* [FFmpeg-devel] [PATCH v1 1/4] lavc/vaapi_encode_h265: Add P frame to GPB frame support for hevc_vaapi
@ 2022-02-18 1:42 Fei Wang
2022-02-18 1:42 ` [FFmpeg-devel] [PATCH v1 2/4] vaapi_encode: Move block size calculation after entrypoint selection Fei Wang
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Fei Wang @ 2022-02-18 1:42 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Fei Wang, Linjie Fu
From: Linjie Fu <linjie.fu@intel.com>
Use GPB frames to replace regular P frames if backend driver does not
support it.
- GPB:
Generalized P and B picture. P frames replaced by B frames with
forward-predict only, L0 == L1. Normal B frames still have 2
different ref_lists and allow bi-prediction
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
---
libavcodec/vaapi_encode.c | 33 +++++++++++++++++++++++++++++++--
libavcodec/vaapi_encode.h | 1 +
libavcodec/vaapi_encode_h265.c | 15 +++++++++++++++
3 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
index 3bf379b1a0..95eca7c288 100644
--- a/libavcodec/vaapi_encode.c
+++ b/libavcodec/vaapi_encode.c
@@ -1845,6 +1845,30 @@ static av_cold int vaapi_encode_init_gop_structure(AVCodecContext *avctx)
ref_l1 = attr.value >> 16 & 0xffff;
}
+ ctx->p_to_gpb = 0;
+
+#if VA_CHECK_VERSION(1, 9, 0)
+ attr = (VAConfigAttrib) { VAConfigAttribPredictionDirection };
+ vas = vaGetConfigAttributes(ctx->hwctx->display,
+ ctx->va_profile,
+ ctx->va_entrypoint,
+ &attr, 1);
+ if (vas != VA_STATUS_SUCCESS) {
+ av_log(avctx, AV_LOG_WARNING, "Failed to query prediction direction "
+ "attribute: %d (%s).\n", vas, vaErrorStr(vas));
+ } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
+ av_log(avctx, AV_LOG_VERBOSE, "Driver does not report whether "
+ "support GPB, use regular P frames.\n");
+ } else {
+ if (attr.value & VA_PREDICTION_DIRECTION_BI_NOT_EMPTY) {
+ ctx->p_to_gpb = 1;
+ av_log(avctx, AV_LOG_VERBOSE, "Use GPB B frames to replace "
+ "regular P frames.\n");
+ } else
+ av_log(avctx, AV_LOG_VERBOSE, "Use regular P frames.\n");
+ }
+#endif
+
if (ctx->codec->flags & FLAG_INTRA_ONLY ||
avctx->gop_size <= 1) {
av_log(avctx, AV_LOG_VERBOSE, "Using intra frames only.\n");
@@ -1861,8 +1885,13 @@ static av_cold int vaapi_encode_init_gop_structure(AVCodecContext *avctx)
ctx->p_per_i = INT_MAX;
ctx->b_per_p = 0;
} else {
- av_log(avctx, AV_LOG_VERBOSE, "Using intra, P- and B-frames "
- "(supported references: %d / %d).\n", ref_l0, ref_l1);
+ if (ctx->p_to_gpb)
+ av_log(avctx, AV_LOG_VERBOSE, "Using intra, GPB-B-frames and "
+ "B-frames (supported references: %d / %d).\n",
+ ref_l0, ref_l1);
+ else
+ av_log(avctx, AV_LOG_VERBOSE, "Using intra, P- and B-frames "
+ "(supported references: %d / %d).\n", ref_l0, ref_l1);
ctx->gop_size = avctx->gop_size;
ctx->p_per_i = INT_MAX;
ctx->b_per_p = avctx->max_b_frames;
diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
index b41604a883..61c5615eb8 100644
--- a/libavcodec/vaapi_encode.h
+++ b/libavcodec/vaapi_encode.h
@@ -328,6 +328,7 @@ typedef struct VAAPIEncodeContext {
int idr_counter;
int gop_counter;
int end_of_stream;
+ int p_to_gpb;
// Whether the driver supports ROI at all.
int roi_allowed;
diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
index e1dc53dfa9..ea45893508 100644
--- a/libavcodec/vaapi_encode_h265.c
+++ b/libavcodec/vaapi_encode_h265.c
@@ -886,6 +886,7 @@ static int vaapi_encode_h265_init_slice_params(AVCodecContext *avctx,
VAAPIEncodePicture *pic,
VAAPIEncodeSlice *slice)
{
+ VAAPIEncodeContext *ctx = avctx->priv_data;
VAAPIEncodeH265Context *priv = avctx->priv_data;
VAAPIEncodeH265Picture *hpic = pic->priv_data;
const H265RawSPS *sps = &priv->raw_sps;
@@ -908,6 +909,9 @@ static int vaapi_encode_h265_init_slice_params(AVCodecContext *avctx,
sh->slice_type = hpic->slice_type;
+ if (sh->slice_type == HEVC_SLICE_P && ctx->p_to_gpb)
+ sh->slice_type = HEVC_SLICE_B;
+
sh->slice_pic_order_cnt_lsb = hpic->pic_order_cnt &
(1 << (sps->log2_max_pic_order_cnt_lsb_minus4 + 4)) - 1;
@@ -1066,6 +1070,9 @@ static int vaapi_encode_h265_init_slice_params(AVCodecContext *avctx,
av_assert0(pic->type == PICTURE_TYPE_P ||
pic->type == PICTURE_TYPE_B);
vslice->ref_pic_list0[0] = vpic->reference_frames[0];
+ if (ctx->p_to_gpb && pic->type == PICTURE_TYPE_P)
+ // Reference for GPB B-frame, L0 == L1
+ vslice->ref_pic_list1[0] = vpic->reference_frames[0];
}
if (pic->nb_refs >= 2) {
// Forward reference for B-frame.
