From: Fei Wang <fei.w.wang-at-intel.com@ffmpeg.org> To: ffmpeg-devel@ffmpeg.org Cc: Fei Wang <fei.w.wang@intel.com>, Linjie Fu <linjie.fu@intel.com> Subject: [FFmpeg-devel] [PATCH v7 1/2] lavc/vaapi_encode: add support for maxframesize Date: Thu, 5 May 2022 17:07:14 +0800 Message-ID: <20220505090715.2016246-1-fei.w.wang@intel.com> (raw) From: Linjie Fu <linjie.fu@intel.com> Add support for max frame size: - max_frame_size (bytes) to indicate the max allowed size for frame. Control each encoded frame size into target limitation size by adjusting whole frame's average QP value. The driver will use multi passes to adjust average QP setp by step to achieve the target, and the result may not strictly guaranteed. Frame size may exceed target alone with using the maximum average QP value. The failure always happens on the intra(especially the first intra frame of a new GOP) frames or set max_frame_size with a very small number. example cmdline: ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 -f rawvideo \ -v verbose -s:v 352x288 -i ./input.yuv -vf format=nv12,hwupload \ -c:v h264_vaapi -profile:v main -g 30 -rc_mode VBR -b:v 500k \ -bf 3 -max_frame_size 40000 -vframes 100 -y ./max_frame_size.h264 Max frame size was enabled since VA-API version (0, 33, 0), but query is available since (1, 5, 0). It will be passed as a parameter in picParam and should be set for each frame. Signed-off-by: Linjie Fu <linjie.fu@intel.com> Signed-off-by: Fei Wang <fei.w.wang@intel.com> --- update: 1. return error when fail to set max frame size. 2. refine commit and debug message. libavcodec/vaapi_encode.c | 74 +++++++++++++++++++++++++++++++++++++++ libavcodec/vaapi_encode.h | 10 +++++- 2 files changed, 83 insertions(+), 1 deletion(-) diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c index 0e2f5ed447..284ce29888 100644 --- a/libavcodec/vaapi_encode.c +++ b/libavcodec/vaapi_encode.c @@ -365,6 +365,17 @@ static int vaapi_encode_issue(AVCodecContext *avctx, goto fail; } +#if VA_CHECK_VERSION(1, 5, 0) + if (ctx->max_frame_size) { + err = vaapi_encode_make_misc_param_buffer(avctx, pic, + VAEncMiscParameterTypeMaxFrameSize, + &ctx->mfs_params, + sizeof(ctx->mfs_params)); + if (err < 0) + goto fail; + } +#endif + if (pic->type == PICTURE_TYPE_IDR) { if (ctx->va_packed_headers & VA_ENC_PACKED_HEADER_SEQUENCE && ctx->codec->write_sequence_header) { @@ -1869,6 +1880,63 @@ rc_mode_found: return 0; } +static av_cold int vaapi_encode_init_max_frame_size(AVCodecContext *avctx) +{ +#if VA_CHECK_VERSION(1, 5, 0) + VAAPIEncodeContext *ctx = avctx->priv_data; + VAConfigAttrib attr = { VAConfigAttribMaxFrameSize }; + VAStatus vas; + + if (ctx->va_rc_mode == VA_RC_CQP) { + ctx->max_frame_size = 0; + av_log(avctx, AV_LOG_ERROR, "Max frame size is invalid in CQP rate " + "control mode.\n"); + return AVERROR(EINVAL); + } + + vas = vaGetConfigAttributes(ctx->hwctx->display, + ctx->va_profile, + ctx->va_entrypoint, + &attr, 1); + if (vas != VA_STATUS_SUCCESS) { + ctx->max_frame_size = 0; + av_log(avctx, AV_LOG_ERROR, "Failed to query max frame size " + "config attribute: %d (%s).\n", vas, vaErrorStr(vas)); + return AVERROR_EXTERNAL; + } + + if (attr.value == VA_ATTRIB_NOT_SUPPORTED) { + ctx->max_frame_size = 0; + av_log(avctx, AV_LOG_ERROR, "Max frame size attribute " + "is not supported.