From: Wenbin Chen <wenbin.chen-at-intel.com@ffmpeg.org> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH V2 3/3] libavcodec/vaapi_encode: Add async_depth to vaapi_encoder to increase performance Date: Wed, 5 Jan 2022 10:48:10 +0800 Message-ID: <20220105024810.435597-3-wenbin.chen@intel.com> (raw) In-Reply-To: <20220105024810.435597-1-wenbin.chen@intel.com> Add async_depth to increase encoder's performance. Reuse encode_fifo as async buffer. Encoder puts all reordered frame to HW and then check fifo size. If fifo < async_depth and the top frame is not ready, it will return AVERROR(EAGAIN) to require more frames. 1080p transcoding (no B frames) with -async_depth=4 can increase 20% performance on my environment. The async increases performance but also introduces frame delay. Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> --- libavcodec/vaapi_encode.c | 19 ++++++++++++++----- libavcodec/vaapi_encode.h | 12 ++++++++++-- 2 files changed, 24 insertions(+), 7 deletions(-) diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c index 9a3b3ba4ad..f9ffca0475 100644 --- a/libavcodec/vaapi_encode.c +++ b/libavcodec/vaapi_encode.c @@ -1158,7 +1158,8 @@ static int vaapi_encode_send_frame(AVCodecContext *avctx, AVFrame *frame) if (ctx->input_order == ctx->decode_delay) ctx->dts_pts_diff = pic->pts - ctx->first_pts; if (ctx->output_delay > 0) - ctx->ts_ring[ctx->input_order % (3 * ctx->output_delay)] = pic->pts; + ctx->ts_ring[ctx->input_order % + (3 * ctx->output_delay + ctx->async_depth)] = pic->pts; pic->display_order = ctx->input_order; ++ctx->input_order; @@ -1214,8 +1215,8 @@ int ff_vaapi_encode_receive_packet(AVCodecContext *avctx, AVPacket *pkt) #if VA_CHECK_VERSION(1, 9, 0) if (ctx->has_sync_buffer_func) { - while (av_fifo_size(ctx->encode_fifo) <= - MAX_PICTURE_REFERENCES * sizeof(VAAPIEncodePicture *)) { + while (av_fifo_size(ctx->encode_fifo) < + MAX_ASYNC_DEPTH * sizeof(VAAPIEncodePicture *)) { pic = NULL; err = vaapi_encode_pick_next(avctx, &pic); if (err < 0) @@ -1233,6 +1234,14 @@ int ff_vaapi_encode_receive_packet(AVCodecContext *avctx, AVPacket *pkt) } if (!av_fifo_size(ctx->encode_fifo)) return err; + if (av_fifo_size(ctx->encode_fifo) < + ctx->async_depth * sizeof(VAAPIEncodePicture *) && + !ctx->end_of_stream) { + av_fifo_generic_peek(ctx->encode_fifo, &pic, sizeof(pic), NULL); + err = vaapi_encode_wait(avctx, pic, 0); + if (err < 0) + return err; + } av_fifo_generic_read(ctx->encode_fifo, &pic, sizeof(pic), NULL); ctx->encode_order = pic->encode_order + 1; } else @@ -1268,7 +1277,7 @@ int ff_vaapi_encode_receive_packet(AVCodecContext *avctx, AVPacket *pkt) pkt->dts = ctx->ts_ring[pic->encode_order] - ctx->dts_pts_diff; } else { pkt->dts = ctx->ts_ring[(pic->encode_order - ctx->decode_delay) % - (3 * ctx->output_delay)]; + (3 * ctx->output_delay + ctx->async_depth)]; } av_log(avctx, AV_LOG_DEBUG, "Output packet: pts %"PRId64" dts %"PRId64".\n", pkt->pts, pkt->dts); @@ -2589,7 +2598,7 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx) vas = vaSyncBuffer(ctx->hwctx->display, 0, 0); if (vas != VA_STATUS_ERROR_UNIMPLEMENTED) { ctx->has_sync_buffer_func = 1; - ctx->encode_fifo = av_fifo_alloc((MAX_PICTURE_REFERENCES + 1) * + ctx->encode_fifo = av_fifo_alloc(MAX_ASYNC_DEPTH * sizeof(VAAPIEncodePicture *)); if (!ctx->encode_fifo) return AVERROR(ENOMEM); diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h index 560a1c42a9..1a5824e702 100644 --- a/libavcodec/vaapi_encode.h +++ b/libavcodec/vaapi_encode.h @@ -48,6 +48,7 @@ enum { MAX_TILE_ROWS = 22, // A.4.1: table A.6 allows at most 20 tile columns for any level. MAX_TILE_COLS = 20, + MAX_ASYNC_DEPTH = 64, }; extern const AVCodecHWConfigInternal *const ff_vaapi_encode_hw_configs[]; @@ -298,7 +299,8 @@ typedef struct VAAPIEncodeContext { // Timestamp handling. int64_t first_pts; int64_t dts_pts_diff; - int64_t ts_ring[MAX_REORDER_DELAY * 3]; + int64_t ts_ring[MAX_REORDER_DELAY * 3 + + MAX_ASYNC_DEPTH]; // Slice structure. int slice_block_rows; @@ -350,6 +352,8 @@ typedef struct VAAPIEncodeContext { AVFifoBuffer *encode_fifo; //Whether the driver support vaSyncBuffer int has_sync_buffer_func; + //Max number of frame buffered in encoder. + int async_depth; } VAAPIEncodeContext; enum { @@ -460,7 +464,11 @@ int ff_vaapi_encode_close(AVCodecContext *avctx); { "b_depth", \ "Maximum B-frame reference depth", \ OFFSET(common.desired_b_depth), AV_OPT_TYPE_INT, \ - { .i64 = 1 }, 1, INT_MAX, FLAGS } + { .i64 = 1 }, 1, INT_MAX, FLAGS }, \ + { "async_depth", "Maximum processing parallelism. " \ + "Increase this to improve single channel performance", \ + OFFSET(common.async_depth), AV_OPT_TYPE_INT, \ + { .i64 = 4 }, 0, MAX_ASYNC_DEPTH, FLAGS } #define VAAPI_ENCODE_RC_MODE(name, desc) \ { #name, desc, 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_ ## name }, \ -- 2.25.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
prev parent reply other threads:[~2022-01-05 2:48 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-05 2:48 [FFmpeg-devel] [PATCH V2 1/3] libavcodec/vaapi_encode: Add new API adaption to vaapi_encode Wenbin Chen 2022-01-05 2:48 ` [FFmpeg-devel] [PATCH V2 2/3] libavcodec/vaapi_encode: Change the way to call async to increase performance Wenbin Chen 2022-01-05 5:45 ` Andreas Rheinhardt 2022-01-05 7:59 ` Chen, Wenbin 2022-01-06 8:41 ` Andreas Rheinhardt 2022-02-07 4:07 ` Xiang, Haihao 2022-02-07 5:20 ` Chen, Wenbin 2022-01-05 2:48 ` Wenbin Chen [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220105024810.435597-3-wenbin.chen@intel.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git