@@ -1073,6 +1080,14 @@ static int vaapi_encode_h265_init_slice_params(AVCodecContext *avctx,
vslice->ref_pic_list1[0] = vpic->reference_frames[1];
}
+ if (pic->type == PICTURE_TYPE_P && ctx->p_to_gpb) {
+ vslice->slice_type = HEVC_SLICE_B;
+ for (i = 0; i < FF_ARRAY_ELEMS(vslice->ref_pic_list0); i++) {
+ vslice->ref_pic_list1[i].picture_id = vslice->ref_pic_list0[i].picture_id;
+ vslice->ref_pic_list1[i].flags = vslice->ref_pic_list0[i].flags;
+ }
+ }
+
return 0;
}
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
* [FFmpeg-devel] [PATCH v1 2/4] vaapi_encode: Move block size calculation after entrypoint selection
2022-02-18 1:42 [FFmpeg-devel] [PATCH v1 1/4] lavc/vaapi_encode_h265: Add P frame to GPB frame support for hevc_vaapi Fei Wang
@ 2022-02-18 1:42 ` Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 3/4] vaapi_encode_h265: Explicitly set and correct some flags Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features Fei Wang
2 siblings, 0 replies; 6+ messages in thread
From: Fei Wang @ 2022-02-18 1:42 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Mark Thompson, Fei Wang
From: Mark Thompson <sw@jkqxz.net>
The block size can be dependent on the profile and entrypoint selected.
It defaults to 16x16, with codecs able to override this choice with their
own function.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
---
libavcodec/vaapi_encode.c | 14 ++++++++++++++
libavcodec/vaapi_encode.h | 7 +++++++
libavcodec/vaapi_encode_h265.c | 32 ++++++++++++++++++++++++++------
libavcodec/vaapi_encode_mjpeg.c | 16 +++++++++++++---
libavcodec/vaapi_encode_mpeg2.c | 3 ---
libavcodec/vaapi_encode_vp8.c | 3 ---
libavcodec/vaapi_encode_vp9.c | 14 ++++++++++----
7 files changed, 70 insertions(+), 19 deletions(-)
diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
index 95eca7c288..763fe50009 100644
--- a/libavcodec/vaapi_encode.c
+++ b/libavcodec/vaapi_encode.c
@@ -2041,6 +2041,8 @@ static av_cold int vaapi_encode_init_slice_structure(AVCodecContext *avctx)
return 0;
}
+ av_assert0(ctx->slice_block_height > 0 && ctx->slice_block_width > 0);
+
ctx->slice_block_rows = (avctx->height + ctx->slice_block_height - 1) /
ctx->slice_block_height;
ctx->slice_block_cols = (avctx->width + ctx->slice_block_width - 1) /
@@ -2430,6 +2432,18 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
if (err < 0)
goto fail;
+ if (ctx->codec->get_encoder_caps) {
+ ctx->codec->get_encoder_caps(avctx);
+ } else {
+ // Assume 16x16 blocks.
+ ctx->surface_width = FFALIGN(avctx->width, 16);
+ ctx->surface_height = FFALIGN(avctx->height, 16);
+ if (ctx->codec->flags & FLAG_SLICE_CONTROL) {
+ ctx->slice_block_width = 16;
+ ctx->slice_block_height = 16;
+ }
+ }
+
err = vaapi_encode_init_rate_control(avctx);
if (err < 0)
goto fail;
diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
index 61c5615eb8..2e5cfd7a72 100644
--- a/libavcodec/vaapi_encode.h
+++ b/libavcodec/vaapi_encode.h
@@ -376,6 +376,13 @@ typedef struct VAAPIEncodeType {
// factor depending on RC mode.
int default_quality;
+ // Determine encode parameters like block sizes for surface alignment
+ // and slices. This may need to query the profile and entrypoint,
+ // which will be available when this function is called. If not set,
+ // assume that all blocks are 16x16 and that surfaces should be
+ // aligned to match this.
+ void (*get_encoder_caps)(AVCodecContext *avctx);
+
// Perform any extra codec-specific configuration after the
// codec context is initialised (set up the private data and
// add any necessary global parameters).
diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
index ea45893508..5b8dbe841d 100644
--- a/libavcodec/vaapi_encode_h265.c
+++ b/libavcodec/vaapi_encode_h265.c
@@ -55,6 +55,10 @@ typedef struct VAAPIEncodeH265Picture {
typedef struct VAAPIEncodeH265Context {
VAAPIEncodeContext common;
+ // Encoder features.
+ uint32_t ctu_size;
+ uint32_t min_cb_size;
+
// User options.
int qp;
int aud;
@@ -1091,6 +1095,27 @@ static int vaapi_encode_h265_init_slice_params(AVCodecContext *avctx,
return 0;
}
+static av_cold void vaapi_encode_h265_get_encoder_caps(AVCodecContext *avctx)
+{
+ VAAPIEncodeContext *ctx = avctx->priv_data;
+ VAAPIEncodeH265Context *priv = avctx->priv_data;
+
+ if (!priv->ctu_size) {
+ priv->ctu_size = 32;
+ priv->min_cb_size = 16;
+ }
+ av_log(avctx, AV_LOG_VERBOSE, "Using CTU size %dx%d, "
+ "min CB size %dx%d.\n", priv->ctu_size, priv->ctu_size,
+ priv->min_cb_size, priv->min_cb_size);
+
+ ctx->surface_width = FFALIGN(avctx->width, priv->min_cb_size);
+ ctx->surface_height = FFALIGN(avctx->height, priv->min_cb_size);
+
+ ctx->slice_block_width = ctx->slice_block_height = priv->ctu_size;
+
+ return;
+}
+
static av_cold int vaapi_encode_h265_configure(AVCodecContext *avctx)
{
VAAPIEncodeContext *ctx = avctx->priv_data;
@@ -1160,6 +1185,7 @@ static const VAAPIEncodeType vaapi_encode_type_h265 = {
.default_quality = 25,
+ .get_encoder_caps = &vaapi_encode_h265_get_encoder_caps,
.configure = &vaapi_encode_h265_configure,
.picture_priv_data_size = sizeof(VAAPIEncodeH265Picture),
@@ -1205,12 +1231,6 @@ static av_cold int vaapi_encode_h265_init(AVCodecContext *avctx)
VA_ENC_PACKED_HEADER_SLICE | // Slice headers.
