From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH] libavcodec/qsvenc: Add min/max QP control options for I/P/B frame Date: Fri, 6 May 2022 10:19:56 +0800 Message-ID: <20220506021956.2277740-1-wenbin.chen@intel.com> (raw) From: Yue Heng <yue.heng@intel.com> To do more accurate QP control, add min/max QP control on I/P/B frame separately to qsv encoder. qmax and qmin still work but newly-added options have higher priority. Signed-off-by: Yue Heng <yue.heng@intel.com> Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> --- doc/encoders.texi | 18 ++++++++++++++++++ libavcodec/qsvenc.c | 21 +++++++++++++++++++-- libavcodec/qsvenc.h | 12 ++++++++++++ 3 files changed, 49 insertions(+), 2 deletions(-) diff --git a/doc/encoders.texi b/doc/encoders.texi index 966032a720..86bcdbc04b 100644 --- a/doc/encoders.texi +++ b/doc/encoders.texi @@ -3282,6 +3282,24 @@ Forcing I frames as IDR frames. @item @var{low_power} For encoders set this flag to ON to reduce power consumption and GPU usage. + +@item @var{max_qp_i} +Maximum video quantizer scale for I frame. + +@item @var{min_qp_i} +Minimum video quantizer scale for I frame. + +@item @var{max_qp_p} +Maximum video quantizer scale for P frame. + +@item @var{min_qp_p} +Minimum video quantizer scale for P frame. + +@item @var{max_qp_b} +Maximum video quantizer scale for B frame. + +@item @var{min_qp_b} +Minimum video quantizer scale for B frame. @end table @subsection H264 options diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c index fbb22ca436..a3e9bb4583 100644 --- a/libavcodec/qsvenc.c +++ b/libavcodec/qsvenc.c @@ -930,8 +930,13 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) q->extco2.BRefType = q->b_strategy ? MFX_B_REF_PYRAMID : MFX_B_REF_OFF; #endif #if QSV_VERSION_ATLEAST(1, 9) - if (avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx->qmax) { - av_log(avctx, AV_LOG_ERROR, "qmin and or qmax are set but invalid, please make sure min <= max\n"); + if ((avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx->qmax) || + (q->max_qp_i >= 0 && q->min_qp_i >= 0 && q->min_qp_i > q->max_qp_i) || + (q->max_qp_p >= 0 && q->min_qp_p >= 0 && q->min_qp_p > q->max_qp_p) || + (q->max_qp_b >= 0 && q->min_qp_b >= 0 && q->min_qp_b > q->max_qp_b)) { + av_log(avctx, AV_LOG_ERROR, + "qmin and or qmax are set but invalid," + " please make sure min <= max\n"); return AVERROR(EINVAL); } if (avctx->qmin >= 0) { @@ -942,6 +947,18 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q) q->extco2.MaxQPI = avctx->qmax > 51 ? 51 : avctx->qmax; q->extco2.MaxQPP = q->extco2.MaxQPB = q->extco2.MaxQPI; } + if (q->min_qp_i >= 0) + q->extco2.MinQPI = q->min_qp_i > 51 ? 51 : q->min_qp_i; + if (q->max_qp_i >= 0) + q->extco2.MaxQPI = q->max_qp_i > 51 ? 51 : q->max_qp_i; + if (q->min_qp_p >= 0) + q->extco2.MinQPP = q->min_qp_p > 51 ? 51 : q->min_qp_p; + if (q->max_qp_p >= 0) + q->extco2.MaxQPP = q->max_qp_p > 51 ? 51 : q->max_qp_p; + if (q->min_qp_b >= 0) + q->extco2.MinQPB = q->min_qp_b > 51 ? 51 : q->min_qp_b; + if (q->max_qp_b >= 0) + q->extco2.MaxQPB = q->max_qp_b > 51 ? 51 : q->max_qp_b; #endif if (q->mbbrc >= 0) q->extco2.MBBRC = q->mbbrc ? MFX_CODINGOPTION_ON : MFX_CODINGOPTION_OFF; diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h index cb84723dfa..ea05967db5 100644 --- a/libavcodec/qsvenc.h +++ b/libavcodec/qsvenc.h @@ -105,6 +105,12 @@ { "low_power", "enable low power mode(experimental: many limitations by mfx version, BRC modes, etc.)", OFFSET(qsv.low_power), AV_OPT_TYPE_BOOL, { .i64 = -1}, -1, 1, VE},\ { "dblk_idc", "This option disable deblocking. It has value in range 0~2.", OFFSET(qsv.dblk_idc), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 2, VE}, \ { "low_delay_brc", "Allow to strictly obey avg frame size", OFFSET(qsv.low_delay_brc), AV_OPT_TYPE_BOOL,{ .i64 = -1 }, -1, 1, VE }, \ +{ "max_qp_i", "Maximum video quantizer scale for I frame", OFFSET(qsv.max_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_i", "Minimum video quantizer scale for I frame", OFFSET(qsv.min_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "max_qp_p", "Maximum video quantizer scale for P frame", OFFSET(qsv.max_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_p", "Minimum video quantizer scale for P frame", OFFSET(qsv.min_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "max_qp_b", "Maximum video quantizer scale for B frame", OFFSET(qsv.max_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ +{ "min_qp_b", "Minimum video quantizer scale for B frame", OFFSET(qsv.min_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 51, VE}, \ extern const AVCodecHWConfigInternal *const ff_qsv_enc_hw_configs[]; @@ -218,6 +224,12 @@ typedef struct QSVEncContext { SetEncodeCtrlCB *set_encode_ctrl_cb; int forced_idr; int low_delay_brc; + int max_qp_i; + int min_qp_i; + int max_qp_p; + int min_qp_p; + int max_qp_b; + int min_qp_b; } QSVEncContext; int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q); -- 2.32.0 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-05-06 2:20 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-06 2:19 Wenbin Chen [this message] 2022-05-25 7:26 ` Xiang, Haihao 2022-05-25 12:44 ` Chen, Wenbin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220506021956.2277740-1-wenbin.chen@intel.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git