From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH V3 2/3] libavcodec/vaapi_encode: Change the way to call async to increase performance
Date: Tue, 8 Feb 2022 11:05:48 +0800
Message-ID: <20220208030549.340748-2-wenbin.chen@intel.com> (raw)
In-Reply-To: <20220208030549.340748-1-wenbin.chen@intel.com>
Fix: #7706. After commit 5fdcf85bbffe7451c2, vaapi encoder's performance
decrease. The reason is that vaRenderPicture() and vaSyncBuffer() are
called at the same time (vaRenderPicture() always followed by a
vaSyncBuffer()). When we encode stream with B frames, we need buffer to
reorder frames, so we can send serveral frames to HW at once to increase
performance. Now I changed them to be called in a asynchronous way, which
will make better use of hardware. 1080p transcoding increases about 17%
fps on my environment.
This change fits vaSyncBuffer(), so if driver does not support
vaSyncBuffer, it will keep previous operation.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
---
libavcodec/vaapi_encode.c | 64 ++++++++++++++++++++++++++++++++-------
libavcodec/vaapi_encode.h | 5 +++
2 files changed, 58 insertions(+), 11 deletions(-)
diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
index b87b58a42b..15ddbbaa4a 100644
--- a/libavcodec/vaapi_encode.c
+++ b/libavcodec/vaapi_encode.c
@@ -984,8 +984,10 @@ static int vaapi_encode_pick_next(AVCodecContext *avctx,
if (!pic && ctx->end_of_stream) {
--b_counter;
pic = ctx->pic_end;
- if (pic->encode_issued)
+ if (pic->encode_complete)
return AVERROR_EOF;
+ else if (pic->encode_issued)
+ return AVERROR(EAGAIN);
}
if (!pic) {
@@ -1210,18 +1212,44 @@ int ff_vaapi_encode_receive_packet(AVCodecContext *avctx, AVPacket *pkt)
return AVERROR(EAGAIN);
}
- pic = NULL;
- err = vaapi_encode_pick_next(avctx, &pic);
- if (err < 0)
- return err;
- av_assert0(pic);
+#if VA_CHECK_VERSION(1, 9, 0)
+ if (ctx->has_sync_buffer_func) {
+ while (av_fifo_can_read(ctx->encode_fifo) <= MAX_PICTURE_REFERENCES) {
+ pic = NULL;
+ err = vaapi_encode_pick_next(avctx, &pic);
+ if (err < 0)
+ break;
+
+ av_assert0(pic);
+ pic->encode_order = ctx->encode_order +
+ av_fifo_can_read(ctx->encode_fifo);
+ err = vaapi_encode_issue(avctx, pic);
+ if (err < 0) {
+ av_log(avctx, AV_LOG_ERROR, "Encode failed: %d.\n", err);
+ return err;
+ }
+ av_fifo_write(ctx->encode_fifo, &pic, 1);
+ }
+ if (!av_fifo_can_read(ctx->encode_fifo))
+ return err;
+ av_fifo_read(ctx->encode_fifo, &pic, 1);
+ ctx->encode_order = pic->encode_order + 1;
+ } else
+#endif
+ {
+ pic = NULL;
+ err = vaapi_encode_pick_next(avctx, &pic);
+ if (err < 0)
+ return err;
+ av_assert0(pic);
- pic->encode_order = ctx->encode_order++;
+ pic->encode_order = ctx->encode_order++;
- err = vaapi_encode_issue(avctx, pic);
- if (err < 0) {
- av_log(avctx, AV_LOG_ERROR, "Encode failed: %d.\n", err);
- return err;
+ err = vaapi_encode_issue(avctx, pic);
+ if (err < 0) {
+ av_log(avctx, AV_LOG_ERROR, "Encode failed: %d.\n", err);
+ return err;
+ }
}
err = vaapi_encode_output(avctx, pic, pkt);
@@ -2555,6 +2583,19 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
}
}
+#if VA_CHECK_VERSION(1, 9, 0)
+ //check vaSyncBuffer function
+ vas = vaSyncBuffer(ctx->hwctx->display, 0, 0);
+ if (vas != VA_STATUS_ERROR_UNIMPLEMENTED) {
+ ctx->has_sync_buffer_func = 1;
+ ctx->encode_fifo = av_fifo_alloc2(MAX_PICTURE_REFERENCES + 1,
+ sizeof(VAAPIEncodePicture *),
+ 0);
+ if (!ctx->encode_fifo)
+ return AVERROR(ENOMEM);
+ }
+#endif
+
return 0;
fail:
@@ -2592,6 +2633,7 @@ av_cold int ff_vaapi_encode_close(AVCodecContext *avctx)
av_freep(&ctx->codec_sequence_params);
av_freep(&ctx->codec_picture_params);
+ av_fifo_freep2(&ctx->encode_fifo);
av_buffer_unref(&ctx->recon_frames_ref);
av_buffer_unref(&ctx->input_frames_ref);
diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
index b41604a883..d33a486cb8 100644
--- a/libavcodec/vaapi_encode.h
+++ b/libavcodec/vaapi_encode.h
@@ -29,6 +29,7 @@
#include "libavutil/hwcontext.h"
#include "libavutil/hwcontext_vaapi.h"
+#include "libavutil/fifo.h"
#include "avcodec.h"
#include "hwconfig.h"
@@ -345,6 +346,10 @@ typedef struct VAAPIEncodeContext {
int roi_warned;
AVFrame *frame;
+ //Store buffered pic
+ AVFifo *encode_fifo;
+ //Whether the driver support vaSyncBuffer
+ int has_sync_buffer_func;
} VAAPIEncodeContext;
enum {
--
2.32.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-02-08 3:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-08 3:05 [FFmpeg-devel] [PATCH V3 1/3] libavcodec/vaapi_encode: Add new API adaption to vaapi_encode Wenbin Chen
2022-02-08 3:05 ` Wenbin Chen [this message]
2022-02-11 4:24 ` [FFmpeg-devel] [PATCH V3 2/3] libavcodec/vaapi_encode: Change the way to call async to increase performance Xiang, Haihao
2022-02-08 3:05 ` [FFmpeg-devel] [PATCH V3 3/3] libavcodec/vaapi_encode: Add async_depth to vaapi_encoder " Wenbin Chen
2022-02-09 6:22 ` Chen, Wenbin
2022-02-11 4:43 ` Xiang, Haihao
2022-02-11 4:07 ` [FFmpeg-devel] [PATCH V3 1/3] libavcodec/vaapi_encode: Add new API adaption to vaapi_encode Xiang, Haihao
2022-02-11 5:16 ` Chen, Wenbin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220208030549.340748-2-wenbin.chen@intel.com \
--to=wenbin.chen-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git