VA_ENC_PACKED_HEADER_MISC; // SEI
- ctx->surface_width = FFALIGN(avctx->width, 16);
- ctx->surface_height = FFALIGN(avctx->height, 16);
-
- // CTU size is currently hard-coded to 32.
- ctx->slice_block_width = ctx->slice_block_height = 32;
-
if (priv->qp > 0)
ctx->explicit_qp = priv->qp;
diff --git a/libavcodec/vaapi_encode_mjpeg.c b/libavcodec/vaapi_encode_mjpeg.c
index 6206b23e5f..c4fe879073 100644
--- a/libavcodec/vaapi_encode_mjpeg.c
+++ b/libavcodec/vaapi_encode_mjpeg.c
@@ -434,6 +434,18 @@ static int vaapi_encode_mjpeg_init_slice_params(AVCodecContext *avctx,
return 0;
}
+static av_cold void vaapi_encode_mjpeg_get_encoder_caps(AVCodecContext *avctx)
+{
+ VAAPIEncodeContext *ctx = avctx->priv_data;
+ const AVPixFmtDescriptor *desc;
+
+ desc = av_pix_fmt_desc_get(ctx->input_frames->sw_format);
+ av_assert0(desc);
+
+ ctx->surface_width = FFALIGN(avctx->width, 8 << desc->log2_chroma_w);
+ ctx->surface_height = FFALIGN(avctx->height, 8 << desc->log2_chroma_h);
+}
+
static av_cold int vaapi_encode_mjpeg_configure(AVCodecContext *avctx)
{
VAAPIEncodeContext *ctx = avctx->priv_data;
@@ -483,6 +495,7 @@ static const VAAPIEncodeType vaapi_encode_type_mjpeg = {
.flags = FLAG_CONSTANT_QUALITY_ONLY |
FLAG_INTRA_ONLY,
+ .get_encoder_caps = &vaapi_encode_mjpeg_get_encoder_caps,
.configure = &vaapi_encode_mjpeg_configure,
.default_quality = 80,
@@ -509,9 +522,6 @@ static av_cold int vaapi_encode_mjpeg_init(AVCodecContext *avctx)
ctx->desired_packed_headers =
VA_ENC_PACKED_HEADER_RAW_DATA;
- ctx->surface_width = FFALIGN(avctx->width, 8);
- ctx->surface_height = FFALIGN(avctx->height, 8);
-
return ff_vaapi_encode_init(avctx);
}
diff --git a/libavcodec/vaapi_encode_mpeg2.c b/libavcodec/vaapi_encode_mpeg2.c
index d084d8c4b9..f8809b08ab 100644
--- a/libavcodec/vaapi_encode_mpeg2.c
+++ b/libavcodec/vaapi_encode_mpeg2.c
@@ -623,9 +623,6 @@ static av_cold int vaapi_encode_mpeg2_init(AVCodecContext *avctx)
ctx->desired_packed_headers = VA_ENC_PACKED_HEADER_SEQUENCE |
VA_ENC_PACKED_HEADER_PICTURE;
- ctx->surface_width = FFALIGN(avctx->width, 16);
- ctx->surface_height = FFALIGN(avctx->height, 16);
-
return ff_vaapi_encode_init(avctx);
}
diff --git a/libavcodec/vaapi_encode_vp8.c b/libavcodec/vaapi_encode_vp8.c
index 7d4578f674..ab3c84a618 100644
--- a/libavcodec/vaapi_encode_vp8.c
+++ b/libavcodec/vaapi_encode_vp8.c
@@ -210,9 +210,6 @@ static av_cold int vaapi_encode_vp8_init(AVCodecContext *avctx)
// adding them anyway.
ctx->desired_packed_headers = 0;
- ctx->surface_width = FFALIGN(avctx->width, 16);
- ctx->surface_height = FFALIGN(avctx->height, 16);
-
return ff_vaapi_encode_init(avctx);
}
diff --git a/libavcodec/vaapi_encode_vp9.c b/libavcodec/vaapi_encode_vp9.c
index be706e3bd6..b7560c4b81 100644
--- a/libavcodec/vaapi_encode_vp9.c
+++ b/libavcodec/vaapi_encode_vp9.c
@@ -184,6 +184,15 @@ static int vaapi_encode_vp9_init_picture_params(AVCodecContext *avctx,
return 0;
}
+static av_cold void vaapi_encode_vp9_get_encoder_caps(AVCodecContext *avctx)
+{
+ VAAPIEncodeContext *ctx = avctx->priv_data;
+
+ // Surfaces must be aligned to 64x64 superblock boundaries.
+ ctx->surface_width = FFALIGN(avctx->width, 64);
+ ctx->surface_height = FFALIGN(avctx->height, 64);
+}
+
static av_cold int vaapi_encode_vp9_configure(AVCodecContext *avctx)
{
VAAPIEncodeContext *ctx = avctx->priv_data;
@@ -231,6 +240,7 @@ static const VAAPIEncodeType vaapi_encode_type_vp9 = {
.picture_priv_data_size = sizeof(VAAPIEncodeVP9Picture),
+ .get_encoder_caps = &vaapi_encode_vp9_get_encoder_caps,
.configure = &vaapi_encode_vp9_configure,
.sequence_params_size = sizeof(VAEncSequenceParameterBufferVP9),
@@ -251,10 +261,6 @@ static av_cold int vaapi_encode_vp9_init(AVCodecContext *avctx)
// can write its own headers and there is no metadata to include.
ctx->desired_packed_headers = 0;
- // Surfaces must be aligned to superblock boundaries.
