From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH v2] libavcodec/qsvenc: Add min/max QP control options for I/P/B frame Date: Wed, 25 May 2022 21:13:41 +0800 Message-ID: <20220525131341.3203743-1-wenbin.chen@intel.com> (raw) From: Yue Heng <yue.heng@intel.com> To do more accurate QP control, add min/max QP control on I/P/B frame separately to qsv encoder. qmax and qmin still work but newly-added options have higher priority. Signed-off-by: Yue Heng <yue.heng@intel.com> Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> --- doc/encoders.texi | 36 ++++++++++++++++++++++++++++++++++++ libavcodec/qsvenc.c | 21 +++++++++++++++++++-- libavcodec/qsvenc.h | 15 +++++++++++++++ libavcodec/qsvenc_h264.c | 1 + libavcodec/qsvenc_hevc.c | 1 + 5 files changed, 72 insertions(+), 2 deletions(-) diff --git a/doc/encoders.texi b/doc/encoders.texi index 9796a606fa..e9df36de8f 100644 --- a/doc/encoders.texi +++ b/doc/encoders.texi @@ -3472,6 +3472,24 @@ Multi-Frame Mode. @item @var{repeat_pps} Repeat pps for every frame. + +@item @var{max_qp_i} +Maximum video quantizer scale for I frame. + +@item @var{min_qp_i} +Minimum video quantizer scale for I frame. + +@item @var{max_qp_p} +Maximum video quantizer scale for P frame. + +@item @var{min_qp_p} +Minimum video quantizer scale for P frame. + +@item @var{max_qp_b} +Maximum video quantizer scale for B frame. + +@item @var{min_qp_b} +Minimum video quantizer scale for B frame. @end table @subsection HEVC Options @@ -3595,6 +3613,24 @@ range is [-63, 63] for 10 bit-depth or [-75, 75] for 12 bit-depth respectively. @item @var{int_ref_cycle_dist} Distance between the beginnings of the intra-refresh cycles in frames. + +@item @var{max_qp_i} +Maximum video quantizer scale for I frame. + +@item @var{min_qp_i} +Minimum video quantizer scale for I frame. + +@item @var{max_qp_p} +Maximum video quantizer scale for P frame. + +@item @var{min_qp_p} +Minimum video quantizer scale for P frame. + +@item @var{max_qp_b} +Maximum video quantizer scale for B frame. + +@item @var{min_qp_b} +Minimum video quantizer scale for B frame. @end table @subsection MPEG2 Options diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c index 2b3b06767d..03e9e5523d 100644 --- a/libavcodec/qsvenc.c +++ b/libavcodec/qsvenc.c @@ -828,8 +828,13 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) if (q->b_strategy >= 0) q->extco2.BRefType = q->b_strategy ? MFX_B_REF_PYRAMID : MFX_B_REF_OFF; - if (avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx->qmax) { - av_log(avctx, AV_LOG_ERROR, "qmin and or qmax are set but invalid, please make sure min <= max\n"); + if ((avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx->qmax) || + (q->max_qp_i >= 0 && q->min_qp_i >= 0 && q->min_qp_i > q->max_qp_i) || + (q->max_qp_p >= 0 && q->min_qp_p >= 0 && q->min_qp_p > q->max_qp_p) || + (q->max_qp_b >= 0 && q->min_qp_b >= 0 && q->min_qp_b > q->max_qp_b)) { + av_log(avctx, AV_LOG_ERROR, + "qmin and or qmax are set but invalid," + " please make sure min <= max\n"); return AVERROR(EINVAL); } if (avctx->qmin >= 0) { @@ -840,6 +845,18 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) q->extco2.MaxQPI = avctx->qmax > 51 ? 51 : avctx->qmax; q->extco2.MaxQPP = q->extco2.MaxQPB = q->extco2.MaxQPI; } + if (q->min_qp_i >= 0) + q->extco2.MinQPI = q->min_qp_i > 51 ? 51 : q->min_qp_i; + if (q->max_qp_i >= 0) + q->extco2.MaxQPI = q->max_qp_i > 51 ? 