From: Philip Langdale <philipl@overt.org> To: ffmpeg-devel@ffmpeg.org Cc: Philip Langdale <philipl@overt.org> Subject: [FFmpeg-devel] [PATCH 2/3] lavc/vaapi: Add support for remaining 10/12bit profiles Date: Sun, 14 Aug 2022 14:33:12 -0700 Message-ID: <20220814213313.37948-3-philipl@overt.org> (raw) In-Reply-To: <20220814213313.37948-1-philipl@overt.org> With the necessary pixel formats defined, we can now expose support for the remaining 10/12bit combinations that VAAPI can handle. Specifically, we are adding support for: * HEVC ** 12bit 420 ** 10bit 422 ** 12bit 422 ** 10bit 444 ** 12bit 444 * VP9 ** 10bit 422 ** 10bit 444 These obviously require actual hardware support to be usable, but where that exists, it is now enabled. I had to make some adjustments to the encode logic for matching bit depth as the existing code assumed that the picture depth and the pixel format depth were always the same, which is not true for 12bit content which uses 16bit pixel formats. Signed-off-by: Philip Langdale <philipl@overt.org> --- libavcodec/hevcdec.c | 8 ++++++++ libavcodec/vaapi_decode.c | 13 +++++++++++++ libavcodec/vaapi_encode.c | 19 +++++++++++++++---- libavcodec/vaapi_encode_h265.c | 10 ++++++++-- libavcodec/vaapi_encode_vp9.c | 4 +++- libavcodec/vaapi_hevc.c | 11 ++++++++++- libavutil/hwcontext_vaapi.c | 12 ++++++++++++ 7 files changed, 69 insertions(+), 8 deletions(-) diff --git a/libavcodec/hevcdec.c b/libavcodec/hevcdec.c index f1be8af2cd..1a895800a6 100644 --- a/libavcodec/hevcdec.c +++ b/libavcodec/hevcdec.c @@ -481,11 +481,19 @@ static enum AVPixelFormat get_format(HEVCContext *s, const HEVCSPS *sps) #endif case AV_PIX_FMT_YUV420P12: case AV_PIX_FMT_YUV444P12: +#if CONFIG_HEVC_VAAPI_HWACCEL + *fmt++ = AV_PIX_FMT_VAAPI; +#endif #if CONFIG_HEVC_VDPAU_HWACCEL *fmt++ = AV_PIX_FMT_VDPAU; #endif #if CONFIG_HEVC_NVDEC_HWACCEL *fmt++ = AV_PIX_FMT_CUDA; +#endif + break; + case AV_PIX_FMT_YUV422P12: +#if CONFIG_HEVC_VAAPI_HWACCEL + *fmt++ = AV_PIX_FMT_VAAPI; #endif break; } diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c index bc2d3ed803..9ba7dfd886 100644 --- a/libavcodec/vaapi_decode.c +++ b/libavcodec/vaapi_decode.c @@ -262,16 +262,28 @@ static const struct { MAP(YUY2, YUYV422), #ifdef VA_FOURCC_Y210 MAP(Y210, Y210), +#endif +#ifdef VA_FOURCC_Y216 + MAP(Y216, Y216), #endif // 4:4:0 MAP(422V, YUV440P), // 4:4:4 MAP(444P, YUV444P), MAP(AYUV, VUYA), +#ifdef VA_FOURCC_Y410 + MAP(Y410, Y410), +#endif +#ifdef VA_FOURCC_Y416 + MAP(Y416, Y416), +#endif // 4:2:0 10-bit #ifdef VA_FOURCC_P010 MAP(P010, P010), #endif +#ifdef VA_FOURCC_P016 + MAP(P016, P016), +#endif #ifdef VA_FOURCC_I010 MAP(I010, YUV420P10), #endif @@ -415,6 +427,7 @@ static const struct { #if VA_CHECK_VERSION(0, 39, 0) MAP(VP9, VP9_1, VP9Profile1 ), MAP(VP9, VP9_2, VP9Profile2 ), + MAP(VP9, VP9_3, VP9Profile3 ), #endif #if VA_CHECK_VERSION(1, 8, 