- ctx->surface_width = FFALIGN(avctx->width, 64);
- ctx->surface_height = FFALIGN(avctx->height, 64);
-
return ff_vaapi_encode_init(avctx);
}
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
* [FFmpeg-devel] [PATCH v1 3/4] vaapi_encode_h265: Explicitly set and correct some flags
2022-02-18 1:42 [FFmpeg-devel] [PATCH v1 1/4] lavc/vaapi_encode_h265: Add P frame to GPB frame support for hevc_vaapi Fei Wang
2022-02-18 1:42 ` [FFmpeg-devel] [PATCH v1 2/4] vaapi_encode: Move block size calculation after entrypoint selection Fei Wang
@ 2022-02-18 1:43 ` Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features Fei Wang
2 siblings, 0 replies; 6+ messages in thread
From: Fei Wang @ 2022-02-18 1:43 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Mark Thompson, Fei Wang
From: Mark Thompson <sw@jkqxz.net>
max_14bit_constraint_flag should be set if the bit depth is not greater than
14 (currently always true).
one_picture_only_flag should not be set because we don't support the still
picture profiles.
general_profile_compatibility_flag should be set according to general_profile_idc
instead of bit depth.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
---
libavcodec/vaapi_encode_h265.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
index 5b8dbe841d..8319848e4a 100644
--- a/libavcodec/vaapi_encode_h265.c
+++ b/libavcodec/vaapi_encode_h265.c
@@ -303,17 +303,21 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
ptl->general_profile_idc = avctx->profile;
ptl->general_tier_flag = priv->tier;
- if (chroma_format == 1) {
- ptl->general_profile_compatibility_flag[1] = bit_depth == 8;
- ptl->general_profile_compatibility_flag[2] = bit_depth <= 10;
+ ptl->general_profile_compatibility_flag[ptl->general_profile_idc] = 1;
+
+ if (ptl->general_profile_compatibility_flag[1])
+ ptl->general_profile_compatibility_flag[2] = 1;
+ if (ptl->general_profile_compatibility_flag[3]) {
+ ptl->general_profile_compatibility_flag[1] = 1;
+ ptl->general_profile_compatibility_flag[2] = 1;
}
- ptl->general_profile_compatibility_flag[4] = 1;
ptl->general_progressive_source_flag = 1;
ptl->general_interlaced_source_flag = 0;
ptl->general_non_packed_constraint_flag = 1;
ptl->general_frame_only_constraint_flag = 1;
+ ptl->general_max_14bit_constraint_flag = bit_depth <= 14;
ptl->general_max_12bit_constraint_flag = bit_depth <= 12;
ptl->general_max_10bit_constraint_flag = bit_depth <= 10;
ptl->general_max_8bit_constraint_flag = bit_depth == 8;
@@ -323,6 +327,7 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
ptl->general_max_monochrome_constraint_flag = chroma_format == 0;
ptl->general_intra_constraint_flag = ctx->gop_size == 1;
+ ptl->general_one_picture_only_constraint_flag = 0;
ptl->general_lower_bit_rate_constraint_flag = 1;
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
* [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features
2022-02-18 1:42 [FFmpeg-devel] [PATCH v1 1/4] lavc/vaapi_encode_h265: Add P frame to GPB frame support for hevc_vaapi Fei Wang
2022-02-18 1:42 ` [FFmpeg-devel] [PATCH v1 2/4] vaapi_encode: Move block size calculation after entrypoint selection Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 3/4] vaapi_encode_h265: Explicitly set and correct some flags Fei Wang
@ 2022-02-18 1:43 ` Fei Wang
2022-02-18 4:38 ` Xiang, Haihao
2 siblings, 1 reply; 6+ messages in thread
From: Fei Wang @ 2022-02-18 1:43 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Mark Thompson, Fei Wang
From: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
---
libavcodec/vaapi_encode_h265.c | 107 +++++++++++++++++++++++++++++++--
1 file changed, 102 insertions(+), 5 deletions(-)
diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
index 8319848e4a..e98502503d 100644
--- a/libavcodec/vaapi_encode_h265.c
+++ b/libavcodec/vaapi_encode_h265.c
@@ -56,6 +56,9 @@ typedef struct VAAPIEncodeH265Context {
VAAPIEncodeContext common;
// Encoder features.
+ uint32_t va_features;
+ // Block size info.
+ uint32_t va_bs;
uint32_t ctu_size;
uint32_t min_cb_size;
@@ -427,9 +430,9 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
vps->vps_max_latency_increase_plus1[i];
}
- // These have to come from the capabilities of the encoder. We have no
- // way to query them, so just hardcode parameters which work on the Intel
- // driver.
+ // These values come from the capabilities of the first encoder
+ // implementation in the i965 driver on Intel Skylake. They may
+ // fail badly with other platforms or drivers.
// CTB size from 8x8 to 32x32.