\n"); + return AVERROR(EINVAL); + } else { + VAConfigAttribValMaxFrameSize attr_mfs; + attr_mfs.value = attr.value; + // Prefer to use VAEncMiscParameterTypeMaxFrameSize for max frame size. + if (!attr_mfs.bits.max_frame_size && attr_mfs.bits.multiple_pass) { + ctx->max_frame_size = 0; + av_log(avctx, AV_LOG_ERROR, "Driver only supports multiple pass " + "max frame size which has not been implemented in FFmpeg.\n"); + return AVERROR(EINVAL); + } + + ctx->mfs_params = (VAEncMiscParameterBufferMaxFrameSize){ + .max_frame_size = ctx->max_frame_size * 8, + }; + + av_log(avctx, AV_LOG_VERBOSE, "Set max frame size: %d bytes.\n", + ctx->max_frame_size); + } +#else + av_log(avctx, AV_LOG_ERROR, "The max frame size option is not supported with " + "this VAAPI version.\n"); + return AVERROR(EINVAL); +#endif + + return 0; +} + static av_cold int vaapi_encode_init_gop_structure(AVCodecContext *avctx) { VAAPIEncodeContext *ctx = avctx->priv_data; @@ -2548,6 +2616,12 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx) goto fail; } + if (ctx->max_frame_size) { + err = vaapi_encode_init_max_frame_size(avctx); + if (err < 0) + goto fail; + } + vas = vaCreateConfig(ctx->hwctx->display, ctx->va_profile, ctx->va_entrypoint, ctx->config_attributes, ctx->nb_config_attributes, diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h index af0588c30b..359f954fff 100644 --- a/libavcodec/vaapi_encode.h +++ b/libavcodec/vaapi_encode.h @@ -191,6 +191,9 @@ typedef struct VAAPIEncodeContext { // Desired B frame reference depth. int desired_b_depth; + // Max Frame Size + int max_frame_size; + // Explicitly set RC mode (otherwise attempt to pick from // available modes). int explicit_rc_mode; @@ -268,6 +271,7 @@ typedef struct VAAPIEncodeContext { VAEncMiscParameterRateControl rc_params; VAEncMiscParameterHRD hrd_params; VAEncMiscParameterFrameRate fr_params; + VAEncMiscParameterBufferMaxFrameSize mfs_params; #if VA_CHECK_VERSION(0, 36, 0) VAEncMiscParameterBufferQualityLevel quality_params; #endif @@ -478,7 +482,11 @@ int ff_vaapi_encode_close(AVCodecContext *avctx); "Increase this to improve single channel performance. This option " \ "doesn't work if driver doesn't implement vaSyncBuffer function.", \ OFFSET(common.async_depth), AV_OPT_TYPE_INT, \ - { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS } + { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS }, \ + { "max_frame_size", \ + "Maximum frame size (in bytes)",\ + OFFSET(common.max_frame_size), AV_OPT_TYPE_INT, \ + { .i64 = 0 }, 0, INT_MAX, FLAGS } #define VAAPI_ENCODE_RC_MODE(name, desc) \ { #name, desc, 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_ ## name }, \ -- 2.25.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-05-05 9:13 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-05 9:07 Fei Wang [this message] 2022-05-05 9:07 ` [FFmpeg-devel] [PATCH v7 2/2] doc/vaapi_encode: add documentations for max_frame_size Fei Wang 2022-05-23 2:14 ` [FFmpeg-devel] [PATCH v7 1/2] lavc/vaapi_encode: add support for maxframesize Wang, Fei W 2022-05-30 1:27 ` Xiang, Haihao 2022-06-06 6:16 ` Xiang, Haihao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220505090715.2016246-1-fei.w.wang@intel.com \ --to=fei.w.wang-at-intel.com@ffmpeg.org \ --cc=fei.w.wang@intel.com \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=linjie.fu@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git