From: "Wujian(Chin)" <wujian2@huawei.com> To: "ffmpeg-devel@ffmpeg.org" <ffmpeg-devel@ffmpeg.org> Cc: "zhangxiong \(A\)" <zhangxiong3@huawei.com>, "wangqinghua \(I\)" <wangqinghua9@huawei.com> Subject: [FFmpeg-devel] [PATCH] fftools/ffmpeg_ffplay_ffprobe_cmdutils: add -safe to replace the user name and password in the protocol address Date: Sat, 17 Dec 2022 07:36:34 +0000 Message-ID: <1f01a2a041ba4e809ec8d9175fde8d8e@huawei.com> (raw) The Protocol address may contain the user name and password. The ps -ef command may expose the plaintext. The -safe parameter option is added to replace the user name and password in the command line with the asterisk (*). Signed-off-by: wujian_nanjing <wujian2@huawei.com> --- doc/ffmpeg.texi | 7 +++++++ doc/ffplay.texi | 8 ++++++++ doc/ffprobe.texi | 7 +++++++ fftools/cmdutils.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- fftools/cmdutils.h | 15 +++++++++++++++ fftools/ffmpeg.c | 16 +++++++++++++--- fftools/ffplay.c | 15 +++++++++++++-- fftools/ffprobe.c | 18 ++++++++++++++---- 8 files changed, 120 insertions(+), 13 deletions(-) diff --git a/doc/ffmpeg.texi b/doc/ffmpeg.texi index 0367930..e905542 100644 --- a/doc/ffmpeg.texi +++ b/doc/ffmpeg.texi @@ -50,6 +50,13 @@ output files. Also do not mix options which belong to different files. All options apply ONLY to the next input or output file and are reset between files. @itemize +@item -safe +The Protocol address may contain the user name and password. The ps -ef command may expose the plaintext. +The -safe parameter option is added to replace the user name and password in the command line with the asterisk (*). +@example +ffmpeg -safe -i rtsp://username@password.xxxx.com +@end example + @item To set the video bitrate of the output file to 64 kbit/s: @example diff --git a/doc/ffplay.texi b/doc/ffplay.texi index 5dd860b..f46ca91 100644 --- a/doc/ffplay.texi +++ b/doc/ffplay.texi @@ -122,6 +122,14 @@ Read @var{input_url}. @section Advanced options @table @option + +@item -safe +The Protocol address may contain the user name and password. The ps -ef command may expose the plaintext. +The -safe parameter option is added to replace the user name and password in the command line with the asterisk (*). +@example +ffplay -safe -i rtsp://username@password.xxxx.com +@end example + @item -stats Print several playback statistics, in particular show the stream duration, the codec parameters, the current position in the stream and diff --git a/doc/ffprobe.texi b/doc/ffprobe.texi index 4dc9f57..92b13cf 100644 --- a/doc/ffprobe.texi +++ b/doc/ffprobe.texi @@ -89,6 +89,13 @@ Set the output printing format. @var{writer_name} specifies the name of the writer, and @var{writer_options} specifies the options to be passed to the writer. +@item -safe +The Protocol address may contain the user name and password. The ps -ef command may expose the plaintext. +The -safe parameter option is added to replace the user name and password in the command line with the asterisk (*). +@example +ffprobe -safe -i rtsp://username@password.xxxx.com +@end example + For example for printing the output in JSON format, specify: @example -print_format json diff --git a/fftools/cmdutils.c