sps->log2_min_luma_coding_block_size_minus3 = 0;
sps->log2_diff_max_min_luma_coding_block_size = 2;
@@ -447,6 +450,42 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
sps->pcm_enabled_flag = 0;
+// update sps setting according to queried result
+#if VA_CHECK_VERSION(1, 13, 0)
+ if (priv->va_features) {
+ VAConfigAttribValEncHEVCFeatures features = { .value = priv->va_features };
+
+ // Enable feature if get queried result is VA_FEATURE_SUPPORTED | VA_FEATURE_REQUIRED
+ sps->amp_enabled_flag =
+ !!features.bits.amp;
+ sps->sample_adaptive_offset_enabled_flag =
+ !!features.bits.sao;
+ sps->sps_temporal_mvp_enabled_flag =
+ !!features.bits.temporal_mvp;
+ sps->pcm_enabled_flag =
+ !!features.bits.pcm;
+ }
+
+ if (priv->va_bs) {
+ VAConfigAttribValEncHEVCBlockSizes bs = { .value = priv->va_bs };
+ sps->log2_min_luma_coding_block_size_minus3 =
+ ff_ctz(priv->min_cb_size) - 3;
+ sps->log2_diff_max_min_luma_coding_block_size =
+ ff_ctz(priv->ctu_size) - ff_ctz(priv->min_cb_size);
+
+ sps->log2_min_luma_transform_block_size_minus2 =
+ bs.bits.log2_min_luma_transform_block_size_minus2;
+ sps->log2_diff_max_min_luma_transform_block_size =
+ bs.bits.log2_max_luma_transform_block_size_minus2 -
+ bs.bits.log2_min_luma_transform_block_size_minus2;
+
+ sps->max_transform_hierarchy_depth_inter =
+ bs.bits.max_max_transform_hierarchy_depth_inter;
+ sps->max_transform_hierarchy_depth_intra =
+ bs.bits.max_max_transform_hierarchy_depth_intra;
+ }
+#endif
+
// STRPSs should ideally be here rather than defined individually in
// each slice, but the structure isn't completely fixed so for now
// don't bother.
@@ -539,6 +578,23 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
pps->cu_qp_delta_enabled_flag = (ctx->va_rc_mode != VA_RC_CQP);
pps->diff_cu_qp_delta_depth = 0;
+// update pps setting according to queried result
+#if VA_CHECK_VERSION(1, 13, 0)
+ if (priv->va_features) {
+ VAConfigAttribValEncHEVCFeatures features = { .value = priv->va_features };
+ if (ctx->va_rc_mode != VA_RC_CQP)
+ pps->cu_qp_delta_enabled_flag =
+ !!features.bits.cu_qp_delta;
+
+ pps->transform_skip_enabled_flag =
+ !!features.bits.transform_skip;
+ // set diff_cu_qp_delta_depth as its max value if cu_qp_delta enabled. Otherwise
+ // 0 will make cu_qp_delta invalid.
+ if (pps->cu_qp_delta_enabled_flag)
+ pps->diff_cu_qp_delta_depth = sps->log2_diff_max_min_luma_coding_block_size;
+ }
+#endif
+
if (ctx->tile_rows && ctx->tile_cols) {
int uniform_spacing;
@@ -640,8 +696,8 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
.coded_buf = VA_INVALID_ID,
- .collocated_ref_pic_index = 0xff,
-
+ .collocated_ref_pic_index = sps->sps_temporal_mvp_enabled_flag ?
+ 0 : 0xff,
.last_picture = 0,
.pic_init_qp = pps->init_qp_minus26 + 26,
@@ -674,6 +730,8 @@ static int vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
.entropy_coding_sync_enabled_flag = pps->entropy_coding_sync_enabled_flag,
.loop_filter_across_tiles_enabled_flag =
pps->loop_filter_across_tiles_enabled_flag,
+ .pps_loop_filter_across_slices_enabled_flag =
+ pps->pps_loop_filter_across_slices_enabled_flag,
.scaling_list_data_present_flag = (sps->sps_scaling_list_data_present_flag |
pps->pps_scaling_list_data_present_flag),
.screen_content_flag = 0,
@@ -1105,6 +1163,45 @@ static av_cold void vaapi_encode_h265_get_encoder_caps(AVCodecContext *avctx)
VAAPIEncodeContext *ctx = avctx->priv_data;
VAAPIEncodeH265Context *priv = avctx->priv_data;
+#if VA_CHECK_VERSION(1, 13, 0)
+ {
+ VAConfigAttribValEncHEVCBlockSizes block_size;
+ VAConfigAttrib attr;
+ VAStatus vas;
+
+ attr.type = VAConfigAttribEncHEVCFeatures;
+ vas = vaGetConfigAttributes(ctx->hwctx->display, ctx->va_profile,
+ ctx->va_entrypoint, &attr, 1);
+ if (vas != VA_STATUS_SUCCESS) {
+ av_log(avctx, AV_LOG_WARNING, "Failed to query encoder "
+ "features, using guessed defaults.\n");
+ } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
+ av_log(avctx, AV_LOG_WARNING, "Driver does not advertise "
+ "encoder features, using guessed defaults.\n");
+ } else {
+ priv->va_features = attr.value;
+ }
+
+ attr.type = VAConfigAttribEncHEVCBlockSizes;
+ vas = vaGetConfigAttributes(ctx->hwctx->display, ctx->va_profile,
+ ctx->va_entrypoint, &attr, 1);
+ if (vas != VA_STATUS_SUCCESS) {
+ av_log(avctx, AV_LOG_WARNING, "Failed to query encoder "
+ "block size, using guessed defaults.\n");
+ } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
+ av_log(avctx, AV_LOG_WARNING, "Driver does not advertise "
+ "encoder block size, using guessed defaults.\n");
+ } else {
+ priv->va_bs = block_size.value = attr.value;
+
+ priv->ctu_size =
+ 1 << block_size.bits.log2_max_coding_tree_block_size_minus3 + 3;
+ priv->min_cb_size =
+ 1 << block_size.bits.log2_min_luma_coding_block_size_minus3 + 3;
+ }
+ }
+#endif
+
if (!priv->ctu_size) {
priv->ctu_size = 32;
priv->min_cb_size = 16;
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features Fei Wang
@ 2022-02-18 4:38 ` Xiang, Haihao
2022-02-21 2:21 ` Wang, Fei W
0 siblings, 1 reply; 6+ messages in thread
From: Xiang, Haihao @ 2022-02-18 4:38 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: sw, Wang, Fei W
On Fri, 2022-02-18 at 09:43 +0800, Fei Wang wrote:
> From: Mark Thompson <sw@jkqxz.net>
>
> Signed-off-by: Fei Wang <fei.w.wang@intel.com>
> ---
> libavcodec/vaapi_encode_h265.c | 107 +++++++++++++++++++++++++++++++--
> 1 file changed, 102 insertions(+), 5 deletions(-)
>
> diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
> index 8319848e4a..e98502503d 100644
> --- a/libavcodec/vaapi_encode_h265.c
> +++ b/libavcodec/vaapi_encode_h265.c
> @@ -56,6 +56,9 @@ typedef struct VAAPIEncodeH265Context {
> VAAPIEncodeContext common;
>
> // Encoder features.
