From: Niklas Haas <ffmpeg@haasn.xyz> To: ffmpeg-devel@ffmpeg.org Cc: Niklas Haas <git@haasn.dev> Subject: [FFmpeg-devel] [PATCH v4 4/7] avcodec: add common fflcms2 boilerplate Date: Thu, 28 Jul 2022 16:49:59 +0200 Message-ID: <20220728145002.102600-5-ffmpeg@haasn.xyz> (raw) In-Reply-To: <20220728145002.102600-1-ffmpeg@haasn.xyz> From: Niklas Haas <git@haasn.dev> Handling this in general code makes more sense than handling it in individual codec files, because it would be a lot of unnecessary code duplication for the plenty of formats that support exporting ICC profiles (jpg, png, tiff, webp, jxl, ...). encode.c and decode.c will be in charge of initializing this state as needed, so we merely need to make sure to uninit it afterwards from the common destructor path. Signed-off-by: Niklas Haas <git@haasn.dev> --- configure | 2 +- libavcodec/Makefile | 1 + libavcodec/avcodec.c | 4 ++++ libavcodec/decode.c | 4 ++++ libavcodec/internal.h | 8 ++++++++ 5 files changed, 18 insertions(+), 1 deletion(-) diff --git a/configure b/configure index 6629d14099..8c7e8c9d1d 100755 --- a/configure +++ b/configure @@ -3814,7 +3814,7 @@ swresample_suggest="libm libsoxr stdatomic" swscale_deps="avutil" swscale_suggest="libm stdatomic" -avcodec_extralibs="pthreads_extralibs iconv_extralibs dxva2_extralibs" +avcodec_extralibs="pthreads_extralibs iconv_extralibs dxva2_extralibs lcms2_extralibs" avfilter_extralibs="pthreads_extralibs" avutil_extralibs="d3d11va_extralibs nanosleep_extralibs pthreads_extralibs vaapi_drm_extralibs vaapi_x11_extralibs vdpau_x11_extralibs" diff --git a/libavcodec/Makefile b/libavcodec/Makefile index 6751b6b591..aff7752856 100644 --- a/libavcodec/Makefile +++ b/libavcodec/Makefile @@ -114,6 +114,7 @@ OBJS-$(CONFIG_INTRAX8) += intrax8.o intrax8dsp.o msmpeg4data.o OBJS-$(CONFIG_IVIDSP) += ivi_dsp.o OBJS-$(CONFIG_JNI) += ffjni.o jni.o OBJS-$(CONFIG_JPEGTABLES) += jpegtables.o +OBJS-$(CONFIG_LCMS2) += fflcms2.o OBJS-$(CONFIG_LLAUDDSP) += lossless_audiodsp.o OBJS-$(CONFIG_LLVIDDSP) += lossless_videodsp.o OBJS-$(CONFIG_LLVIDENCDSP) += lossless_videoencdsp.o diff --git a/libavcodec/avcodec.c b/libavcodec/avcodec.c index 4bc18183a9..c9105c5df2 100644 --- a/libavcodec/avcodec.c +++ b/libavcodec/avcodec.c @@ -479,6 +479,10 @@ av_cold int avcodec_close(AVCodecContext *avctx) av_channel_layout_uninit(&avci->initial_ch_layout); +#if CONFIG_LCMS2 + ff_icc_context_uninit(&avci->icc); +#endif + av_freep(&avctx->internal); } diff --git a/libavcodec/decode.c b/libavcodec/decode.c index 0613681f89..8922222271 100644 --- a/libavcodec/decode.c +++ b/libavcodec/decode.c @@ -49,6 +49,10 @@ #include "internal.h" #include "thread.h" +#if CONFIG_LCMS2 +# include "fflcms2.h" +#endif + static int apply_param_change(AVCodecContext *avctx, const AVPacket *avpkt) { int ret; diff --git a/libavcodec/internal.h b/libavcodec/internal.h index 6fb4e1b9af..8809a7079a 100644 --- a/libavcodec/internal.h +++ b/libavcodec/internal.h @@ -33,6 +33,10 @@ #include "avcodec.h" #include "config.h" +#if CONFIG_LCMS2 +# include "fflcms2.h" +#endif + #define FF_SANE_NB_CHANNELS 512U #if HAVE_SIMD_ALIGN_64 @@ -146,6 +150,10 @@ typedef struct AVCodecInternal { uint64_t initial_channel_layout; #endif AVChannelLayout initial_ch_layout; + +#if CONFIG_LCMS2 + FFIccContext icc; /* used to read and write embedded ICC profiles */ +#endif } AVCodecInternal; /** -- 2.37.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-07-28 14:51 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-28 14:49 [FFmpeg-devel] [PATCH v4 0/7] ICC profile support in avcodec Niklas Haas 2022-07-28 14:49 ` [FFmpeg-devel] [PATCH v4 1/7] fflcms2: move to libavcodec Niklas Haas 2022-07-28 14:49 ` [FFmpeg-devel] [PATCH v4 2/7] avcodec/codec_internal: add cap for ICC profile support Niklas Haas 2022-07-28 14:49 ` [FFmpeg-devel] [PATCH v4 3/7] avcodec: add API for automatic handling of icc profiles Niklas Haas 2022-07-28 14:49 ` Niklas Haas [this message] 2022-07-28 14:50 ` [FFmpeg-devel] [PATCH v4 5/7] avcodec/decode: parse ICC profiles Niklas Haas 2022-07-28 14:50 ` [FFmpeg-devel] [PATCH v4 6/7] avcodec/encode:: generate " Niklas Haas 2022-07-28 14:50 ` [FFmpeg-devel] [PATCH v4 7/7] fate/png: add test for ICC profile parsing Niklas Haas 2022-07-30 9:59 ` [FFmpeg-devel] [PATCH v4 0/7] ICC profile support in avcodec Niklas Haas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220728145002.102600-5-ffmpeg@haasn.xyz \ --to=ffmpeg@haasn.xyz \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=git@haasn.dev \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git