b/fftools/cmdutils.c index a1de621..22407f8 100644 --- a/fftools/cmdutils.c +++ b/fftools/cmdutils.c @@ -61,6 +61,40 @@ AVDictionary *format_opts, *codec_opts; int hide_banner = 0; +void param_masking(int argc, char **argv) { + int i, j; + for (i = 1; i < argc; i++) { + char *match = strstr(argv[i], "://"); + if (match) { + int total = strlen(argv[i]); + for (j = 0; j < total; j++) { + argv[i][j] = '*'; + } + } + } +} + +char **copy_argv(int argc, char **argv) { + char **argv2; + argv2 = av_mallocz(argc * sizeof(char *)); + if (!argv2) + exit_program(1); + + for (int i = 0; i < argc; i++) { + int length = strlen(argv[i]) + 1; + argv2[i] = av_mallocz(length * sizeof(char *)); + if (!argv2[i]) + exit_program(1); + memcpy(argv2[i], argv[i], length - 1); + } + return argv2; +} + +void free_pp(int argc, char **argv) { + for (int i = 0; i < argc; i++) + av_free(argv[i]); + av_free(argv); +} void uninit_opts(void) { av_dict_free(&swr_opts); @@ -215,13 +249,13 @@ static void prepare_app_arguments(int *argc_ptr, char ***argv_ptr) if (win32_argv_utf8) { *argc_ptr = win32_argc; *argv_ptr = win32_argv_utf8; - return; + goto end; } win32_argc = 0; argv_w = CommandLineToArgvW(GetCommandLineW(), &win32_argc); if (win32_argc <= 0 || !argv_w) - return; + goto end; /* determine the UTF-8 buffer size (including NULL-termination symbols) */ for (i = 0; i < win32_argc; i++) @@ -232,7 +266,7 @@ static void prepare_app_arguments(int *argc_ptr, char ***argv_ptr) argstr_flat = (char *)win32_argv_utf8 + sizeof(char *) * (win32_argc + 1); if (!win32_argv_utf8) { LocalFree(argv_w); - return; + goto end; } for (i = 0; i < win32_argc; i++) { @@ -243,9 +277,14 @@ static void prepare_app_arguments(int *argc_ptr, char ***argv_ptr) } win32_argv_utf8[i] = NULL; LocalFree(argv_w); - *argc_ptr = win32_argc; *argv_ptr = win32_argv_utf8; +end: + if (*argc_ptr > 1 && !strcmp((*argv_ptr)[1], "-safe")) { + (*argv_ptr)[1] = (*argv_ptr)[0]; + (*argc_ptr)--; + (*argv_ptr)++; + } } #else static inline void prepare_app_arguments(int *argc_ptr, char ***argv_ptr) diff --git a/fftools/cmdutils.h b/fftools/cmdutils.h index 4496221..ce4c1db 100644 --- a/fftools/cmdutils.h +++ b/fftools/cmdutils.h @@ -50,6 +50,21 @@ extern AVDictionary *format_opts, *codec_opts; extern int hide_banner; /** + * Using to masking sensitive info. + */ +void param_masking(int argc, char **argv); + +/** + * Using to copy ori argv. + */ +char **copy_argv(int argc, char **argv); + +/** + * Free ** + */ +void free_pp(int argc, char **argv); + +/** * Register a program-specific cleanup routine. */ void register_exit(void (*cb)(int ret)); diff --git a/fftools/ffmpeg.c b/fftools/ffmpeg.c index 881d6f0..f77e850 100644 --- a/fftools/ffmpeg.c +++ b/fftools/ffmpeg.c @@ -3865,9 +3865,9 @@ static int64_t getmaxrss(void) int main(int argc, char **argv) { - int ret; + int ret, safeFlag; BenchmarkTimeStamps ti; - + char **argv2; init_dynload(); register_exit(ffmpeg_cleanup); @@ -3877,15 +3877,25 @@ int main(int argc, char **argv) av_log_set_flags(AV_LOG_SKIP_REPEATED); parse_loglevel(argc, argv, options); + safeFlag = 0; + if (argc > 1 && !strcmp(argv[1], "-safe")) { + argv[1] = argv[0]; + safeFlag = 