From: Anton Khirnov <anton@khirnov.net> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH 14/35] fftools/ffmpeg: move output file opts into private context Date: Thu, 16 Jun 2022 21:55:13 +0200 Message-ID: <20220616195534.5278-14-anton@khirnov.net> (raw) In-Reply-To: <20220616195534.5278-1-anton@khirnov.net> It is private to the muxer, no reason to access it from outside. --- fftools/ffmpeg.h | 3 +-- fftools/ffmpeg_mux.c | 9 ++++++--- fftools/ffmpeg_opt.c | 12 ++++++------ 3 files changed, 13 insertions(+), 11 deletions(-) diff --git a/fftools/ffmpeg.h b/fftools/ffmpeg.h index c7db12a640..2aa220da29 100644 --- a/fftools/ffmpeg.h +++ b/fftools/ffmpeg.h @@ -582,7 +582,6 @@ typedef struct OutputFile { const AVOutputFormat *format; AVFormatContext *ctx; - AVDictionary *opts; int ost_index; /* index of the first stream in output_streams */ int64_t recording_time; ///< desired length of the resulting file in microseconds == AV_TIME_BASE units int64_t start_time; ///< start time in microseconds == AV_TIME_BASE units @@ -686,7 +685,7 @@ int hw_device_setup_for_filter(FilterGraph *fg); int hwaccel_decode_init(AVCodecContext *avctx); -int of_muxer_init(OutputFile *of, int64_t limit_filesize); +int of_muxer_init(OutputFile *of, AVDictionary *opts, int64_t limit_filesize); /* open the muxer when all the streams are initialized */ int of_check_init(OutputFile *of); int of_write_trailer(OutputFile *of); diff --git a/fftools/ffmpeg_mux.c b/fftools/ffmpeg_mux.c index ed091a3d2d..0fd7888d4f 100644 --- a/fftools/ffmpeg_mux.c +++ b/fftools/ffmpeg_mux.c @@ -46,6 +46,8 @@ typedef struct MuxStream { struct Muxer { MuxStream *streams; + AVDictionary *opts; + /* filesize limit expressed in bytes */ int64_t limit_filesize; int64_t final_filesize; @@ -281,7 +283,7 @@ int of_check_init(OutputFile *of) return 0; } - ret = avformat_write_header(of->ctx, &of->opts); + ret = avformat_write_header(of->ctx, &of->mux->opts); if (ret < 0) { av_log(NULL, AV_LOG_ERROR, "Could not write header for output file #%d " @@ -374,6 +376,7 @@ static void mux_free(Muxer **pmux, int nb_streams) av_fifo_freep2(&ms->muxing_queue); } av_freep(&mux->streams); + av_dict_free(&mux->opts); av_freep(pmux); } @@ -393,12 +396,11 @@ void of_close(OutputFile **pof) if (s && s->oformat && !(s->oformat->flags & AVFMT_NOFILE)) avio_closep(&s->pb); avformat_free_context(s); - av_dict_free(&of->opts); av_freep(pof); } -int of_muxer_init(OutputFile *of, int64_t limit_filesize) +int of_muxer_init(OutputFile *of, AVDictionary *opts, int64_t limit_filesize) { Muxer *mux = av_mallocz(sizeof(*mux)); int ret = 0; @@ -424,6 +426,7 @@ int of_muxer_init(OutputFile *of, int64_t limit_filesize) } mux->limit_filesize = limit_filesize; + mux->opts = opts; if (strcmp(of->format->name, "rtp")) want_sdp = 0; diff --git a/fftools/ffmpeg_opt.c b/fftools/ffmpeg_opt.c index 4d4939c6fd..1bcb7a3006 100644 --- a/fftools/ffmpeg_opt.c +++ b/fftools/ffmpeg_opt.c @@ -2332,7 +2332,7 @@ static int open_output_file(OptionsContext *o, const char *filename) OutputFile *of; OutputStream *ost; InputStream *ist; - AVDictionary *unused_opts = NULL; + AVDictionary *unused_opts = NULL, *format_opts = NULL; const AVDictionaryEntry *e = NULL; if (o->stop_time != INT64_MAX && o->recording_time != INT64_MAX) { @@ -2357,7 +2357,7 @@ static int open_output_file(OptionsContext *o, const char *filename) of->recording_time = o->recording_time; of->start_time = o->start_time; of->shortest = o->shortest; - av_dict_copy(&of->opts, o->g->format_opts, 0); + av_dict_copy(&format_opts, o->g->format_opts, 0); if (!strcmp(filename, "-")) filename = "pipe:"; @@ -2379,7 +2379,7 @@ static int open_output_file(OptionsContext *o, const char *filename) oc->flags |= AVFMT_FLAG_BITEXACT; of->bitexact = 1; } else { - of->bitexact = check_opt_bitexact(oc, of->opts, "fflags", + of->bitexact = check_opt_bitexact(oc, format_opts, "fflags", AVFMT_FLAG_BITEXACT); } @@ -2760,7 +2760,7 @@ loop_end: /* open the file */ if ((err = avio_open2(&oc->pb, filename, AVIO_FLAG_WRITE, &oc->interrupt_callback, - &of->opts)) < 0) { + &format_opts)) < 0) { print_error(filename, err); exit_program(1); } @@ -2768,7 +2768,7 @@ loop_end: assert_file_overwrite(filename); if (o->mux_preload) { - av_dict_set_int(&of->opts, "preload", o->mux_preload*AV_TIME_BASE, 0); + av_dict_set_int(&format_opts, "preload", o->mux_preload*AV_TIME_BASE, 0); } oc->max_delay = (int)(o->mux_max_delay * AV_TIME_BASE); @@ -2962,7 +2962,7 @@ loop_end: exit_program(1); } - err = of_muxer_init(of, o->limit_filesize); + err = of_muxer_init(of, format_opts, o->limit_filesize); if (err < 0) { av_log(NULL, AV_LOG_FATAL, "Error initializing internal muxing state\n"); exit_program(1); -- 2.34.