From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH 2/6] libavcodec/qsvenc: Add gop_size reset support to qsvenc
Date: Thu, 18 Aug 2022 14:59:08 +0800
Message-ID: <20220818065912.158693-2-wenbin.chen@intel.com> (raw)
In-Reply-To: <20220818065912.158693-1-wenbin.chen@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
---
doc/encoders.texi | 3 +++
libavcodec/qsvenc.c | 18 +++++++++++++++++-
libavcodec/qsvenc.h | 2 ++
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/doc/encoders.texi b/doc/encoders.texi
index 69fa46f3ea..9fb63856b1 100644
--- a/doc/encoders.texi
+++ b/doc/encoders.texi
@@ -3348,6 +3348,9 @@ Change these value to reset qsv codec's qp configuration.
@item @var{max_frame_size}
Supported in h264_qsv and hevc_qsv.
Change this value to reset qsv codec's MaxFrameSize configuration.
+
+@item @var{gop_size}
+Change this value to reset qsv codec's gop configuration.
@end table
@subsection H264 options
diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
index c911b81e7d..b3820e4fe0 100644
--- a/libavcodec/qsvenc.c
+++ b/libavcodec/qsvenc.c
@@ -635,6 +635,7 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q)
q->param.mfx.CodecProfile = q->profile;
q->param.mfx.TargetUsage = avctx->compression_level;
q->param.mfx.GopPicSize = FFMAX(0, avctx->gop_size);
+ q->old_gop_size = avctx->gop_size;
q->param.mfx.GopRefDist = FFMAX(-1, avctx->max_b_frames) + 1;
q->param.mfx.GopOptFlag = avctx->flags & AV_CODEC_FLAG_CLOSED_GOP ?
MFX_GOP_CLOSED : MFX_GOP_STRICT;
@@ -1692,16 +1693,31 @@ static int update_max_frame_size(AVCodecContext *avctx, QSVEncContext *q)
return updated;
}
+static int update_gop_size(AVCodecContext *avctx, QSVEncContext *q)
+{
+ int updated = 0;
+ UPDATE_PARAM(q->old_gop_size, avctx->gop_size);
+ if (!updated)
+ return 0;
+
+ q->param.mfx.GopPicSize = FFMAX(0, avctx->gop_size);
+ av_log(avctx, AV_LOG_DEBUG, "reset GopPicSize to %d\n",
+ q->param.mfx.GopPicSize);
+
+ return updated;
+}
+
static int update_parameters(AVCodecContext *avctx, QSVEncContext *q,
const AVFrame *frame)
{
int needReset = 0, ret = 0;
- if (!frame)
+ if (!frame || avctx->codec_id == AV_CODEC_ID_MJPEG)
return 0;
needReset = update_qp(avctx, q);
needReset |= update_max_frame_size(avctx, q);
+ needReset |= update_gop_size(avctx, q);
if (!needReset)
return 0;
diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
index c452c5b806..fdedae28dd 100644
--- a/libavcodec/qsvenc.h
+++ b/libavcodec/qsvenc.h
@@ -237,6 +237,8 @@ typedef struct QSVEncContext {
float old_b_quant_offset;
// This is used for max_frame_size reset
int old_max_frame_size;
+ // This is used for gop reset
+ int old_gop_size;
} QSVEncContext;
int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q);
--
2.32.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-18 7:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-18 6:59 [FFmpeg-devel] [PATCH 1/6] libavcodec/qsvenc: Add max_frame_size reset support to qsv Wenbin Chen
2022-08-18 6:59 ` Wenbin Chen [this message]
2022-09-06 1:53 ` [FFmpeg-devel] [PATCH 2/6] libavcodec/qsvenc: Add gop_size reset support to qsvenc Xiang, Haihao
2022-09-06 8:44 ` Chen, Wenbin
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 3/6] libavcodec/qsvenc: Add "slice" intra refresh type " Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 4/6] libavcodec/qsvenc: Add intra refresh reset support " Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 5/6] libavcodec/qsvenc: Add max/min qp reset support in qsvenc Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 6/6] libavcodec/qsvenc: Add low_delay_brc reset support to qsvenc Wenbin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220818065912.158693-2-wenbin.chen@intel.com \
--to=wenbin.chen-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git