> + uint32_t va_features;
> + // Block size info.
> + uint32_t va_bs;
> uint32_t ctu_size;
> uint32_t min_cb_size;
>
> @@ -427,9 +430,9 @@ static int
> vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> vps->vps_max_latency_increase_plus1[i];
> }
>
> - // These have to come from the capabilities of the encoder. We have no
> - // way to query them, so just hardcode parameters which work on the Intel
> - // driver.
> + // These values come from the capabilities of the first encoder
> + // implementation in the i965 driver on Intel Skylake. They may
> + // fail badly with other platforms or drivers.
> // CTB size from 8x8 to 32x32.
> sps->log2_min_luma_coding_block_size_minus3 = 0;
> sps->log2_diff_max_min_luma_coding_block_size = 2;
> @@ -447,6 +450,42 @@ static int
> vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
>
> sps->pcm_enabled_flag = 0;
>
> +// update sps setting according to queried result
> +#if VA_CHECK_VERSION(1, 13, 0)
> + if (priv->va_features) {
> + VAConfigAttribValEncHEVCFeatures features = { .value = priv-
> >va_features };
> +
> + // Enable feature if get queried result is VA_FEATURE_SUPPORTED |
> VA_FEATURE_REQUIRED
> + sps->amp_enabled_flag =
> + !!features.bits.amp;
> + sps->sample_adaptive_offset_enabled_flag =
> + !!features.bits.sao;
> + sps->sps_temporal_mvp_enabled_flag =
> + !!features.bits.temporal_mvp;
> + sps->pcm_enabled_flag =
> + !!features.bits.pcm;
> + }
> +
> + if (priv->va_bs) {
> + VAConfigAttribValEncHEVCBlockSizes bs = { .value = priv->va_bs };
> + sps->log2_min_luma_coding_block_size_minus3 =
> + ff_ctz(priv->min_cb_size) - 3;
> + sps->log2_diff_max_min_luma_coding_block_size =
> + ff_ctz(priv->ctu_size) - ff_ctz(priv->min_cb_size);
> +
> + sps->log2_min_luma_transform_block_size_minus2 =
> + bs.bits.log2_min_luma_transform_block_size_minus2;
> + sps->log2_diff_max_min_luma_transform_block_size =
> + bs.bits.log2_max_luma_transform_block_size_minus2 -
> + bs.bits.log2_min_luma_transform_block_size_minus2;
> +
> + sps->max_transform_hierarchy_depth_inter =
> + bs.bits.max_max_transform_hierarchy_depth_inter;
> + sps->max_transform_hierarchy_depth_intra =
> + bs.bits.max_max_transform_hierarchy_depth_intra;
> + }
> +#endif
> +
> // STRPSs should ideally be here rather than defined individually in
> // each slice, but the structure isn't completely fixed so for now
> // don't bother.
> @@ -539,6 +578,23 @@ static int
> vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> pps->cu_qp_delta_enabled_flag = (ctx->va_rc_mode != VA_RC_CQP);
> pps->diff_cu_qp_delta_depth = 0;
>
> +// update pps setting according to queried result
> +#if VA_CHECK_VERSION(1, 13, 0)
> + if (priv->va_features) {
> + VAConfigAttribValEncHEVCFeatures features = { .value = priv-
> >va_features };
> + if (ctx->va_rc_mode != VA_RC_CQP)
> + pps->cu_qp_delta_enabled_flag =
> + !!features.bits.cu_qp_delta;
Please fix the indentation
> +
> + pps->transform_skip_enabled_flag =
> + !!features.bits.transform_skip;
> + // set diff_cu_qp_delta_depth as its max value if cu_qp_delta
> enabled. Otherwise
> + // 0 will make cu_qp_delta invalid.
> + if (pps->cu_qp_delta_enabled_flag)
> + pps->diff_cu_qp_delta_depth = sps-
> >log2_diff_max_min_luma_coding_block_size;
> + }
> +#endif
> +
> if (ctx->tile_rows && ctx->tile_cols) {
> int uniform_spacing;
>
> @@ -640,8 +696,8 @@ static int
> vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
>
> .coded_buf = VA_INVALID_ID,
>
> - .collocated_ref_pic_index = 0xff,
> -
> + .collocated_ref_pic_index = sps->sps_temporal_mvp_enabled_flag ?