1; + argc--; + argv++; + } #if CONFIG_AVDEVICE avdevice_register_all(); #endif avformat_network_init(); show_banner(argc, argv, options); + argv2 = copy_argv(argc, argv); + if (safeFlag) + param_masking(argc, argv); /* parse options and open all input/output files */ - ret = ffmpeg_parse_options(argc, argv); + ret = ffmpeg_parse_options(argc, argv2); if (ret < 0) exit_program(1); diff --git a/fftools/ffplay.c b/fftools/ffplay.c index fc7e1c2..f9e6c91 100644 --- a/fftools/ffplay.c +++ b/fftools/ffplay.c @@ -3663,10 +3663,18 @@ void show_help_default(const char *opt, const char *arg) /* Called from the main */ int main(int argc, char **argv) { - int flags; + int flags, safeFlag; + char **argv2; VideoState *is; init_dynload(); + safeFlag = 0; + if (argc > 1 && !strcmp(argv[1], "-safe")) { + argv[1] = argv[0]; + safeFlag = 1; + argc--; + argv++; + } av_log_set_flags(AV_LOG_SKIP_REPEATED); parse_loglevel(argc, argv, options); @@ -3682,7 +3690,10 @@ int main(int argc, char **argv) show_banner(argc, argv, options); - parse_options(NULL, argc, argv, options, opt_input_file); + argv2 = copy_argv(argc, argv); + parse_options(NULL, argc, argv2, options, opt_input_file); + if (safeFlag) + param_masking(argc, argv); if (!input_filename) { show_usage(); diff --git a/fftools/ffprobe.c b/fftools/ffprobe.c index d2f126d..8d4d1e9 100644 --- a/fftools/ffprobe.c +++ b/fftools/ffprobe.c @@ -4035,9 +4035,16 @@ int main(int argc, char **argv) WriterContext *wctx; char *buf; char *w_name = NULL, *w_args = NULL; - int ret, input_ret, i; - + int ret, input_ret, i, safeFlag; + char **argv2; init_dynload(); + safeFlag = 0; + if (argc > 1 && !strcmp(argv[1], "-safe")) { + argv[1] = argv[0]; + safeFlag = 1; + argc--; + argv++; + } #if HAVE_THREADS ret = pthread_mutex_init(&log_mutex, NULL); @@ -4056,8 +4063,10 @@ int main(int argc, char **argv) #endif show_banner(argc, argv, options); - parse_options(NULL, argc, argv, options, opt_input_file); - + argv2 = copy_argv(argc, argv); + parse_options(NULL, argc, argv2, options, opt_input_file); + if (safeFlag) + param_masking(argc, argv); if (do_show_log) av_log_set_callback(log_callback); @@ -4173,6 +4182,7 @@ end: av_freep(&print_format); av_freep(&read_intervals); av_hash_freep(&hash); + free_pp(argc, argv2); uninit_opts(); for (i = 0; i < FF_ARRAY_ELEMS(sections); i++) -- 2.7.4 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-12-17 7:36 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-17 7:36 Wujian(Chin) [this message] 2022-12-18 0:45 ` Carl Eugen Hoyos 2022-12-19 2:49 ` [FFmpeg-devel] 答复: " Wujian(Chin) 2022-12-18 1:07 ` [FFmpeg-devel] " Timo Rothenpieler 2022-12-19 2:35 ` [FFmpeg-devel] 答复: " Wujian(Chin) 2022-12-19 3:34 ` [FFmpeg-devel] " "zhilizhao(赵志立)" 2022-12-19 6:50 ` [FFmpeg-devel] 答复: " Wujian(Chin) 2022-12-19 7:27 ` [FFmpeg-devel] " "zhilizhao(赵志立)" 2022-12-19 9:29 ` [FFmpeg-devel] 答复: " Wujian(Chin) 2022-12-19 10:09 ` Gyan Doshi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1f01a2a041ba4e809ec8d9175fde8d8e@huawei.com \ --to=wujian2@huawei.com \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=wangqinghua9@huawei.com \ --cc=zhangxiong3@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git