvenc Wenbin Chen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220818065912.158693-4-wenbin.chen@intel.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git