From: Gyan Doshi <ffmpeg@gyani.pro> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH v4] ffmpeg: add option -isync Date: Thu, 14 Jul 2022 13:46:13 +0530 Message-ID: <20220714081613.173-1-ffmpeg@gyani.pro> (raw) This is a per-file input option that adjusts an input's timestamps with reference to another input, so that emitted packet timestamps account for the difference between the start times of the two inputs. Typical use case is to sync two or more live inputs such as from capture devices. Both the target and reference input source timestamps should be based on the same clock source. If either input lacks starting timestamps, then no sync adjustment is made. --- v4 change: fallback on reception timestamp removed. doc/ffmpeg.texi | 15 +++++++++++ fftools/ffmpeg.h | 2 ++ fftools/ffmpeg_opt.c | 60 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 77 insertions(+) diff --git a/doc/ffmpeg.texi b/doc/ffmpeg.texi index 1a534ff1cc..767df69b7f 100644 --- a/doc/ffmpeg.texi +++ b/doc/ffmpeg.texi @@ -518,6 +518,21 @@ see @ref{time duration syntax,,the Time duration section in the ffmpeg-utils(1) Like the @code{-ss} option but relative to the "end of file". That is negative values are earlier in the file, 0 is at EOF. +@item -isync @var{input_index} (@emph{input}) +Assign an input as a sync source. + +This will take the difference between the start times of the target and reference inputs and +offset the timestamps of the target file by that difference. The source timestamps of the two +inputs should derive from the same clock source for expected results. If @code{copyts} is set +then @code{start_at_zero} must also be set. If either of the inputs has no starting timestamp +then no sync adjustment is made. + +Acceptable values are those that refer to a valid ffmpeg input index. If the sync reference is +the target index itself or @var{-1}, then no adjustment is made to target timestamps. A sync +reference may not itself be synced to any other input. + +Default value is @var{-1}. + @item -itsoffset @var{offset} (@emph{input}) Set the input time offset. diff --git a/fftools/ffmpeg.h b/fftools/ffmpeg.h index 99d31c346e..391a35cf50 100644 --- a/fftools/ffmpeg.h +++ b/fftools/ffmpeg.h @@ -118,6 +118,7 @@ typedef struct OptionsContext { float readrate; int accurate_seek; int thread_queue_size; + int input_sync_ref; SpecifierOpt *ts_scale; int nb_ts_scale; @@ -410,6 +411,7 @@ typedef struct InputFile { at the moment when looping happens */ AVRational time_base; /* time base of the duration */ int64_t input_ts_offset; + int input_sync_ref; int64_t ts_offset; int64_t last_ts; diff --git a/fftools/ffmpeg_opt.c b/fftools/ffmpeg_opt.c index e08455478f..359d8f60b8 100644 --- a/fftools/ffmpeg_opt.c +++ b/fftools/ffmpeg_opt.c @@ -235,6 +235,7 @@ static void init_options(OptionsContext *o) o->chapters_input_file = INT_MAX; o->accurate_seek = 1; o->thread_queue_size = -1; + o->input_sync_ref = -1; } static int show_hwaccels(void *optctx, const char *opt, const char *arg) @@ -287,6 +288,59 @@ static int parse_and_set_vsync(const char *arg, int *vsync_var, int file_idx, in return 0; } +static int apply_sync_offsets(void) +{ + for (int i = 0; i < nb_input_files; i++) { + InputFile *ref, *self = input_files[i]; + int64_t adjustment; + int64_t self_start_time, ref_start_time, self_seek_start, ref_seek_start; + int start_times_set = 1; + + if (self->input_sync_ref == -1 || self->input_sync_ref == i) continue; + if (self->input_sync_ref >= nb_input_files || self->input_sync_ref < -1) { + av_log(NULL, AV_LOG_FATAL, "-isync for input %d references non-existent input %d.