From: Michael Niedermayer <michael@niedermayer.cc> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH 4/4] avformat: add Argonaut Games CVG muxer Date: Mon, 14 Feb 2022 20:32:56 +0100 Message-ID: <20220214193256.GF2829255@pb2> (raw) In-Reply-To: <20210503113157.2215-4-zane@zanevaniperen.com> [-- Attachment #1.1: Type: text/plain, Size: 6335 bytes --] On Mon, May 03, 2021 at 09:31:57PM +1000, Zane van Iperen wrote: > Signed-off-by: Zane van Iperen <zane@zanevaniperen.com> > --- > Changelog | 1 + > libavformat/Makefile | 1 + > libavformat/allformats.c | 1 + > libavformat/argo_cvg.c | 149 ++++++++++++++++++++++++++++++++++++++- > libavformat/version.h | 2 +- > 5 files changed, 152 insertions(+), 2 deletions(-) > > diff --git a/Changelog b/Changelog > index 9567009d63..41b1690dfd 100644 > --- a/Changelog > +++ b/Changelog > @@ -5,6 +5,7 @@ version <next>: > - ADPCM IMA Westwood encoder > - Westwood AUD muxer > - Argonaut Games CVG demuxer > +- Argonaut Games CVG muxer > > > version 4.4: > diff --git a/libavformat/Makefile b/libavformat/Makefile > index 0dca1ffd77..c9ef564523 100644 > --- a/libavformat/Makefile > +++ b/libavformat/Makefile > @@ -108,6 +108,7 @@ OBJS-$(CONFIG_ARGO_ASF_DEMUXER) += argo_asf.o > OBJS-$(CONFIG_ARGO_ASF_MUXER) += argo_asf.o > OBJS-$(CONFIG_ARGO_BRP_DEMUXER) += argo_brp.o argo_asf.o > OBJS-$(CONFIG_ARGO_CVG_DEMUXER) += argo_cvg.o > +OBJS-$(CONFIG_ARGO_CVG_MUXER) += argo_cvg.o > OBJS-$(CONFIG_ASF_DEMUXER) += asfdec_f.o asf.o asfcrypt.o \ > avlanguage.o > OBJS-$(CONFIG_ASF_O_DEMUXER) += asfdec_o.o asf.o asfcrypt.o \ > diff --git a/libavformat/allformats.c b/libavformat/allformats.c > index 923af3f649..111ca3cbf0 100644 > --- a/libavformat/allformats.c > +++ b/libavformat/allformats.c > @@ -67,6 +67,7 @@ extern const AVInputFormat ff_argo_asf_demuxer; > extern const AVOutputFormat ff_argo_asf_muxer; > extern const AVInputFormat ff_argo_brp_demuxer; > extern const AVInputFormat ff_argo_cvg_demuxer; > +extern const AVOutputFormat ff_argo_cvg_muxer; > extern const AVInputFormat ff_asf_demuxer; > extern const AVOutputFormat ff_asf_muxer; > extern const AVInputFormat ff_asf_o_demuxer; > diff --git a/libavformat/argo_cvg.c b/libavformat/argo_cvg.c > index 2851c1649f..f0d9f3e076 100644 > --- a/libavformat/argo_cvg.c > +++ b/libavformat/argo_cvg.c > @@ -1,5 +1,5 @@ > /* > - * Argonaut Games CVG demuxer > + * Argonaut Games CVG (de)muxer > * > * Copyright (C) 2021 Zane van Iperen (zane@zanevaniperen.com) > * > @@ -21,6 +21,7 @@ > */ > #include "avformat.h" > #include "internal.h" > +#include "libavutil/opt.h" > #include "libavutil/intreadwrite.h" > > /* > @@ -53,6 +54,14 @@ typedef struct ArgoCVGDemuxContext { > uint32_t blocks_read; > } ArgoCVGDemuxContext; > > +typedef struct ArgoCVGMuxContext { > + const AVClass *class; > + int skip_rate_check; > + uint32_t checksum; > + size_t size; > +} ArgoCVGMuxContext; > + > +#if CONFIG_ARGO_CVG_DEMUXER > /* "Special" files that are played at a different rate. */ > static ArgoCVGOverride overrides[] = { > { "CRYS.CVG", { 23592, 0, 1 }, 2495499, 88200 }, /* Beta */ > @@ -243,3 +252,141 @@ const AVInputFormat ff_argo_cvg_demuxer = { > .read_packet = argo_cvg_read_packet, > .read_seek = argo_cvg_seek, > }; > +#endif > + > +#if CONFIG_ARGO_CVG_MUXER > +static int argo_cvg_write_init(AVFormatContext *s) > +{ > + ArgoCVGMuxContext *ctx = s->priv_data; > + const AVCodecParameters *par; > + > + if (s->nb_streams != 1) { > + av_log(s, AV_LOG_ERROR, "CVG files have exactly one stream\n"); > + return AVERROR(EINVAL); > + } > + > + par = s->streams[0]->codecpar; > + > + if (par->codec_id != AV_CODEC_ID_ADPCM_PSX) { > + av_log(s, AV_LOG_ERROR, "%s codec not supported\n", > + avcodec_get_name(par->codec_id)); > + return AVERROR(EINVAL); > + } > + > + if (par->channels != 1) { > + av_log(s, AV_LOG_ERROR, "CVG files only support 1 channel\n"); > + return AVERROR(EINVAL); > + } > + > + if (par->block_align != ARGO_CVG_BLOCK_ALIGN) > + return AVERROR(EINVAL); > + > + if (!ctx->skip_rate_check && par->sample_rate != 22050) { > + av_log(s, AV_LOG_ERROR, "Sample rate must be 22050\n"); > + return AVERROR(EINVAL); > + } > + > + if (!(s->pb->seekable & AVIO_SEEKABLE_NORMAL)) { > + av_log(s, AV_LOG_ERROR, "Stream not seekable, unable to write output file\n"); > + return AVERROR(EINVAL); > + } > + > + return 0; > +} > + > +static int argo_cvg_write_header(AVFormatContext *s) > +{ > + ArgoCVGMuxContext *ctx = s->priv_data; > + > + avio_wl32(s->pb, 0); /* Size, fixed later. */ > + avio_wl32(s->pb, 0); > + avio_wl32(s->pb, 1); > + > + ctx->checksum = 1; > + ctx->size = 8; > + return 0; > +} > + > +static int argo_cvg_write_packet(AVFormatContext *s, AVPacket *pkt) > +{ > + ArgoCVGMuxContext *ctx = s->priv_data; > + AVCodecParameters *par = s->streams[0]->codecpar; > + > + if (pkt->size % par->block_align != 0) > + return AVERROR_INVALIDDATA; > + > + avio_write(s->pb, pkt->data, pkt->size); > + > + ctx->size += pkt->size; > + > + if (ctx->size > UINT32_MAX) > + return AVERROR_INVALIDDATA; > + > + for (int i = 0; i < pkt->size; i++) > + ctx->checksum += pkt->data[i]; > + > + return 0; > +} > + > +static int argo_cvg_write_trailer(AVFormatContext *s) > +{ > + ArgoCVGMuxContext *ctx = s->priv_data; > + int64_t ret; > + > + av_log(s, AV_LOG_TRACE, "size = %zu\n", ctx->size); > + av_log(s, AV_LOG_TRACE, "checksum = %u\n", ctx->checksum); > + > + /* > + * NB: This is wrong. We're always slightly under the original. > + * Verified by remuxing. For reference (orig - remuxed): > + * - TCLD.CVG: 4706074 - 4705696 = 378 > + * - DANLOOP1.CVG: 5684641 - 5684212 = 429 > + * - CRYS.CVG: 2495499 - 2495367 = 132 > + * - PICKUP88.CVG: 1348091 - 1347937 = 154 > + * - SELECT1.CVG: 549987 - 549752 = 235 Are these files available somewhere ? thx [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB I am the wisest man alive, for I know one thing, and that is that I know nothing. -- Socrates [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 195 bytes --] [-- Attachment #2: Type: text/plain, Size: 251 bytes --] _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next parent reply other threads:[~2022-02-14 19:33 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <20210503113157.2215-1-zane@zanevaniperen.com> [not found] ` <20210503113157.2215-4-zane@zanevaniperen.com> 2022-02-14 19:32 ` Michael Niedermayer [this message] 2022-02-15 0:09 ` Zane van Iperen 2022-02-15 13:06 ` Michael Niedermayer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220214193256.GF2829255@pb2 \ --to=michael@niedermayer.cc \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git