51 : q->max_qp_i; + if (q->min_qp_p >= 0) + q->extco2.MinQPP = q->min_qp_p > 51 ? 51 : q->min_qp_p; + if (q->max_qp_p >= 0) + q->extco2.MaxQPP = q->max_qp_p > 51 ? 51 : q->max_qp_p; + if (q->min_qp_b >= 0) + q->extco2.MinQPB = q->min_qp_b > 51 ? 51 : q->min_qp_b; + if (q->max_qp_b >= 0) + q->extco2.MaxQPB = q->max_qp_b > 51 ? 51 : q->max_qp_b; if (q->mbbrc >= 0) q->extco2.MBBRC = q->mbbrc ? MFX_CODINGOPTION_ON : MFX_CODINGOPTION_OFF; diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h index fec5e584db..b754ac4b56 100644 --- a/libavcodec/qsvenc.h +++ b/libavcodec/qsvenc.h @@ -100,6 +100,14 @@ #define QSV_OPTION_LOW_DELAY_BRC \ { "low_delay_brc", "Allow to strictly obey avg frame size", OFFSET(qsv.low_delay_brc), AV_OPT_TYPE_BOOL,{ .i64 = -1 }, -1, 1, VE }, +#define QSV_OPTION_MAX_MIN_QP \ +{ "max_qp_i", "Maximum video quantizer scale for I frame", OFFSET(qsv.max_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_i", "Minimum video quantizer scale for I frame", OFFSET(qsv.min_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "max_qp_p", "Maximum video quantizer scale for P frame", OFFSET(qsv.max_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_p", "Minimum video quantizer scale for P frame", OFFSET(qsv.min_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "max_qp_b", "Maximum video quantizer scale for B frame", OFFSET(qsv.max_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_b", "Minimum video quantizer scale for B frame", OFFSET(qsv.min_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, + extern const AVCodecHWConfigInternal *const ff_qsv_enc_hw_configs[]; typedef int SetEncodeCtrlCB (AVCodecContext *avctx, @@ -209,6 +217,13 @@ typedef struct QSVEncContext { int co3_idx; int exthevctiles_idx; int vp9_idx; + + int max_qp_i; + int min_qp_i; + int max_qp_p; + int min_qp_p; + int max_qp_b; + int min_qp_b; } QSVEncContext; int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q); diff --git a/libavcodec/qsvenc_h264.c b/libavcodec/qsvenc_h264.c index cf77ea575b..87b09360cb 100644 --- a/libavcodec/qsvenc_h264.c +++ b/libavcodec/qsvenc_h264.c @@ -114,6 +114,7 @@ static const AVOption options[] = { QSV_OPTION_B_STRATEGY QSV_OPTION_DBLK_IDC QSV_OPTION_LOW_DELAY_BRC + QSV_OPTION_MAX_MIN_QP { "cavlc", "Enable CAVLC", OFFSET(qsv.cavlc), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, #if QSV_HAVE_VCM diff --git a/libavcodec/qsvenc_hevc.c b/libavcodec/qsvenc_hevc.c index a6bf39c148..da2bf457af 100644 --- a/libavcodec/qsvenc_hevc.c +++ b/libavcodec/qsvenc_hevc.c @@ -233,6 +233,7 @@ static const AVOption options[] = { QSV_OPTION_B_STRATEGY QSV_OPTION_DBLK_IDC QSV_OPTION_LOW_DELAY_BRC + QSV_OPTION_MAX_MIN_QP { "idr_interval", "Distance (in I-frames) between IDR frames", OFFSET(qsv.idr_interval), AV_OPT_TYPE_INT, { .i64 = 0 }, -1, INT_MAX, VE, "idr_interval" }, { "begin_only", "Output an IDR-frame only at the beginning of the stream", 0, AV_OPT_TYPE_CONST, { .i64 = -1 }, 0, 0, VE, "idr_interval" }, -- 2.32.0 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-05-25 13:14 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-25 13:13 Wenbin Chen [this message] 2022-06-01 16:09 ` Xiang, Haihao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220525131341.3203743-1-wenbin.chen@intel.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git