0) MAP(AV1, AV1_MAIN, AV1Profile0), diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c index f13daa5cff..1cf11c4cd5 100644 --- a/libavcodec/vaapi_encode.c +++ b/libavcodec/vaapi_encode.c @@ -1305,7 +1305,11 @@ static const VAAPIEncodeRTFormat vaapi_encode_rt_formats[] = { { "YUV420", VA_RT_FORMAT_YUV420, 8, 3, 1, 1 }, { "YUV422", VA_RT_FORMAT_YUV422, 8, 3, 1, 0 }, #if VA_CHECK_VERSION(1, 2, 0) + { "YUV420_12", VA_RT_FORMAT_YUV420_12, 12, 3, 1, 1 }, { "YUV422_10", VA_RT_FORMAT_YUV422_10, 10, 3, 1, 0 }, + { "YUV422_12", VA_RT_FORMAT_YUV422_12, 12, 3, 1, 0 }, + { "YUV444_10", VA_RT_FORMAT_YUV444_10, 10, 4, 0, 0 }, + { "YUV444_12", VA_RT_FORMAT_YUV444_12, 12, 4, 0, 0 }, #endif { "YUV444", VA_RT_FORMAT_YUV444, 8, 3, 0, 0 }, { "AYUV", VA_RT_FORMAT_YUV444, 8, 4, 0, 0 }, @@ -1342,7 +1346,7 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx) VAConfigAttrib rt_format_attr; const VAAPIEncodeRTFormat *rt_format; const char *profile_string, *entrypoint_string; - int i, j, n, depth, err; + int i, j, n, depth, logical_depth, err; if (ctx->low_power) { @@ -1365,7 +1369,9 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx) } depth = desc->comp[0].depth; for (i = 1; i < desc->nb_components; i++) { - if (desc->comp[i].depth != depth) { + // We do not apply this depth requirement to the fourth component as + // that will be the alpha channel when present, which can be smaller. + if (i < 3 && desc->comp[i].depth != depth) { av_log(avctx, AV_LOG_ERROR, "Invalid input pixfmt (%s).\n", desc->name); return AVERROR(EINVAL); @@ -1391,8 +1397,11 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx) av_assert0(ctx->codec->profiles); for (i = 0; (ctx->codec->profiles[i].av_profile != FF_PROFILE_UNKNOWN); i++) { + profile = &ctx->codec->profiles[i]; - if (depth != profile->depth || + // Look for a 16bit format if the profile depth is > 10bit + logical_depth = profile->depth > 10 ? 16 : profile->depth; + if (depth != logical_depth || desc->nb_components != profile->nb_components) continue; if (desc->nb_components > 1 && @@ -1476,7 +1485,9 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx) for (i = 0; i < FF_ARRAY_ELEMS(vaapi_encode_rt_formats); i++) { rt_format = &vaapi_encode_rt_formats[i]; - if (rt_format->depth == depth && + // Look for a 16bit pixel format if the rt format depth is > 10bit + logical_depth = rt_format->depth > 10 ? 16 : rt_format->depth; + if (logical_depth == depth && rt_format->nb_components == profile->nb_components && rt_format->log2_chroma_w == profile->log2_chroma_w && rt_format->log2_chroma_h == profile->log2_chroma_h) diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c index 1de323af78..1a65fb9ebf 100644 --- a/libavcodec/vaapi_encode_h265.c +++ b/libavcodec/vaapi_encode_h265.c @@ -283,7 +283,9 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx) return AVERROR(EINVAL); } } - bit_depth = desc->comp[0].depth; + // Bit depth