From: Timo Rothenpieler <timo@rothenpieler.org> To: ffmpeg-devel@ffmpeg.org Cc: Timo Rothenpieler <timo@rothenpieler.org> Subject: [FFmpeg-devel] [PATCH 09/11] avutil/half2float: use native _Float16 if available Date: Wed, 10 Aug 2022 22:47:10 +0200 Message-ID: <20220810204712.3123-9-timo@rothenpieler.org> (raw) In-Reply-To: <20220810204712.3123-1-timo@rothenpieler.org> _Float16 support was available on arm/aarch64 for a while, and with gcc 12 was enabled on x86 as long as SSE2 is supported. If the target arch supports f16c, gcc emits fairly efficient assembly, taking advantage of it. This is the case on x86-64-v3 or higher. Without f16c, it emulates it in software using sse2 instructions. --- configure | 4 ++++ libavutil/float2half.c | 2 ++ libavutil/float2half.h | 16 ++++++++++++++++ libavutil/half2float.c | 4 ++++ libavutil/half2float.h | 16 ++++++++++++++++ 5 files changed, 42 insertions(+) diff --git a/configure b/configure index 6761d0cb32..2536ae012d 100755 --- a/configure +++ b/configure @@ -2143,6 +2143,7 @@ ARCH_FEATURES=" fast_64bit fast_clz fast_cmov + float16 local_aligned simd_align_16 simd_align_32 @@ -5125,6 +5126,8 @@ elif enabled arm; then ;; esac + test_cflags -mfp16-format=ieee && add_cflags -mfp16-format=ieee + elif enabled avr32; then case $cpu in @@ -6228,6 +6231,7 @@ check_builtin MemoryBarrier windows.h "MemoryBarrier()" check_builtin sync_val_compare_and_swap "" "int *ptr; int oldval, newval; __sync_val_compare_and_swap(ptr, oldval, newval)" check_builtin gmtime_r time.h "time_t *time; struct tm *tm; gmtime_r(time, tm)" check_builtin localtime_r time.h "time_t *time; struct tm *tm; localtime_r(time, tm)" +check_builtin float16 "" "_Float16 f16var" case "$custom_allocator" in jemalloc) diff --git a/libavutil/float2half.c b/libavutil/float2half.c index dba14cef5d..1390d3acc0 100644 --- a/libavutil/float2half.c +++ b/libavutil/float2half.c @@ -20,6 +20,7 @@ void ff_init_float2half_tables(float2half_tables *t) { +#if !HAVE_FLOAT16 for (int i = 0; i < 256; i++) { int e = i - 127; @@ -50,4 +51,5 @@ void ff_init_float2half_tables(float2half_tables *t) t->shifttable[i|0x100] = 13; } } +#endif } diff --git a/libavutil/float2half.h b/libavutil/float2half.h index b8c9cdfc4f..8c1fb804b7 100644 --- a/libavutil/float2half.h +++ b/libavutil/float2half.h @@ -20,21 +20,37 @@ #define AVUTIL_FLOAT2HALF_H #include <stdint.h> +#include "intfloat.h" + +#include "config.h" typedef struct float2half_tables { +#if HAVE_FLOAT16 + uint8_t dummy; +#else uint16_t basetable[512]; uint8_t shifttable[512]; +#endif } float2half_tables; void ff_init_float2half_tables(float2half_tables *t); static inline uint16_t float2half(uint32_t f, const float2half_tables *t) { +#if HAVE_FLOAT16 + union { + _Float16 f; + uint16_t i; + } u; + u.f = av_int2float(f); + return u.i; +#else uint16_t h; h = t->basetable[(f >> 23) & 0x1ff] + ((f & 0x007fffff) >> t->shifttable[(f >> 23) & 0x1ff]); return h; +#endif } #endif /* AVUTIL_FLOAT2HALF_H */ diff --git a/libavutil/half2float.c b/libavutil/half2float.c index baac8e4093..873226d3a0 100644 --- a/libavutil/half2float.c +++ b/libavutil/half2float.c @@ -18,6 +18,7 @@ #include "libavutil/half2float.h" +#if !HAVE_FLOAT16 static uint32_t convertmantissa(uint32_t i) { int32_t m = i << 13; // Zero pad mantissa bits @@ -33,9 +34,11 @@ static uint32_t convertmantissa(uint32_t i) return m | e; // Return combined number } +#endif void ff_init_half2float_tables(half2float_tables *t) { +#if !HAVE_FLOAT16 t->mantissatable[0] = 0; for (int i = 1; i < 1024; i++) t->mantissatable[i] = convertmantissa(i); @@ -60,4 +63,5 @@ void