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-06-16 20:05 UTC|newest] Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-16 19:55 [FFmpeg-devel] [PATCH 01/35] fftools/ffmpeg_mux: add private muxer context Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 02/35] fftools/ffmpeg: add a helper function to access output file size Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 03/35] fftools/ffmpeg: fix the type of limit_filesize Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 04/35] fftools/ffmpeg: refactor limiting output file size with -fs Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 05/35] fftools/ffmpeg: set want_sdp when initializing the muxer Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 06/35] fftools/ffmpeg: write the header for stream-less outputs " Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 07/35] fftools/ffmpeg: move closing the file into of_write_trailer() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 08/35] fftools/ffmpeg: refactor the code checking for bitexact output Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 09/35] fftools/ffmpeg: access output file chapters through a wrapper Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 10/35] fftools/ffmpeg: do not log to the muxer context Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 11/35] fftools/ffmpeg: move the mux queue into muxer private data Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 12/35] fftools/ffmpeg_mux: split queuing packets into a separate function Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 13/35] fftools/ffmpeg_mux: split of_write_packet() Anton Khirnov 2022-06-16 19:55 ` Anton Khirnov [this message] 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 15/35] fftools/ffmpeg: move freeing 2pass input stats to a better place Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 16/35] fftools/ffmpeg: use refcounted packets for encoded subtitles Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 17/35] fftools/ffmpeg: do not send spurious EOF for streamcopy when looping Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 18/35] fate/ffmpeg: add a test for interleaving video+subs Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 19/35] fftools/ffmpeg: use last filter output pts to choose next output stream Anton Khirnov 2022-06-17 18:45 ` Michael Niedermayer 2022-06-23 15:32 ` [FFmpeg-devel] [PATCH] " Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 20/35] fftools/ffmpeg: use pre-BSF DTS for choosing next output Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 21/35] fftools: add an object pool Anton Khirnov 2022-06-16 21:41 ` Andreas Rheinhardt 2022-07-22 15:39 ` [FFmpeg-devel] [PATCH 22/35] " Anton Khirnov 2022-07-22 17:58 ` Andreas Rheinhardt 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 22/35] fftools/ffmpeg: rework -shortest implementation Anton Khirnov 2022-06-16 21:05 ` Andreas Rheinhardt 2022-06-17 10:25 ` Anton Khirnov 2022-06-23 10:04 ` [FFmpeg-devel] [PATCH] " Anton Khirnov 2022-07-13 10:50 ` Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 23/35] fftools/ffmpeg_mux: reindent Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 24/35] fftools/ffmpeg: use the sync queues to handle -frames Anton Khirnov 2022-06-16 20:33 ` Andreas Rheinhardt 2022-06-17 10:46 ` Anton Khirnov 2022-06-22 8:27 ` Andreas Rheinhardt 2022-06-22 17:26 ` Anton Khirnov 2022-06-23 22:12 ` Michael Niedermayer 2022-07-04 16:11 ` [FFmpeg-devel] [PATCH] " Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 25/35] fftools/ffmpeg: stop using OutputStream.frame_number in print_report() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 26/35] fftools/ffmpeg: only set OutputStream.frame_number for video encoding Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 27/35] fftools/ffmpeg: make the muxer AVFormatContext private to ffmpeg_mux.c Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 28/35] fftools/ffmpeg_mux: return errors from of_submit_packet() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 29/35] fftools/ffmpeg_mux: return errors from submit_packet() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 30/35] fftools/ffmpeg_mux: return errors from write_packet() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 31/35] fftools/ffmpeg_mux: do not call exit_program() in print_sdp() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 32/35] fftools/ffmpeg: stop using av_stream_get_end_pts() Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 33/35] fftools/ffmpeg: depend on threads Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 34/35] fftools: add a multistream thread-safe queue Anton Khirnov 2022-06-16 19:55 ` [FFmpeg-devel] [PATCH 35/35] fftools/ffmpeg: move each muxer to a separate thread Anton Khirnov 2022-06-17 10:27 ` [FFmpeg-devel] [PATCH 01/35] fftools/ffmpeg_mux: add private muxer context Anton Khirnov 2022-07-08 16:58 ` Michael Niedermayer 2022-07-13 10:58 ` Anton Khirnov 2022-07-13 22:12 ` Michael Niedermayer 2022-07-14 5:37 ` Anton Khirnov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220616195534.5278-14-anton@khirnov.net \ --to=anton@khirnov.net \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git