must be taken from the profile, as the pixel format will be + // 16bit for >= 12bit content. + bit_depth = ctx->profile->depth; // VPS @@ -1276,10 +1278,14 @@ static const VAAPIEncodeProfile vaapi_encode_h265_profiles[] = { { FF_PROFILE_HEVC_REXT, 10, 3, 1, 1, VAProfileHEVCMain10 }, #endif #if VA_CHECK_VERSION(1, 2, 0) + { FF_PROFILE_HEVC_REXT, 12, 3, 1, 1, VAProfileHEVCMain12 }, { FF_PROFILE_HEVC_REXT, 8, 3, 1, 0, VAProfileHEVCMain422_10 }, { FF_PROFILE_HEVC_REXT, 10, 3, 1, 0, VAProfileHEVCMain422_10 }, - // Four channels because this uses the AYUV format which has Alpha + { FF_PROFILE_HEVC_REXT, 12, 3, 1, 0, VAProfileHEVCMain422_12 }, + // Four channels because these use formats which have Alpha { FF_PROFILE_HEVC_REXT, 8, 4, 0, 0, VAProfileHEVCMain444 }, + { FF_PROFILE_HEVC_REXT, 10, 4, 0, 0, VAProfileHEVCMain444_10 }, + { FF_PROFILE_HEVC_REXT, 12, 4, 0, 0, VAProfileHEVCMain444_12 }, #endif { FF_PROFILE_UNKNOWN } }; diff --git a/libavcodec/vaapi_encode_vp9.c b/libavcodec/vaapi_encode_vp9.c index 9b455e10c9..e6c7f01f11 100644 --- a/libavcodec/vaapi_encode_vp9.c +++ b/libavcodec/vaapi_encode_vp9.c @@ -228,9 +228,11 @@ static av_cold int vaapi_encode_vp9_configure(AVCodecContext *avctx) static const VAAPIEncodeProfile vaapi_encode_vp9_profiles[] = { { FF_PROFILE_VP9_0, 8, 3, 1, 1, VAProfileVP9Profile0 }, - // Four channels because this uses the AYUV format which has Alpha + // Four channels because this uses a format which has Alpha { FF_PROFILE_VP9_1, 8, 4, 0, 0, VAProfileVP9Profile1 }, { FF_PROFILE_VP9_2, 10, 3, 1, 1, VAProfileVP9Profile2 }, + // Four channels because this uses a format which has Alpha + { FF_PROFILE_VP9_3, 10, 4, 0, 0, VAProfileVP9Profile3 }, { FF_PROFILE_UNKNOWN } }; diff --git a/libavcodec/vaapi_hevc.c b/libavcodec/vaapi_hevc.c index d82975979a..20fb36adfa 100644 --- a/libavcodec/vaapi_hevc.c +++ b/libavcodec/vaapi_hevc.c @@ -567,15 +567,24 @@ VAProfile ff_vaapi_parse_hevc_rext_profile(AVCodecContext *avctx) } #if VA_CHECK_VERSION(1, 2, 0) - if (!strcmp(profile->name, "Main 4:2:2 10") || + if (!strcmp(profile->name, "Main 12") || + !strcmp(profile->name, "Main 12 Intra")) + return VAProfileHEVCMain12; + else if (!strcmp(profile->name, "Main 4:2:2 10") || !strcmp(profile->name, "Main 4:2:2 10 Intra")) return VAProfileHEVCMain422_10; + else if (!strcmp(profile->name, "Main 4:2:2 12") || + !strcmp(profile->name, "Main 4:2:2 12 Intra")) + return VAProfileHEVCMain422_12; else if (!strcmp(profile->name, "Main 4:4:4") || !strcmp(profile->name, "Main 4:4:4 Intra")) return VAProfileHEVCMain444; else if (!strcmp(profile->name, "Main 4:4:4 10") || !strcmp(profile->name, "Main 4:4:4 10 Intra")) return VAProfileHEVCMain444_10; + else if (!strcmp(profile->name, "Main 4:4:4 12") || + !strcmp(profile->name, "Main 4:4:4 12 Intra")) + return VAProfileHEVCMain444_12; #else av_log(avctx, AV_LOG_WARNING, "HEVC profile %s is " "not supported with this VA version.