From: James Almer <jamrial@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH 4/7] avformat/movenc: write channel descriptions when a known layout or a bitmap can't be used Date: Mon, 28 Mar 2022 20:24:50 -0300 Message-ID: <20220328232453.54773-4-jamrial@gmail.com> (raw) In-Reply-To: <20220328232453.54773-1-jamrial@gmail.com> Fixes part of ticket #2865 Signed-off-by: James Almer <jamrial@gmail.com> --- libavformat/mov_chan.c | 75 ++++++++++++++++++++++++++++++++---------- libavformat/mov_chan.h | 8 +++-- libavformat/movenc.c | 37 +++++++++++++++------ 3 files changed, 90 insertions(+), 30 deletions(-) diff --git a/libavformat/mov_chan.c b/libavformat/mov_chan.c index 3c23142f35..4cb373d1b9 100644 --- a/libavformat/mov_chan.c +++ b/libavformat/mov_chan.c @@ -504,9 +504,29 @@ static uint64_t mov_get_channel_mask(uint32_t label) return 0; } -uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, - const AVChannelLayout *ch_layout, - uint32_t *bitmap) +static uint32_t mov_get_channel_label(enum AVChannel channel) +{ + if (channel < 0) + return 0; + if (channel <= AV_CHAN_TOP_BACK_RIGHT) + return channel + 1; + if (channel == AV_CHAN_WIDE_LEFT) + return 35; + if (channel == AV_CHAN_WIDE_RIGHT) + return 36; + if (channel == AV_CHAN_LOW_FREQUENCY_2) + return 37; + if (channel == AV_CHAN_STEREO_LEFT) + return 38; + if (channel == AV_CHAN_STEREO_RIGHT) + return 39; + return 0; +} + +int ff_mov_get_channel_layout_tag(const AVCodecParameters *par, + uint32_t *layout, + uint32_t *bitmap, + uint32_t **pchannel_desc) { int i, j; uint32_t tag = 0; @@ -514,7 +534,7 @@ uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, /* find the layout list for the specified codec */ for (i = 0; mov_codec_ch_layouts[i].codec_id != AV_CODEC_ID_NONE; i++) { - if (mov_codec_ch_layouts[i].codec_id == codec_id) + if (mov_codec_ch_layouts[i].codec_id == par->codec_id) break; } if (mov_codec_ch_layouts[i].codec_id != AV_CODEC_ID_NONE) @@ -525,7 +545,7 @@ uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, const struct MovChannelLayoutMap *layout_map; /* get the layout map based on the channel count */ - channels = ch_layout->nb_channels; + channels = par->ch_layout.nb_channels; if (channels > 9) channels = 0; layout_map = mov_ch_layout_map[channels]; @@ -536,8 +556,8 @@ uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, continue; for (j = 0; layout_map[j].tag != 0; j++) { if (layout_map[j].tag == layouts[i] && - (ch_layout->order == AV_CHANNEL_ORDER_NATIVE && - layout_map[j].layout == ch_layout->u.mask)) + (par->ch_layout.order == AV_CHANNEL_ORDER_NATIVE && + layout_map[j].layout == par->ch_layout.u.mask)) break; } if (layout_map[j].tag) @@ -546,18 +566,39 @@ uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, tag = layouts[i]; } - /* if no tag was found, use channel bitmap as a backup if possible */ - if (tag == 0 && av_channel_layout_check(ch_layout) && - ch_layout->order == AV_CHANNEL_ORDER_NATIVE && - ch_layout->u.mask < 0x40000) { - tag = MOV_CH_LAYOUT_USE_BITMAP; - *bitmap = (uint32_t)ch_layout->u.mask; - } else - *bitmap = 0; + *layout = tag; + *bitmap = 0; + *pchannel_desc = NULL; + + /* if no tag was found, use channel bitmap or description as a backup if possible */ + if (tag == 0) { + uint32_t *channel_desc; + if (par->ch_layout.order == AV_CHANNEL_ORDER_NATIVE && + par->ch_layout.u.mask < 0x40000) { + *layout = MOV_CH_LAYOUT_USE_BITMAP; + *bitmap = (uint32_t)par->ch_layout.u.mask; + return 0; + } else if (par->ch_layout.order == AV_CHANNEL_ORDER_UNSPEC) + return AVERROR(ENOSYS); + + channel_desc = av_malloc_array(par->ch_layout.nb_channels, sizeof(*channel_desc)); + if (!channel_desc) + return AVERROR(ENOMEM); + + for (i = 0; i < par->ch_layout.nb_channels; i++) { + channel_desc[i] = + mov_get_channel_label(av_channel_layout_channel_from_index(&par->ch_layout, i)); + + if (channel_desc[i] == 0) { + av_free(channel_desc); + return AVERROR(ENOSYS); + } + } - /* TODO: set channel descriptions as a secondary backup */ + *pchannel_desc = channel_desc; + } - return tag; + return 0; } int ff_mov_read_chan(AVFormatContext *s, AVIOContext *pb, AVStream *st, diff --git a/libavformat/mov_chan.h b/libavformat/mov_chan.h index 9514dfa405..2815f15f07 100644 --- a/libavformat/mov_chan.h +++ b/libavformat/mov_chan.h @@ -30,6 +30,7 @@ #include "libavutil/channel_layout.h" #include "libavcodec/codec_id.h" +#include "libavcodec/codec_par.h" #include "avformat.h" /** @@ -41,9 +42,10 @@ * @param[out] bitmap channel bitmap * @return channel layout tag */ -uint32_t ff_mov_get_channel_layout_tag(enum AVCodecID codec_id, - const AVChannelLayout *ch_layout, - uint32_t *bitmap); +int ff_mov_get_channel_layout_tag(const AVCodecParameters *par, + uint32_t *layout, + uint32_t *bitmap, + uint32_t **pchannel_desc); /** * Read 'chan' tag from the input stream. diff --git a/libavformat/movenc.c b/libavformat/movenc.c index 46d66c29c2..263649f1da 100644 --- a/libavformat/movenc.c +++ b/libavformat/movenc.c @@ -867,20 +867,27 @@ static int mov_write_dmlp_tag(AVFormatContext *s, AVIOContext *pb, MOVTrack *tra static int mov_write_chan_tag(AVFormatContext *s, AVIOContext *pb, MOVTrack *track) { - uint32_t layout_tag, bitmap; + uint32_t layout_tag, bitmap, *channel_desc; int64_t pos = avio_tell(pb); + int num_desc, ret; - layout_tag = ff_mov_get_channel_layout_tag(track->par->codec_id, - &track->par->ch_layout, - &bitmap); - if (!layout_tag) { - av_log(s, AV_LOG_WARNING, "not writing 'chan' tag due to " - "lack of channel information\n"); + if (track->multichannel_as_mono) return 0; + + ret = ff_mov_get_channel_layout_tag(track->par, &layout_tag, + &bitmap, &channel_desc); + + if (ret < 0) { + if (ret == AVERROR(ENOSYS)) { + av_log(s, AV_LOG_WARNING, "not writing 'chan' tag due to " + "lack of channel information\n"); + ret = 0; + } + + return ret; } - if (track->multichannel_as_mono) - return 0; + num_desc = layout_tag ? 0 : track->par->ch_layout.nb_channels; avio_wb32(pb, 0); // Size ffio_wfourcc(pb, "chan"); // Type @@ -888,7 +895,17 @@ static int mov_write_chan_tag(AVFormatContext *s, AVIOContext *pb, MOVTrack *tra avio_wb24(pb, 0); // Flags avio_wb32(pb, layout_tag); // mChannelLayoutTag avio_wb32(pb, bitmap); // mChannelBitmap - avio_wb32(pb, 0); // mNumberChannelDescriptions + avio_wb32(pb, num_desc); // mNumberChannelDescriptions + + for (int i = 0; i < num_desc; i++) { + avio_wb32(pb, channel_desc[i]); // mChannelLabel + avio_wb32(pb, 0); // mChannelFlags + avio_wl32(pb, 0); // mCoordinates[0] + avio_wl32(pb, 0); // mCoordinates[1] + avio_wl32(pb, 0); // mCoordinates[2] + } + + av_free(channel_desc); return update_size(pb, pos); } -- 2.35.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-03-28 23:26 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-28 23:24 [FFmpeg-devel] [PATCH 1/7] avformat/mov_chan: rename mov_get_channel_label() to better reflect its purpose James Almer 2022-03-28 23:24 ` [FFmpeg-devel] [PATCH 2/7] avformat/mov_chan: add a few missing channel label mappings James Almer 2022-03-28 23:24 ` [FFmpeg-devel] [PATCH 3/7] avformat/mov_chan: use a higher log level for a debug message James Almer 2022-03-28 23:24 ` James Almer [this message] 2022-03-28 23:24 ` [FFmpeg-devel] [PATCH 5/7] avformat/mov_chan: move the definition of MovChannelLayoutTag to the header James Almer 2022-03-28 23:24 ` [FFmpeg-devel] [PATCH 6/7] avformat/movenc: don't use mono layout when a front center label is expected James Almer 2022-03-28 23:24 ` [FFmpeg-devel] [PATCH 7/7] fate: add a test for writing channel descriptions in mov James Almer 2022-04-05 12:20 ` [FFmpeg-devel] [PATCH 1/7] avformat/mov_chan: rename mov_get_channel_label() to better reflect its purpose James Almer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220328232453.54773-4-jamrial@gmail.com \ --to=jamrial@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git