> + 0 : 0xff,
> .last_picture = 0,
>
> .pic_init_qp = pps->init_qp_minus26 + 26,
> @@ -674,6 +730,8 @@ static int
> vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> .entropy_coding_sync_enabled_flag = pps-
> >entropy_coding_sync_enabled_flag,
> .loop_filter_across_tiles_enabled_flag =
> pps->loop_filter_across_tiles_enabled_flag,
> + .pps_loop_filter_across_slices_enabled_flag =
> + pps->pps_loop_filter_across_slices_enabled_flag,
> .scaling_list_data_present_flag = (sps-
> >sps_scaling_list_data_present_flag |
> pps-
> >pps_scaling_list_data_present_flag),
> .screen_content_flag = 0,
> @@ -1105,6 +1163,45 @@ static av_cold void
> vaapi_encode_h265_get_encoder_caps(AVCodecContext *avctx)
> VAAPIEncodeContext *ctx = avctx->priv_data;
> VAAPIEncodeH265Context *priv = avctx->priv_data;
>
> +#if VA_CHECK_VERSION(1, 13, 0)
> + {
> + VAConfigAttribValEncHEVCBlockSizes block_size;
> + VAConfigAttrib attr;
> + VAStatus vas;
> +
> + attr.type = VAConfigAttribEncHEVCFeatures;
> + vas = vaGetConfigAttributes(ctx->hwctx->display, ctx->va_profile,
> + ctx->va_entrypoint, &attr, 1);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(avctx, AV_LOG_WARNING, "Failed to query encoder "
> + "features, using guessed defaults.\n");
> + } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> + av_log(avctx, AV_LOG_WARNING, "Driver does not advertise "
> + "encoder features, using guessed defaults.\n");
> + } else {
> + priv->va_features = attr.value;
> + }
> +
> + attr.type = VAConfigAttribEncHEVCBlockSizes;
> + vas = vaGetConfigAttributes(ctx->hwctx->display, ctx->va_profile,
> + ctx->va_entrypoint, &attr, 1);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(avctx, AV_LOG_WARNING, "Failed to query encoder "
> + "block size, using guessed defaults.\n");
> + } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> + av_log(avctx, AV_LOG_WARNING, "Driver does not advertise "
> + "encoder block size, using guessed defaults.\n");
> + } else {
> + priv->va_bs = block_size.value = attr.value;
> +
> + priv->ctu_size =
> + 1 << block_size.bits.log2_max_coding_tree_block_size_minus3 +
> 3;
> + priv->min_cb_size =
> + 1 << block_size.bits.log2_min_luma_coding_block_size_minus3 +
> 3;
> + }
> + }
> +#endif
> +
> if (!priv->ctu_size) {
> priv->ctu_size = 32;
> priv->min_cb_size = 16;
Tested with i965 and iHD drivers and it works well for me
Thanks
Haihao
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features
2022-02-18 4:38 ` Xiang, Haihao
@ 2022-02-21 2:21 ` Wang, Fei W
0 siblings, 0 replies; 6+ messages in thread
From: Wang, Fei W @ 2022-02-21 2:21 UTC (permalink / raw)
To: ffmpeg-devel, Xiang, Haihao; +Cc: sw
On Fri, 2022-02-18 at 04:38 +0000, Xiang, Haihao wrote:
> On Fri, 2022-02-18 at 09:43 +0800, Fei Wang wrote:
> > From: Mark Thompson <sw@jkqxz.net>
> >
> > Signed-off-by: Fei Wang <fei.w.wang@intel.com>
> > ---
> > libavcodec/vaapi_encode_h265.c | 107
> > +++++++++++++++++++++++++++++++--
> > 1 file changed, 102 insertions(+), 5 deletions(-)
> >
> > diff --git a/libavcodec/vaapi_encode_h265.c
> > b/libavcodec/vaapi_encode_h265.c
> > index 8319848e4a..e98502503d 100644
> > --- a/libavcodec/vaapi_encode_h265.c
> > +++ b/libavcodec/vaapi_encode_h265.c
> > @@ -56,6 +56,9 @@ typedef struct VAAPIEncodeH265Context {
> > VAAPIEncodeContext common;
> >
> > // Encoder features.
> > + uint32_t va_features;
> > + // Block size info.
> > + uint32_t va_bs;
> > uint32_t ctu_size;
> > uint32_t min_cb_size;
> >
> > @@ -427,9 +430,9 @@ static int
> > vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> > vps->vps_max_latency_increase_plus1[i];
> > }
> >
> > - // These have to come from the capabilities of the
> > encoder. We have no
> > - // way to query them, so just hardcode parameters which work
> > on the Intel
> > - // driver.
> > + // These values come from the capabilities of the first
> > encoder
> > + // implementation in the i965 driver on Intel Skylake. They
> > may
> > + // fail badly with other platforms or drivers.
> > // CTB size from 8x8 to 32x32.
> > sps->log2_min_luma_coding_block_size_minus3 = 0;
> > sps->log2_diff_max_min_luma_coding_block_size = 2;
> > @@ -447,6 +450,42 @@ static int
> > vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> >
> > sps->pcm_enabled_flag = 0;
> >
> > +// update sps setting according to queried result
> > +#if VA_CHECK_VERSION(1, 13, 0)
> > + if (priv->va_features) {
> > + VAConfigAttribValEncHEVCFeatures features = { .value =
> > priv-
> > > va_features };
> > +
> > + // Enable feature if get queried result is
> > VA_FEATURE_SUPPORTED |
> > VA_FEATURE_REQUIRED
> > + sps->amp_enabled_flag =
> > + !!features.bits.amp;
> > + sps->sample_adaptive_offset_enabled_flag =
> > + !!features.bits.sao;
> > + sps->sps_temporal_mvp_enabled_flag =
> > + !!features.bits.temporal_mvp;
> > + sps->pcm_enabled_flag =
> > + !!features.bits.pcm;
> > + }
> > +
> > + if (priv->va_bs) {
> > + VAConfigAttribValEncHEVCBlockSizes bs = { .value = priv-
> > >va_bs };
> > + sps->log2_min_luma_coding_block_size_minus3 =
> > + ff_ctz(priv->min_cb_size) - 3;
> > + sps->log2_diff_max_min_luma_coding_block_size =
> > + ff_ctz(priv->ctu_size) - ff_ctz(priv->min_cb_size);
> > +
> > + sps->log2_min_luma_transform_block_size_minus2 =
> > + bs.bits.log2_min_luma_transform_block_size_minus2;
> > + sps->log2_diff_max_min_luma_transform_block_size =
> > + bs.bits.log2_max_luma_transform_block_size_minus2 -
> > + bs.bits.log2_min_luma_transform_block_size_minus2;
> > +
> > + sps->max_transform_hierarchy_depth_inter =
> > + bs.bits.max_max_transform_hierarchy_depth_inter;
> > + sps->max_transform_hierarchy_depth_intra =
> > + bs.bits.max_max_transform_hierarchy_depth_intra;
> > + }
> > +#endif
> > +
> > // STRPSs should ideally be here rather than defined
> > individually in
> > // each slice, but the structure isn't completely fixed so for
> > now
> > // don't bother.