\n", i, self->input_sync_ref); + exit_program(1); + } + + if (copy_ts && !start_at_zero) { + av_log(NULL, AV_LOG_FATAL, "Use of -isync requires that start_at_zero be set if copyts is set.\n"); + exit_program(1); + } + + ref = input_files[self->input_sync_ref]; + if (ref->input_sync_ref != -1 && ref->input_sync_ref != self->input_sync_ref) { + av_log(NULL, AV_LOG_ERROR, "-isync for input %d references a resynced input %d. Sync not set.\n", i, self->input_sync_ref); + continue; + } + + if (self->ctx->start_time_realtime != AV_NOPTS_VALUE && ref->ctx->start_time_realtime != AV_NOPTS_VALUE) { + self_start_time = self->ctx->start_time_realtime; + ref_start_time = ref->ctx->start_time_realtime; + } else if (self->ctx->start_time != AV_NOPTS_VALUE && ref->ctx->start_time != AV_NOPTS_VALUE) { + self_start_time = self->ctx->start_time; + ref_start_time = ref->ctx->start_time; + } else { + start_times_set = 0; + } + + if (start_times_set) { + self_seek_start = self->start_time == AV_NOPTS_VALUE ? 0 : self->start_time; + ref_seek_start = ref->start_time == AV_NOPTS_VALUE ? 0 : ref->start_time; + + adjustment = (self_start_time - ref_start_time) + !copy_ts*(self_seek_start - ref_seek_start) + ref->input_ts_offset; + + self->ts_offset += adjustment; + + av_log(NULL, AV_LOG_INFO, "Adjusted ts offset for Input #%d by %"PRId64" us to sync with Input #%d.\n", i, adjustment, self->input_sync_ref); + } else { + av_log(NULL, AV_LOG_INFO, "Unable to identify start times for Inputs #%d and %d both. No sync adjustment made.\n", + i, self->input_sync_ref); + } + } + + return 0; +} + static int opt_filter_threads(void *optctx, const char *opt, const char *arg) { av_free(filter_nbthreads); @@ -1305,6 +1359,7 @@ static int open_input_file(OptionsContext *o, const char *filename) f->ist_index = nb_input_streams - ic->nb_streams; f->start_time = o->start_time; f->recording_time = o->recording_time; + f->input_sync_ref = o->input_sync_ref; f->input_ts_offset = o->input_ts_offset; f->ts_offset = o->input_ts_offset - (copy_ts ? (start_at_zero && ic->start_time != AV_NOPTS_VALUE ? ic->start_time : 0) : timestamp); f->nb_streams = ic->nb_streams; @@ -3489,6 +3544,8 @@ int ffmpeg_parse_options(int argc, char **argv) goto fail; } + apply_sync_offsets(); + /* create the complex filtergraphs */ ret = init_complex_filters(); if (ret < 0) { @@ -3603,6 +3660,9 @@ const OptionDef options[] = { { "accurate_seek", OPT_BOOL | OPT_OFFSET | OPT_EXPERT | OPT_INPUT, { .off = OFFSET(accurate_seek) }, "enable/disable accurate seeking with -ss" }, + { "isync", HAS_ARG | OPT_INT | OPT_OFFSET | + OPT_EXPERT | OPT_INPUT, { .off = OFFSET(input_sync_ref) }, + "Indicate the input index for sync reference", "sync ref" }, { "itsoffset", HAS_ARG | OPT_TIME | OPT_OFFSET | OPT_EXPERT | OPT_INPUT, { .off = OFFSET(input_ts_offset) }, "set the input ts offset", "time_off" }, -- 2.36.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-07-14 8:16 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-14 8:16 Gyan Doshi [this message] 2022-07-14 10:21 ` Gyan Doshi 2022-07-14 10:31 ` Paul B Mahol 2022-07-14 10:35 ` Gyan Doshi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220714081613.173-1-ffmpeg@gyani.pro \ --to=ffmpeg@gyani.pro \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git