ff_init_half2float_tables(half2float_tables *t) t->offsettable[31] = 2048; t->offsettable[32] = 0; t->offsettable[63] = 2048; +#endif } diff --git a/libavutil/half2float.h b/libavutil/half2float.h index cb58e44a1c..b2a7c934a6 100644 --- a/libavutil/half2float.h +++ b/libavutil/half2float.h @@ -20,22 +20,38 @@ #define AVUTIL_HALF2FLOAT_H #include <stdint.h> +#include "intfloat.h" + +#include "config.h" typedef struct half2float_tables { +#if HAVE_FLOAT16 + uint8_t dummy; +#else uint32_t mantissatable[3072]; uint32_t exponenttable[64]; uint16_t offsettable[64]; +#endif } half2float_tables; void ff_init_half2float_tables(half2float_tables *t); static inline uint32_t half2float(uint16_t h, const half2float_tables *t) { +#if HAVE_FLOAT16 + union { + _Float16 f; + uint16_t i; + } u; + u.i = h; + return av_float2int(u.f); +#else uint32_t f; f = t->mantissatable[t->offsettable[h >> 10] + (h & 0x3ff)] + t->exponenttable[h >> 10]; return f; +#endif } #endif /* AVUTIL_HALF2FLOAT_H */ -- 2.34.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-10 20:48 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-10 20:47 [FFmpeg-devel] [PATCH 01/11] lavu/pixfmt: add packed RGBA float16 format Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 02/11] avutil/hwcontext_d3d11va: add support for rgbaf16 pixel format Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 03/11] avfilter/vsrc_ddagrab: add rgbaf16 output support Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 04/11] avfilter/vsrc_ddagrab: add options for more control over output format fallback Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 05/11] avutil: move half-precision float helper to avutil Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 06/11] avutil/half2float: adjust conversion of NaN Timo Rothenpieler 2022-08-10 21:24 ` Andreas Rheinhardt 2022-08-10 21:36 ` Timo Rothenpieler 2022-08-10 21:43 ` Andreas Rheinhardt 2022-08-10 21:53 ` Timo Rothenpieler 2022-08-10 22:14 ` Mark Reid 2022-08-10 22:18 ` James Almer 2022-08-10 22:28 ` Timo Rothenpieler 2022-08-10 22:37 ` Mark Reid 2022-08-10 22:55 ` Timo Rothenpieler 2022-08-11 2:18 ` Mark Reid 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 07/11] avutil/half2float: move tables to header-internal structs Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 08/11] avutil/half2float: move non-inline init code out of header Timo Rothenpieler 2022-08-11 20:46 ` Michael Niedermayer 2022-08-11 20:50 ` Andreas Rheinhardt 2022-08-11 21:16 ` Michael Niedermayer 2022-08-11 21:31 ` Andreas Rheinhardt 2022-08-14 19:32 ` Michael Niedermayer 2022-08-15 4:20 ` Andreas Rheinhardt 2022-08-15 18:09 ` Michael Niedermayer 2022-08-14 21:54 ` Timo Rothenpieler 2022-08-10 20:47 ` Timo Rothenpieler [this message] 2022-08-10 21:03 ` [FFmpeg-devel] [PATCH 09/11] avutil/half2float: use native _Float16 if available Andreas Rheinhardt 2022-08-10 21:58 ` Timo Rothenpieler 2022-08-10 22:02 ` James Almer 2022-08-10 22:51 ` [FFmpeg-devel] [PATCH v2 " Timo Rothenpieler 2022-08-11 0:14 ` James Almer 2022-08-11 11:50 ` Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 10/11] swscale: add SwsContext parameter to input functions Timo Rothenpieler 2022-08-10 20:52 ` Timo Rothenpieler 2022-08-10 21:55 ` Andreas Rheinhardt 2022-08-10 22:02 ` Timo Rothenpieler 2022-08-10 20:47 ` [FFmpeg-devel] [PATCH 11/11] swscale/input: add rgbaf16 input support Timo Rothenpieler 2022-08-10 21:37 ` Timo Rothenpieler
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220810204712.3123-9-timo@rothenpieler.org \ --to=timo@rothenpieler.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git