> > @@ -539,6 +578,23 @@ static int
> > vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> > pps->cu_qp_delta_enabled_flag = (ctx->va_rc_mode !=
> > VA_RC_CQP);
> > pps->diff_cu_qp_delta_depth = 0;
> >
> > +// update pps setting according to queried result
> > +#if VA_CHECK_VERSION(1, 13, 0)
> > + if (priv->va_features) {
> > + VAConfigAttribValEncHEVCFeatures features = { .value =
> > priv-
> > > va_features };
> > + if (ctx->va_rc_mode != VA_RC_CQP)
> > + pps->cu_qp_delta_enabled_flag =
> > + !!features.bits.cu_qp_delta;
>
> Please fix the indentation
Thanks Haihao to help review. Fixed in V2.
Thanks
Fei
>
> > +
> > + pps->transform_skip_enabled_flag =
> > + !!features.bits.transform_skip;
> > + // set diff_cu_qp_delta_depth as its max value if
> > cu_qp_delta
> > enabled. Otherwise
> > + // 0 will make cu_qp_delta invalid.
> > + if (pps->cu_qp_delta_enabled_flag)
> > + pps->diff_cu_qp_delta_depth = sps-
> > > log2_diff_max_min_luma_coding_block_size;
> > + }
> > +#endif
> > +
> > if (ctx->tile_rows && ctx->tile_cols) {
> > int uniform_spacing;
> >
> > @@ -640,8 +696,8 @@ static int
> > vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> >
> > .coded_buf = VA_INVALID_ID,
> >
> > - .collocated_ref_pic_index = 0xff,
> > -
> > + .collocated_ref_pic_index = sps-
> > >sps_temporal_mvp_enabled_flag ?
> > + 0 : 0xff,
> > .last_picture = 0,
> >
> > .pic_init_qp = pps->init_qp_minus26 + 26,
> > @@ -674,6 +730,8 @@ static int
> > vaapi_encode_h265_init_sequence_params(AVCodecContext *avctx)
> > .entropy_coding_sync_enabled_flag = pps-
> > > entropy_coding_sync_enabled_flag,
> > .loop_filter_across_tiles_enabled_flag =
> > pps->loop_filter_across_tiles_enabled_flag,
> > + .pps_loop_filter_across_slices_enabled_flag =
> > + pps->pps_loop_filter_across_slices_enabled_flag,
> > .scaling_list_data_present_flag = (sps-
> > > sps_scaling_list_data_present_flag |
> > pps-
> > > pps_scaling_list_data_present_flag),
> > .screen_content_flag = 0,
> > @@ -1105,6 +1163,45 @@ static av_cold void
> > vaapi_encode_h265_get_encoder_caps(AVCodecContext *avctx)
> > VAAPIEncodeContext *ctx = avctx->priv_data;
> > VAAPIEncodeH265Context *priv = avctx->priv_data;
> >
> > +#if VA_CHECK_VERSION(1, 13, 0)
> > + {
> > + VAConfigAttribValEncHEVCBlockSizes block_size;
> > + VAConfigAttrib attr;
> > + VAStatus vas;
> > +
> > + attr.type = VAConfigAttribEncHEVCFeatures;
> > + vas = vaGetConfigAttributes(ctx->hwctx->display, ctx-
> > >va_profile,
> > + ctx->va_entrypoint, &attr, 1);
> > + if (vas != VA_STATUS_SUCCESS) {
> > + av_log(avctx, AV_LOG_WARNING, "Failed to query encoder
> > "
> > + "features, using guessed defaults.\n");
> > + } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> > + av_log(avctx, AV_LOG_WARNING, "Driver does not
> > advertise "
> > + "encoder features, using guessed defaults.\n");
> > + } else {
> > + priv->va_features = attr.value;
> > + }
> > +
> > + attr.type = VAConfigAttribEncHEVCBlockSizes;
> > + vas = vaGetConfigAttributes(ctx->hwctx->display, ctx-
> > >va_profile,
> > + ctx->va_entrypoint, &attr, 1);
> > + if (vas != VA_STATUS_SUCCESS) {
> > + av_log(avctx, AV_LOG_WARNING, "Failed to query encoder
> > "
> > + "block size, using guessed defaults.\n");
> > + } else if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> > + av_log(avctx, AV_LOG_WARNING, "Driver does not
> > advertise "
> > + "encoder block size, using guessed
> > defaults.\n");
> > + } else {
> > + priv->va_bs = block_size.value = attr.value;
> > +
> > + priv->ctu_size =
> > + 1 <<
> > block_size.bits.log2_max_coding_tree_block_size_minus3 +
> > 3;
> > + priv->min_cb_size =
> > + 1 <<
> > block_size.bits.log2_min_luma_coding_block_size_minus3 +
> > 3;
> > + }
> > + }
> > +#endif
> > +
> > if (!priv->ctu_size) {
> > priv->ctu_size = 32;
> > priv->min_cb_size = 16;
>
> Tested with i965 and iHD drivers and it works well for me
>
> Thanks
> Haihao
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-02-21 2:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-18 1:42 [FFmpeg-devel] [PATCH v1 1/4] lavc/vaapi_encode_h265: Add P frame to GPB frame support for hevc_vaapi Fei Wang
2022-02-18 1:42 ` [FFmpeg-devel] [PATCH v1 2/4] vaapi_encode: Move block size calculation after entrypoint selection Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 3/4] vaapi_encode_h265: Explicitly set and correct some flags Fei Wang
2022-02-18 1:43 ` [FFmpeg-devel] [PATCH v1 4/4] vaapi_encode_h265: Query encoding block sizes and features Fei Wang
2022-02-18 4:38 ` Xiang, Haihao
2022-02-21 2:21 ` Wang, Fei W
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git