From: Michael Niedermayer <michael@niedermayer.cc> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH 2/2] avcodec/libopusdec: Enable FEC/PLC Date: Fri, 17 Jun 2022 18:21:50 +0200 Message-ID: <20220617162150.GW396728@pb2> (raw) In-Reply-To: <20220316140045.369016-3-philip-dylan.gleonec@savoirfairelinux.com> [-- Attachment #1.1: Type: text/plain, Size: 4240 bytes --] On Wed, Mar 16, 2022 at 03:00:45PM +0100, Philip-Dylan Gleonec wrote: > Adds FEC/PLC support to libopus. The lost packets are detected as a > discontinuity in the audio stream. When a discontinuity is used, this > patch tries to decode the FEC data. If FEC data is present in the > packet, it is decoded, otherwise audio is re-created through PLC. > > This patch is based on Steinar H. Gunderson contribution, and corrects > the pts computation: all pts are expressed in samples instead of time. > This patch also adds an option "decode_fec" which enables or disables > FEC decoding. This option is disabled by default to keep consistent > behaviour with former versions. > > A number of checks are made to ensure compatibility with different > containers. Indeed, video containers seem to have a pts expressed in ms > while it is expressed in samples for audio containers. It also manages > the cases where pkt->duration is 0, in some RTP streams. This patch > ignores data it can not reconstruct, i.e. packets received twice and > packets with a length that is not a multiple of 2.5ms. > > Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com> > Co-developed-by: Steinar H. Gunderson <steinar+ffmpeg@gunderson.no> > --- > libavcodec/libopusdec.c | 105 +++++++++++++++++++++++++++++++++++----- > 1 file changed, 94 insertions(+), 11 deletions(-) > > diff --git a/libavcodec/libopusdec.c b/libavcodec/libopusdec.c > index 86ef715205..66134300d2 100644 > --- a/libavcodec/libopusdec.c > +++ b/libavcodec/libopusdec.c > @@ -43,10 +43,15 @@ struct libopus_context { > #ifdef OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST > int apply_phase_inv; > #endif > + int decode_fec; > + int64_t expected_next_pts; > }; > > #define OPUS_HEAD_SIZE 19 > > +// Sample rate is constant as libopus always output at 48kHz > +const AVRational opus_timebase = { 1, 48000 }; static const > + > static av_cold int libopus_decode_init(AVCodecContext *avc) > { > struct libopus_context *opus = avc->priv_data; > @@ -134,6 +139,8 @@ static av_cold int libopus_decode_init(AVCodecContext *avc) > /* Decoder delay (in samples) at 48kHz */ > avc->delay = avc->internal->skip_samples = opus->pre_skip; > > + opus->expected_next_pts = AV_NOPTS_VALUE; > + > return 0; > } > > @@ -155,25 +162,100 @@ static int libopus_decode(AVCodecContext *avc, void *data, > { > struct libopus_context *opus = avc->priv_data; > AVFrame *frame = data; > - int ret, nb_samples; > + uint8_t *outptr; > + int ret, nb_samples = 0, nb_lost_samples = 0, nb_samples_left; > + > + // If FEC is enabled, calculate number of lost samples > + if (opus->decode_fec && > + opus->expected_next_pts != AV_NOPTS_VALUE && > + pkt->pts != AV_NOPTS_VALUE && > + pkt->pts != opus->expected_next_pts) { > + // Cap at recovering 120 ms of lost audio. > + nb_lost_samples = pkt->pts - opus->expected_next_pts; > + nb_lost_samples = FFMIN(nb_lost_samples, MAX_FRAME_SIZE); > + // pts is expressed in ms for some containers (e.g. mkv) > + // FEC only works for SILK frames (> 10ms) > + // Detect if nb_lost_samples is in ms, and convert in samples if it is > + if (nb_lost_samples > 0) { > + if (avc->pkt_timebase.den != 48000) { > + nb_lost_samples = av_rescale_q(nb_lost_samples, avc->pkt_timebase, opus_timebase); > + } > + // For FEC/PLC, frame_size has to be to have a multiple of 2.5 ms > + if (nb_lost_samples % (int)(2.5 / 1000 * opus_timebase.den)) { > + nb_lost_samples -= nb_lost_samples % (int)(2.5 / 1000 * opus_timebase.den); something like this nb_lost_samples % (5LL * opus_timebase.den / 2000) would avoid the float also if noone reacts to your patch keep pinging it thx [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Into a blind darkness they enter who follow after the Ignorance, they as if into a greater darkness enter who devote themselves to the Knowledge alone. -- Isha Upanishad [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 195 bytes --] [-- Attachment #2: Type: text/plain, Size: 251 bytes --] _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-06-17 16:22 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <1179126120.329661.1613560269226.JavaMail.zimbra@savoirfairelinux.com> [not found] ` <780b5984-3673-4b74-8883-63b980a43cc1@gmail.com> [not found] ` <0f24eb6c-375e-fc19-dc03-8b759d601f7a@savoirfairelinux.com> [not found] ` <20210218163835.142726-1-philip-dylan.gleonec@savoirfairelinux.com> [not found] ` <CAN8HRDm8VeaKFpWkpqGWadFtzVOGeNE3K8TJEvKMbu3YYi5cvA@mail.gmail.com> 2022-03-16 14:00 ` [FFmpeg-devel] libopusdec: " Philip-Dylan Gleonec 2022-03-16 14:00 ` [FFmpeg-devel] [PATCH 1/2] avcodec/libopusenc: reload packet loss at encode Philip-Dylan Gleonec 2022-03-16 14:00 ` [FFmpeg-devel] [PATCH 2/2] avcodec/libopusdec: Enable FEC/PLC Philip-Dylan Gleonec 2022-06-16 16:05 ` Philip-Dylan Gleonec 2022-06-17 16:21 ` Michael Niedermayer [this message] 2022-07-04 14:13 ` Philip-Dylan Gleonec 2022-07-04 14:13 ` [FFmpeg-devel] [PATCH v2 1/2] avcodec/libopusenc: reload packet loss at encode Philip-Dylan Gleonec 2022-07-04 14:13 ` [FFmpeg-devel] [PATCH v2 2/2] avcodec/libopusdec: Enable FEC/PLC Philip-Dylan Gleonec 2022-07-06 21:50 ` Lynne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220617162150.GW396728@pb2 \ --to=michael@niedermayer.cc \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git