* [FFmpeg-devel] [PATCH v4 1/2] lavf/mpegenc: fix ever-growing fifo size since the new API
@ 2022-03-22 17:23 Nicolas Gaullier
2022-03-22 17:23 ` [FFmpeg-devel] [PATCH v4 2/2] lavf/mpegenc: fix termination following a fifo overrun Nicolas Gaullier
0 siblings, 1 reply; 2+ messages in thread
From: Nicolas Gaullier @ 2022-03-22 17:23 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Nicolas Gaullier
The older av_fifo_realloc2 implemented an auto grow that
should be ported as such in the new API.
This patch introduces a limitation in the fifo buffer size.
The default is set to 128MB and may be overriden by a new user option.
The amount of memory allocated depends on multiple factors, including
the number of audio streams.
A worst case scenario is where an out-of-spec high video bitrate is
combined with numerous low bitrate audios.
A fatal error mentions the availability of fifo_size_limit option.
Fix regressing since ea511196a6c85eb433e10cdbecb0b2c722faf20d
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
---
libavformat/mpegenc.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/libavformat/mpegenc.c b/libavformat/mpegenc.c
index cc47a43288..e0955a7d33 100644
--- a/libavformat/mpegenc.c
+++ b/libavformat/mpegenc.c
@@ -84,6 +84,7 @@ typedef struct MpegMuxContext {
int64_t vcd_padding_bytes_written;
int preload;
+ int fifo_size_limit;
} MpegMuxContext;
extern const AVOutputFormat ff_mpeg1vcd_muxer;
@@ -461,9 +462,10 @@ static av_cold int mpeg_mux_init(AVFormatContext *ctx)
av_get_media_type_string(st->codecpar->codec_type), i);
return AVERROR(EINVAL);
}
- stream->fifo = av_fifo_alloc2(16, 1, 0);
+ stream->fifo = av_fifo_alloc2(16, 1, AV_FIFO_FLAG_AUTO_GROW);
if (!stream->fifo)
return AVERROR(ENOMEM);
+ av_fifo_auto_grow_limit(stream->fifo, s->fifo_size_limit);
}
bitrate = 0;
audio_bitrate = 0;
@@ -1207,10 +1209,6 @@ static int mpeg_mux_write_packet(AVFormatContext *ctx, AVPacket *pkt)
pkt_desc->unwritten_size =
pkt_desc->size = size;
- ret = av_fifo_grow2(stream->fifo, size);
- if (ret < 0)
- return ret;
-
if (s->is_dvd) {
// min VOBU length 0.4 seconds (mpucoder)
if (is_iframe &&
@@ -1222,10 +1220,15 @@ static int mpeg_mux_write_packet(AVFormatContext *ctx, AVPacket *pkt)
}
}
- av_fifo_write(stream->fifo, buf, size);
+ ret = av_fifo_write(stream->fifo, buf, size);
+ if (ret == AVERROR(ENOSPC))
+ av_log(s, AV_LOG_FATAL, "Input stream buffer overrun. "
+ "To avoid, increase fifo_size_limit option.\n");
+ if (ret < 0)
+ return ret;
for (;;) {
- int ret = output_packet(ctx, 0);
+ ret = output_packet(ctx, 0);
if (ret <= 0)
return ret;
}
@@ -1277,6 +1280,7 @@ static void mpeg_mux_deinit(AVFormatContext *ctx)
static const AVOption options[] = {
{ "muxrate", NULL, OFFSET(user_mux_rate), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, ((1<<22) - 1) * (8 * 50), E },
{ "preload", "Initial demux-decode delay in microseconds.", OFFSET(preload), AV_OPT_TYPE_INT, { .i64 = 500000 }, 0, INT_MAX, E },
+ { "fifo_size_limit", "Maximum allowed memory for buffering an input stream in bytes", OFFSET(fifo_size_limit), AV_OPT_TYPE_INT, {.i64 = 128 * 1024 * 1024 }, 16, FFMIN(INT_MAX, SIZE_MAX), E},
{ NULL },
};
--
2.34.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
* [FFmpeg-devel] [PATCH v4 2/2] lavf/mpegenc: fix termination following a fifo overrun
2022-03-22 17:23 [FFmpeg-devel] [PATCH v4 1/2] lavf/mpegenc: fix ever-growing fifo size since the new API Nicolas Gaullier
@ 2022-03-22 17:23 ` Nicolas Gaullier
0 siblings, 0 replies; 2+ messages in thread
From: Nicolas Gaullier @ 2022-03-22 17:23 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Nicolas Gaullier
Avoid an infinite 'retry' loop in output_packet when flushing.
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
---
libavformat/mpegenc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/libavformat/mpegenc.c b/libavformat/mpegenc.c
index e0955a7d33..91574ca95a 100644
--- a/libavformat/mpegenc.c
+++ b/libavformat/mpegenc.c
@@ -85,6 +85,7 @@ typedef struct MpegMuxContext {
int preload;
int fifo_size_limit;
+ int fifo_size_exceeded;
} MpegMuxContext;
extern const AVOutputFormat ff_mpeg1vcd_muxer;
@@ -1221,9 +1222,11 @@ static int mpeg_mux_write_packet(AVFormatContext *ctx, AVPacket *pkt)
}
ret = av_fifo_write(stream->fifo, buf, size);
- if (ret == AVERROR(ENOSPC))
+ if (ret == AVERROR(ENOSPC)) {
+ s->fifo_size_exceeded = 1;
av_log(s, AV_LOG_FATAL, "Input stream buffer overrun. "
"To avoid, increase fifo_size_limit option.\n");
+ }
if (ret < 0)
return ret;
@@ -1236,9 +1239,13 @@ static int mpeg_mux_write_packet(AVFormatContext *ctx, AVPacket *pkt)
static int mpeg_mux_end(AVFormatContext *ctx)
{
+ MpegMuxContext *s = ctx->priv_data;
StreamInfo *stream;
int i;
+ if (s->fifo_size_exceeded)
+ return 0;
+
for (;;) {
int ret = output_packet(ctx, 1);
if (ret < 0)
--
2.34.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-03-22 17:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-22 17:23 [FFmpeg-devel] [PATCH v4 1/2] lavf/mpegenc: fix ever-growing fifo size since the new API Nicolas Gaullier
2022-03-22 17:23 ` [FFmpeg-devel] [PATCH v4 2/2] lavf/mpegenc: fix termination following a fifo overrun Nicolas Gaullier
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git