\n", profile->name); diff --git a/libavutil/hwcontext_vaapi.c b/libavutil/hwcontext_vaapi.c index 2ee5145727..c3e79907fd 100644 --- a/libavutil/hwcontext_vaapi.c +++ b/libavutil/hwcontext_vaapi.c @@ -121,6 +121,9 @@ static const VAAPIFormatDescriptor vaapi_format_map[] = { MAP(YUY2, YUV422, YUYV422, 0), #ifdef VA_FOURCC_Y210 MAP(Y210, YUV422_10, Y210, 0), +#endif +#ifdef VA_FOURCC_Y216 + MAP(Y216, YUV422_12, Y216, 0), #endif MAP(411P, YUV411, YUV411P, 0), MAP(422V, YUV422, YUV440P, 0), @@ -129,6 +132,9 @@ static const VAAPIFormatDescriptor vaapi_format_map[] = { MAP(Y800, YUV400, GRAY8, 0), #ifdef VA_FOURCC_P010 MAP(P010, YUV420_10BPP, P010, 0), +#endif +#ifdef VA_FOURCC_P016 + MAP(P016, YUV420_12, P016, 0), #endif MAP(BGRA, RGB32, BGRA, 0), MAP(BGRX, RGB32, BGR0, 0), @@ -143,6 +149,12 @@ static const VAAPIFormatDescriptor vaapi_format_map[] = { #ifdef VA_FOURCC_X2R10G10B10 MAP(X2R10G10B10, RGB32_10, X2RGB10, 0), #endif +#ifdef VA_FOURCC_Y410 + MAP(Y410, YUV444_10, Y410, 0), +#endif +#ifdef VA_FOURCC_Y416 + MAP(Y416, YUV444_12, Y416, 0), +#endif }; #undef MAP -- 2.34.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-14 21:34 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-14 21:33 [FFmpeg-devel] [PATCH 0/3] V2: VAAPI: Add high bit depth encode/decode support Philip Langdale 2022-08-14 21:33 ` [FFmpeg-devel] [PATCH 1/3] lavu/pixfmt: Add Y216, Y410, and Y416 formats Philip Langdale 2022-08-15 6:12 ` Xiang, Haihao 2022-08-15 17:42 ` Philip Langdale 2022-08-15 23:06 ` Philip Langdale 2022-08-14 21:33 ` Philip Langdale [this message] 2022-08-15 22:10 ` [FFmpeg-devel] [PATCH 2/3] lavc/vaapi: Add support for remaining 10/12bit profiles Michael Niedermayer 2022-08-15 22:23 ` Philip Langdale 2022-08-16 17:29 ` Michael Niedermayer 2022-08-16 19:52 ` Philip Langdale 2022-08-16 19:55 ` Philip Langdale 2022-08-17 14:34 ` Michael Niedermayer 2022-08-14 21:33 ` [FFmpeg-devel] [PATCH 3/3] lavu/hwcontext_[vaapi|vulkan]: support mapping VUYA and Y416 Philip Langdale 2022-08-16 4:36 [FFmpeg-devel] [PATCH 0/3] V3: VAAPI: Add high bit depth encode/decode support Philip Langdale 2022-08-16 4:36 ` [FFmpeg-devel] [PATCH 2/3] lavc/vaapi: Add support for remaining 10/12bit profiles Philip Langdale 2022-08-16 5:02 [FFmpeg-devel] [PATCH 0/3] V4: VAAPI: Add high bit depth encode/decode support Philip Langdale 2022-08-16 5:02 ` [FFmpeg-devel] [PATCH 2/3] lavc/vaapi: Add support for remaining 10/12bit profiles Philip Langdale 2022-08-26 2:17 [FFmpeg-devel] [PATCH 0/3] V5: VAAPI: Add high bit depth encode/decode support Philip Langdale 2022-08-26 2:17 ` [FFmpeg-devel] [PATCH 2/3] lavc/vaapi: Add support for remaining 10/12bit profiles Philip Langdale
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220814213313.37948-3-philipl@overt.org \ --to=philipl@overt.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git